Search results

This paper aims to present an open-architecture kinematic controller, which was developed for articulated robots, facing the demands of various applications and low cost on robot system.

A general approach to develop this controller is described in hardware and software design. The hardware consists of embedded boards and programable multi-axes controller (PMAC), connected with ethernet, and the software is implemented on a robot operating system with MoveIt!. The authors also developed a teach pendant running as a LAN node to provide a human–machine interface (HMI).

The proposed approach was applied to several real articulated robot systems and was proved to be effective and portable. The proposed controller was compared with several similar systems to verify its integrality and flexibility. The openness of this controller was discussed and is summarized at the end of this paper.

The proposed approach provided an open and low-complex solution for experimental studies in the lab and short-run production in small workshops.

Several contributions are made by the research. The actuation model and communication were implemented to integrate the trajectory planning module and PMAC for setting up the physical interface. Method and program interface based on kinematics was provided to generate various interpolations for trajectory planning. A teach pedant with HMI was developed for controlling and programing the robot.

The paper aims to present a tracked robot comprised of several biochemical sampling instruments and a universal control architecture. In addition, a dynamic motion planning strategy and autonomous modules in sampling tasks are designed and illustrated at length.

Several sampling instruments with position tolerance and sealing property are specifically developed, and a robotic operation system (ROS)-based universal control architecture is established. Then, based on the system, two typical problems in sampling tasks, i.e. arm motion planning in unknown environment and autonomous modules, are discussed, implemented and tested. Inspired by the idea of Gaussian process classification (GPC) and Gaussian process (GP) information entropy, three-dimensional (3D) geometric modeling and arm obstacle avoidance strategy are implemented and proven successfully. Moreover, autonomous modules during sampling process are discussed and realized.

Smooth implementations of the two experiments justify the validity and extensibility of the robot control scheme. Furthermore, the former experiment proves the efficiency of arm obstacle avoidance strategy, while the later one demonstrates the time reduction and accuracy improvement in sampling tasks as the autonomous actions.

The proposed control architecture can be applied to more mobile and industrial robots for its feasible and extensible scheme, and the utility function in arm path planning strategy can also be utilized for other information-driven exploration tasks.

Several specific biochemical sampling instruments are presented in detail, while ROS and Moveit! are integrated into the system scheme, making the robot extensible, achievable and real-time. Based on the control scheme, an information-driven path planning algorithm and automation in sampling tasks are conceived and implemented.

Aiming at the problems of weak generalization of robot imitation learning methods and higher accuracy requirements of low-level detectors, this study aims to propose an imitation learning method based on structural grammar.

The paper proposes a hybrid training model based on artificial immune algorithm and the Baum–Welch algorithm to extract the action information of the demonstration activity to form the {action-object} sequence and extract the symbol description of the scene to form the symbol primitives sequence. Then, probabilistic context-free grammar is used to characterize and manipulate these sequences to form a grammar space. Minimum description length criteria are used to evaluate the quality of the grammar in the grammar space, and the improved beam search algorithm is used to find the optimal grammar.

It is found that the obtained general structure can parse the symbol primitive sequence containing noise and obtain the correct sequence, thereby guiding the robot to perform more complex and higher-order demonstration tasks.

Using this strategy, the robot completes the fourth-order Hanoi tower task has been verified.

An imitation learning method for robots based on structural grammar is first proposed. The experimental results show that the method has strong generalization ability and good anti-interference performance.

With the rapid development of the 3C industry, the problem of automated operation of 3C wire is becoming increasingly prominent. However, the 3C wire has high flexibility, and its deformation is difficult to model and control. How to realize the automation operation of flexible wire in 3C products is still an important issue that restricts the development of the 3C industry. Therefore, this paper designs a system that aims to improve the automation level of the 3C industry.

This paper designed a visual servo control system. Based on the perception of the flexible wire, a Jacobi matrix is used to relate the deformation of the wire to the action of the robot end; by building and optimizing the Jacobi matrix, the robot can control the flexible wire.

By using the visual servo control system, the shape and deformation of the flexible wire are perceived, and based on this, the robot can control the deformation of the flexible wire well. The experimental environment was built to evaluate the accuracy and stability of the system for controlling the deformation of the flexible wire.

An image-based visual servo system is proposed to operate the flexible wire, including the vision system, visual controller and joint velocity controller. It is a scheme suitable for flexible wire operation, which has helped to automate flexible wire-related industries. Its core is to correlate the motion of the robot end with the deformation of the flexible wire through the Jacobian matrix.

This paper aims to describe an information model, the Canonical Robot Command Language (CRCL), which provides a high-level description of robot tasks and associated control and status information.

A common representation of tasks was used that is understood by all of the resources required for the job: robots, tooling, sensors and people.

Using CRCL, a manufacturer can quickly develop robotic applications that meet customer demands for short turnaround, enable portability across a range of vendor equipment and maintain investments in application development through reuse.

Industrial robots can perform motion with sub-millimeter repeatability when programmed using the teach-and-playback method. While effective, this method requires significant up-front time, tying up the robot and a person during the teaching phase.

In the vast majority of the individual robot installations, the robot arm is just one piece of a complex puzzle of components, such as grippers, jigs or external axis, that together compose an industrial robotic cell. The success of such installations is very dependent not only on the selection of such components but also on the layout and design of the final robotic cell, which are the main tasks of the system integrators. Consequently, successful robot installations are often empirical tasks owing to the high number of experimental combinations that could lead to exhaustive and time-consuming testing approaches.

A newly developed optimized technique to deal with automatic planning and design of robotic systems is proposed and tested in this paper.

The application of a genetic-based algorithm achieved optimal results in short time frames and improved the design of robotic work cells. Here, the authors show that a multi-layer optimization approach, which can be validated using a robotic tool, is able to help with the design of robotic systems.

The usage of the proposed approach can be valuable to industrial corporations, as it allows for improved workflows, maximization of available robotic operations and improvement of efficiency.

To date, robotic solutions lack flexibility to cope with the demanding industrial environments. The results presented here formalize a new flexible and modular approach, which can provide optimal solutions throughout the different stages of design and execution control of any work cell.

The purpose of this paper is to propose and evaluate the method for grasping a defined set of objects in an unstructured environment. To this end, the authors propose the method of integrating convolutional neural network (CNN)-based object detection and the category-free grasping method. The considered scenario is related to mobile manipulating platforms that move freely between workstations and manipulate defined objects. In this application, the robot is not positioned with respect to the table and manipulated objects. The robot detects objects in the environment and uses grasping methods to determine the reference pose of the gripper.

The authors implemented the whole pipeline which includes object detection, grasp planning and motion execution on the real robot. The selected grasping method uses raw depth images to find the configuration of the gripper. The authors compared the proposed approach with a representative grasping method that uses a 3D point cloud as an input to determine the grasp for the robotic arm equipped with a two-fingered gripper. To measure and compare the efficiency of these methods, the authors measured the success rate in various scenarios. Additionally, they evaluated the accuracy of object detection and pose estimation modules.

The performed experiments revealed that the CNN-based object detection and the category-free grasping methods can be integrated to obtain the system which allows grasping defined objects in the unstructured environment. The authors also identified the specific limitations of neural-based and point cloud-based methods. They show how the determined properties influence the performance of the whole system.

The authors identified the limitations of the proposed methods and the improvements are envisioned as part of future research.

The evaluation of the grasping and object detection methods on the mobile manipulating robot may be useful for all researchers working on the autonomy of similar platforms in various applications.

The proposed method increases the autonomy of robots in applications in the small industry which is related to repetitive tasks in a noisy and potentially risky environment. This allows reducing the human workload in these types of environments.

The main contribution of this research is the integration of the state-of-the-art methods for grasping objects with object detection methods and evaluation of the whole system on the industrial robot. Moreover, the properties of each subsystem are identified and measured.