Search results

This article focuses on the assessment of entrepreneurship competence by selected vocational teachers in Italy. The exploratory research question addresses the extent to which entrepreneurship assessments are competence based, and the research seeks to identify fully fledged assessment programmes with both a formative and summative component, and the use of assessment rubrics. It also explores the extent to which entrepreneurship competence is referred to in school documentation and later assessed, and the tools and strategies used for such assessment.

This case study is part of a larger European research project promoted by Cedefop; in Italy it focused on six selected vocational IVET and CVET programmes and apprenticeship schemes. It used a wide range of instruments to ensure triangulation and multiple perspectives: analysed policy documents and undertook online interviews with experts and policy makers. At VET providers' premises it deployed: analysis of school documents; observations of learning environments; interviews and focus groups with (in schools) teachers, directors and vice directors, learners and alumni (in companies) instructors, company tutors and employers, apprentices and alumni.

Assessment tasks were rarely embedded within fully fledged assessment programmes involving both formative and summative tasks, and assessment rubric for grading. Most of the time, entrepreneurship programmes lacked self-assessment, peer assessment and structured feedback and did not involve learners in the assessment process. Some instructors coached the students, but undertook no clear formative assessment. These findings suggest institutions have a testing culture with regard to assessment, at the level of both policy and practice. In most cases, entrepreneurship competence was not directly assessed, and learning outcomes were only loosely related to entrepreneurship.

One limitation concerned the selection of the VET providers: these were chosen not on a casual basis, but because they ran programmes that were relevant to the development of entrepreneurship competence.

At the policy level, there is a need for new guidelines on competence development and assessment in VET, guidelines that are more aligned with educational research on competence development. To ensure the development of entrepreneurship competence, educators need in-service training and a community of practice.

So far, the literature has concentrated on entrepreneurship education at the tertiary level. Little is known about how VET instructors assess entrepreneurship competence. This study updates the picture of policy and practice in Italy, illustrating how entrepreneurship competence is developed in selected IVET and CVET programmes and apprenticeships.

This study aims to achieve superior localization and mapping performance in point cloud degradation scenarios through the effective removal of dynamic obstacles. With the continuous development of various technologies for autonomous vehicles, the LIDAR-based Simultaneous localization and mapping (SLAM) system is becoming increasingly important. However, in SLAM systems, effectively addressing the challenges of point cloud degradation scenarios is essential for accurate localization and mapping, with dynamic obstacle removal being a key component.

This paper proposes a method that combines adaptive feature extraction and loop closure detection algorithms to address this challenge. In the SLAM system, the ground point cloud and non-ground point cloud are separated to reduce the impact of noise. And based on the cylindrical projection image of the point cloud, the intensity features are adaptively extracted, the degradation direction is determined by the degradation factor and the intensity features are matched with the map to correct the degraded pose. Moreover, through the difference in raster distribution of the point clouds before and after two frames in the loop process, the dynamic point clouds are identified and removed, and the map is updated.

Experimental results show that the method has good performance. The absolute displacement accuracy of the laser odometer is improved by 27.1%, the relative displacement accuracy is improved by 33.5% and the relative angle accuracy is improved by 23.8% after using the adaptive intensity feature extraction method. The position error is reduced by 30% after removing the dynamic target.

Compared with LiDAR odometry and mapping algorithm, the method has greater robustness and accuracy in mapping and localization.

The number of young people using e-cigarettes (commonly referred to as vaping) has grown at an alarming rate, creating the need for urgent action. This paper demonstrates rapid step-by-step iterative application of the Co-create, Build and Engage (CBE) framework to showcase how marketing was applied in response to emerging trends that have negative health and environmental consequences. This paper aims to demonstrate how CBE is applied iteratively, ensuring student feedback leads module development.

In Study 1, a pure seven-step co-design implementation, 19 high school students were invited to co-design a vaping prevention approach that would work for them and other people like them. During the sensitisation phase of co-design, students completed one Blurred Minds Vaping module. Feedback grids were provided, with students identifying likes, dislikes and ideas. This likeability data was used, together with input from technical experts and pedagogical best practice, in a 12-week research and development project that aimed to develop a new online learning module focused on vaping and their environmental impacts for the Blurred Minds Academy. The new module was tested with 20 high school students. Feedback grids were provided once again, allowing a comparison of results.

Examination of feedback grid data demonstrates that the newly developed Vaping and the Environment module was improved. Considerations taken on board in the new module design (e.g. increased variability within the module) overcame criticisms expressed previously (e.g. it was boring and too long). Other criticisms remained evident, albeit at a much lower proportion suggesting the new Vaping and the Environment module, and future Blurred Minds module development, would benefit from iterative CBE application.

Conduit et al. (2022) note that marketing academia has been criticised for having an increasingly less relevant managerial agenda. This paper outlines a rapid step-by-step application of marketing in response to one of society’s most pressing health challenges – vaping. The iterative application of CBE is outlined, demonstrating that the student experience can be enhanced when marketing’s continual improvement mindset is used. This is the first vaping prevention programme that has included substantive information around the negative impacts of vaping on the environment.

This paper aims to explore the process of implementing solar photovoltaic (PV) systems in construction to contribute to the understanding of systemic innovation in construction.

The exploratory research presented is based on qualitative data collected in workshops and interviews with 76 construction- and solar-industry actors experienced in solar PV projects. Actor-specific barriers were identified and analysed using an abductive approach.

In light of established definitions of systemic innovation, the process of implementing solar PV systems in construction involves challenges regarding technical and material issues, competencies, and informal and formal institutions. The specificities of this case highlight the necessity of paying attention to details in the process and to develop knowledge of systemic innovation in construction since the industry’s involvement in addressing societal challenges related to the energy transition will require implementing such innovations much more in the future.

New knowledge of solar PV systems as an innovation in professional construction is collected, enabling the adaptation of management strategies for its implementation. This knowledge can also be applied generally to other challenges encountered in highly systemic innovation implementation. Solar industry actors can gain an understanding of solar-specific challenges for the construction industry, challenges for which they must adapt their activities.

The exploration of actor-specific experiences of solar PV projects has resulted in a novel understanding of this specific innovation and its implementation. The findings illustrate a case of a high level of systemic innovation and the need to use a finer-grained scale for classification when studying innovation in construction.

The purpose of this study is to design a closed hydrostatic guideway has the ability to resist large-side load, pitch moments and yaw moments, has good stiffness and damping characteristics, and provides certain beneficial guidance for the design of large-span closed hydrostatic guideway on the basis of providing a large vertical load bearing capacity.

The Reynolds’ equation and flow continuity equation are solved simultaneously by the finite difference method, and the perturbation method and the finite disturbance method is used for calculating the dynamic characteristics. The static and dynamic characteristics, including recess pressure, flow of lubricating oil, carrying capacity, pitch moment, yaw moment, dynamic stiffness and damping, are comprehensively analyzed.

The designed closed hydrostatic guideway has the ability to resist large lateral load, pitch moment and yaw moment and has good stiffness and damping characteristics, on the basis of being able to provide large vertical carrying capacity, which can meet the application requirements of heavy two-plate injection molding machine (TPIMM).

This paper researches static and dynamic characteristics of a large-span six-slider closed hydrostatic guideway used in heavy TPIMM, emphatically considering pitch moment and yaw moment. Some useful guidance is given for the design of large-span closed hydrostatic guideway.

Aero-engine exhaust plume length can be more than the aircraft length, making it easier to detect and track by infrared seeker. Aim of this study is to analyze the effect of free stream Mach number (M_∞) on length of potential core of plume. Also, change in infrared (IR) signature of plume and aircraft surface with variation in elevation angle (θ) is examined.

Convergent divergent (CD) nozzle is located outside the rear fuselage of the aircraft. A two dimensional axisymmetric computational fluid dynamics (CFD) study was carried out to study effect of M_∞ on potential core. The CFD data with aircraft and plume was then used for IR signature analysis. The sensor position is changed with respect to aircraft from directly bottom towards frontal section of aircraft. The IR signature is studied in mid wave IR (MWIR) and long wave IR (LWIR) band.

The potential plume core length and width increases as M_∞ increases. At higher altitudes, the potential core length increases for a fixed M_∞. The plume emits radiation in the MWIR band, whereas the aerodynamically heated aircraft surface emits IR in the LWIR band. The IR signature in the MWIR band continuously decreases as the sensor position changes from directly bottom towards frontal. In the LWIR band the IR signature initially decreases as the sensor moves from the directly bottom to the frontal, as the sensor begins to see the wing leading edges and nose cone, the IR signature in the LWIR band slightly increases.

The novelty of this study comes from the data reported on the effect of free stream Mach number on the potential plume core and variation of the overall IR signature of aircraft with change in elevation angle from directly below towards frontal section of aircraft.

Distribution network design involves a set of strategic decisions in supply chains because of their long-term impacts on the total logistics cost and environment. To incorporate a trade-off between financial and environmental aspects of these decisions, this paper aims to determine an optimal location, among candidate locations, of a new logistics center, its capacity, as well as optimal network flows for an existing distribution network, while concurrently minimizing the total logistics cost and gas emission. In addition, uncertainty in transportation and warehousing costs are considered.

The problem is formulated as a fuzzy multiobjective mathematical model. The effectiveness of this model is demonstrated using an industrial case study. The problem instance is a four-echelon distribution network with 22 products and a planning horizon of 20 periods. The model is solved by using the min–max and augmented ε-constraint methods with CPLEX as the solver. In addition to illustrating model’s applicability, the effect of choosing a new warehouse in the model is investigated through a scenario analysis.

For the applicability of the model, the results indicate that the augmented ε-constraint approach provides a set of Pareto solutions, which represents the ideal trade-off between the total logistics cost and gas emission. Through a case study problem instance, the augmented ε-constraint approach is recommended for similar network design problems. From a scenario analysis, when the operational cost of the new warehouse is within a specific fraction of the warehousing cost of third-party warehouses, the solution with the new warehouse outperforms that without the new warehouse with respective to financial and environmental objectives.

The proposed model is an effective decision support tool for management, who would like to assess the impact of network planning decisions on the performance of their supply chains with respect to both financial and environmental aspects under uncertainty.

The purpose of this paper is to explore the current practices in security convergence among and between corporate security and cybersecurity processes in commercial enterprises.

This paper is the first phase in a planned multiphase project to better understand current practices in security optimization efforts being implemented by commercial organizations exploring means and methods to operate securely while reducing operating costs. The research questions being examined are: What are the general levels of interest in cybersecurity and corporate security convergence? How well do the perspectives on convergence align between organizations? To what extent are organizations pursuing convergence? and How are organizations achieving the anticipated outcomes from convergence?

In organizations, the evolution to a more optimized security structure, either merged or partnered, was traditionally due to unplanned or unforeseen events; e.g. a spin-off/acquisition, new security leadership or a negative security incident was the initiator. This is in contrast to a proactive management decision or formal plan to change or enhance the security structure for reasons that include reducing costs of operations and/or improving outcomes to reduce operational risks. The dominant exception was in response to regulatory requirements. Preliminary findings suggest that outcomes from converged organizations are not necessarily more optimized in situations that are organizationally merged under a single leader. Optimization may ultimately depend on the strength of relationships and openness to collaboration between management, cybersecurity and corporate security personnel.

This report and the number of respondents to its survey do not support generalizable findings. There are too few in each category to make reliable predictions and in analysis, there was an insufficient quantity of responses in most categories to allow supportable conclusions to be drawn.

Practitioners may find useful contextual clues to their needs for convergence or in response to directives for convergence from this report on what is found in some other organizations.

Improved effectiveness and/or reduced costs for organizational cybersecurity would be a useful social outcome as organizations become more efficient in the face of increasing levels of cyber security threats.

Convergence as a concept has been around for some time now in both the practice and research communities. It was initially promoted formally by ASIS International and ISACA in 2005. Yet there is no universally agreed-upon definition for the term or the practices undertaken to achieve it. In addition, the business drivers and practices undertaken to achieve it are still not fully understood. If convergence or optimization of converged operations offers a superior operational construct compared to other structures, it is incumbent to discover if there are measurable benefits. This research hopes to define the concept of security collaboration optimization more fully. The eventual goal is to develop and promote a tool useful for organizations to measure where they are on such a continuum.

Many buildings fail to meet user expectations, causing a performance gap. Pre-occupancy evaluation (PrOE) is believed to have the potential to close the gap. It enables designers to obtain end-user feedback in the design phase and improve the design for better performance. However, PrOE implementation faces challenges due to still maturing knowledgebase. This study aims to understand the state-of-the-art knowledge of PrOE, thereby identifying future research needs to advance the domain.

A systematic literature review following the Preferred Reporting Items for Systematic Reviews and Meta-Analysis (PRISMA) framework was conducted. A thorough search in five databases and Google Scholar retrieved 90 articles, with 30 selected for systematic review after eliminating duplicates and irrelevant articles. Bibliometric analyses were performed using VOSviewer and Biblioshiny on the article metadata, and thematic analyses were conducted on their contents.

PrOE is a vehicle for engaging building end-users in the design phase to address the credibility gap caused by the discrepancies between the expected and actual performance of buildings. PrOE has gained limited applications in healthcare, residential, office and educational building design for two broad purposes: design management and marketing. Using virtual reality technologies for PrOE has demonstrated significant benefits. Yet, the PrOE domain needs to mature in multiple perspectives to serve its intended purpose effectively.

This study identifies four knowledge gaps for future research to advance the PrOE domain: (1) developing a holistic PrOE framework, integrating comprehensive performance evaluation criteria, useable at different stages of the design phase and multi-criteria decision algorithms, (2) developing a mixed reality tool, embodying the holistic PrOE framework, (3) formulating a PrOE framework for adaptive reuse of buildings and (4) managing uncertainties in user requirements during the lifecycle in PrOE decisions.

In this study, the impact of access to electricity on poverty reduction for Botswana is examined using the annual data from 1990 to 2021. The study was motivated by the need to establish if access to electricity could be a panacea on poverty reduction in Botswana. Given that the United Nations Sustainable Development Goals deadline is fast approaching, and Botswana being one of the signatories, is expected to end poverty in all its forms – Goal 1. Establishing the role that electrification plays in poverty alleviation, helps in refocusing Botswana’s poverty alleviation strategies on factors that have high impact on poverty. The main objective of this study, therefore, is to investigate the relationship between poverty alleviation and access to electricity in Botswana.

The study uses the autoregressive distributed lag (ARDL) approach to investigate the nature of the relations. Two poverty proxies were used in this study namely, household consumption expenditure and life expectancy.

The study found access to electricity to reduce poverty in the long run and in the short run, regardless of the poverty measure used. Thus, access to electricity plays an important role in poverty alleviation and Botswana is recommended to continue with the rural and urban electrification initiatives.

The study explores the impact of access to electricity on poverty reduction in Botswana, a departure from the current studies that examined the same relationship using energy consumption in general. This is on the back of increasing dependence of economic activities on electricity as a major source of energy.