Search results

Taking a 2,000 r/min 10 kW permanent magnet motor as an example, the purpose of this paper is to study the influence of driving modes on the performance of permanent magnet motor at limit conditions, and researched the variation mechanism of motor performance influenced by different driving modes.

A two-dimensional electromagnetic field model of the permanent magnet motor was established, and a rectangular-wave driving circuit was built. By using the finite element method, the electromagnetic field, current, harmonic content and eddy current loss were calculated when the motor operated at rated load and limit load. On the basis of the motor loss calculation, the temperature field of the motor operating at rated condition and limit condition was researched, and the factors that influence motor limit overload capacity were analyzed. By analyzing the motor loss variation at different load conditions, the change mechanism of the motor temperature field was determined further. Combined with the related experiments, the correctness of the above analysis was verified.

Permanent magnet synchronous motor (PMSM) driven by sine wave is better compared with brushless direct current motor (BLDCM) driven by rectangular wave in reducing the magnetic field harmonics, motor losses and optimizing the temperature distribution in the motor. The method driven by sine wave could improve the motor output performance including the motor efficiency and the motor overload capacity. The winding temperature is the most important factor that limits the output capability of PMSM operating for a long time. However, because of the large rotor eddy current losses, the permanent magnet temperature is the most important factor that limits the output capability of BLDCM operating for a long time.

The influence of driving modes on the motor magnetic field, losses and temperature distribution, efficiency and overload capacity was determined, and the influence mechanism was also analyzed. Combined with the analysis of the electromagnetic and temperature fields, the advantages of different driving modes were presented. This study could provide an important basis for the design of permanent magnet motors with different driving modes, and it also provides reference for the application of permanent magnet motor.

This paper presents the influence of driving modes on permanent magnet motors. The limit output capacity of the motor with different driving modes was studied, and the key factors limiting the motor output capability were obtained.

Introduces papers from this area of expertise from the ISEF 1999 Proceedings. States the goal herein is one of identifying devices or systems able to provide prescribed performance. Notes that 18 papers from the Symposium are grouped in the area of automated optimal design. Describes the main challenges that condition computational electromagnetism’s future development. Concludes by itemizing the range of applications from small activators to optimization of induction heating systems in this third chapter.

Discusses the 27 papers in ISEF 1999 Proceedings on the subject of electromagnetisms. States the groups of papers cover such subjects within the discipline as: induction machines; reluctance motors; PM motors; transformers and reactors; and special problems and applications. Debates all of these in great detail and itemizes each with greater in‐depth discussion of the various technical applications and areas. Concludes that the recommendations made should be adhered to.

The brushless direct current motor (BLDCM) is widely accepted and adopted by many industries instead of direct current motors due to high reliability during operation. Brushless direct current (BLDC) has outstanding efficiency as losses that arise out of voltage drops at brushes and friction losses are eliminated. The main factor that affects the performance is temperature introduced in the internal copper core windings. The control of motor speed generates high temperature in BLDC operation. The high temperature is due to presence of ripples in the operational current. The purpose is to present an effective controlling mechanism for speed management and to improve the performance of BLDCM to activate effective management of speed.

The purpose is to present an optimal algorithm based on modified moth-flame optimization algorithm over recurrent neural network (MMFO-RNN) for speed management to improve the performance. The core objective of the presented work is to achieve improvement in performance without affecting the design of the system with no additional circuitry. The management of speed in BLDCM has been achieved through reduction or minimization of ripples encircled with torque of the motor. The implementation ends in two stages, namely, controlling the loop of torque and controlling the loop of speed. The MMFO-RNN starts with error optimization, which arises from both the loops, and most effective values have been achieved through MMFO-RNN protocol.

The parameters are enriched with Multi Resolution Proportional Integral and Derivative (MRPID) controller operation to achieve minimal ripples for the torque of BLDC and manage the speed of the motor. The performance is increased by adopting this technique approximately 12% in comparison with the existing methodology, which is the main contributions of the presented work. The outcomes are analyzed with the existing methodologies through MATLAB Simulink tool, and the comparative analyses suggest that better performance of the proposed system produces over existing techniques, and proto type model is developed and cross verifies the proposed system.

The MMFO-RNN starts with error optimization, which arises from both the loops, and most effective values have been achieved through MMFO-RNN protocol. The parameters are enriched with MRPID controller operation to achieve nil or minimal ripples and to encircle the torque of Brushless Direct Current and manage the speed.

An important characteristic of most induction motors is speed- or slip-torque curve. A simplified Kloss formula is widely used for describing speed-torque characteristic because it is fairly simple. Only two parameters related to break-down torque and break-down slip are regarded as input parameters. Because this simplified formula ignores an unknown parameter that is a ratio between Thevenin’s and rotor resistances, an accurate torque curve characteristic may not be fully obtained over an entire speed range. Moreover, the conventional Kloss formula does not offer a speed-torque curve calculation when motor’s supply voltages and frequencies are deviated from rated values. Hence, the purpose of this paper is to present an extension of Kloss formula, which allows a more precise estimation of speed-torque and speed-current curves of single-cage three-phase induction motors over a wide range of speeds at different motor’s operating voltages, frequencies and rotor-circuit resistances.

The analytical approach is mainly used for determining all key parameters in the Kloss formula using a known set of data such as rated torque, starting torque, break-down torque and rated speed, in which they can be obtained from motor’s manufacturer.

The speed-torque and speed-current curves taken from laboratory measurements are compared with those from the calculations. Good agreements between them are fully observed.

This analytical approach is useful in providing an accurate speed-torque and speed-current curves required for most steady-state analysis.

The purpose of this paper is to present a complete solution for speed sensorless AC drive with voltage source inverter, induction machine, and motor choke. Major problems with adjustable speed drives are underlined and the use of motor choke is justified. An AC drive with motor choke can work only if specific modifications in the control algorithms are done.

The goal of the paper is to present new nonlinear vector control method for induction motor drive. In the control system, the presence of motor choke is taken into account. The choke changes the structure of the predictive controller and state observer. The new concept of integrating the predictive controller with electromagnetic forces observer is presented. The paper presents theoretical description of the system as well the simulation and experimental verification.

The paper shows that the suggested decoupled AC drive control system is operating better than a system without decoupling. The system with motor choke requires modifications in the current controller and observer system. With omitting the motor choke a speed sensorless drive cannot work properly.

The solution is oriented for industrial applications because in numerous industrial dives the motor choke is utilized. However, with motor choke many sophisticated control algorithms cannot work properly. The concept presented in the paper solves such practical problems.

The paper presents a completely new decoupled field‐oriented control system with load angle controller, predictive current controller and state observer for AC drive with motor choke.

The principal intention behind the activity is to regulate the speed, current and commutation of the brushless DC (BLDC) motor. Thereby, the authors can control the torque.

In order to regulate the current and speed of the motor, the Multi-resolution PID (MRPID) controller is proposed. The altered Landsman converter is utilized in this proposed suppression circuit, and the obligation cycle is acclimated to acquire the ideal DC-bus voltage dependent on the speed of the BLDC motor. The adaptive neuro-fuzzy inference system-elephant herding optimization (ANFIS-EHO) calculation mirrors the conduct of the procreant framework in families.

Brushless DC motor's dynamic properties are created, noticed and examined by MATLAB/Simulink model. The performance will be compared with existing genetic algorithms.

The presented approach and performance will be compared with existing genetic algorithms and optimization of different structure of BLDC motor.

The purpose of this paper is to develop a generalized observer and controller for brushless direct current (BLDC) motor to make the system more robust for parameter variations, load torque and speed tracking.

A robust interconnection and damping assignment passivity-based control (IDA-PBC) technique for BLDC motor is introduced in this paper. The IDA-PBC is used to obtain the reference voltages for pulse width modulation (PWM) control. The immersion and invariance (I&I) observer is used to estimate the load torque and speed of the BLDC motor. At the time of starting, the motor rotates in arbitrary direction, and sometimes, because of the cogging action, it may take a huge current. Therefore, a new start-up method is proposed for the BLDC motor, which maintains the alignment of the rotor.

From the simulation and experimental results, it can be seen that the proposed controller and observer satisfactorily work for parameter variations, load torque and speed tracking.

The authenticity of the proposed technique is tested experimentally on two different BLDC motors using low-cost 32-bit STM32F407VG microcontroller. The response of the proposed technique is evaluated by changing motor parameters such as stator resistance, inductance, flux linkage constant and torque constant.

The purpose of this paper is to propose an analytical method for prediction of self‐sustained oscillations that might happen during low‐cost induction motor drive application. This forecast is needed to avoid unwanted oscillations that can be encountered for in fan, compressor and pump drives utilizing open‐loop frequency‐controlled three‐phase induction motor drives.

The paper presents the model of the induction motor drive system that includes inverter switches dead‐time and allows discontinuous current of front‐end rectifier. Stability analysis of proposed model was performed by tracing the eigenvalues of the overall system matrix.

Discontinuous rectifier current at light loads and the dead‐time of the inverter switches are the main sources of undesired low‐frequency self‐sustained speed oscillations in open‐loop controlled induction motor drives. The evaluated risk prediction is a function of drive and motor parameters and load level.

The proposed induction motor drive system model highlights the direct connection between the self‐sustained speed oscillations and the system parameters like inverter dead time, dc capacitor values, motor parameters and motor load level. Good accuracy of instability prediction is verified by dynamic simulation and by extensive experimentation.

The purpose of this paper is to compare different types of electric motor drives for high-efficiency applications: an induction motor (IM) drive, a synchronous reluctance motor drive and a permanent magnet-assisted synchronous reluctance motor drive. An innovative field-oriented analysis technique is applied to estimate the performance of the IM drive. This method of analysis is particularly advantageous in comparing the IM performance to those of synchronous machines.

The comparison among the capabilities of the three electric drives is carried out combining both analytical and finite element methods.

From the analysis, it results that the REL motor exhibits higher torque density than IM, but lower losses since there are no Joule losses in the rotor. On the contrary, the REL motor exhibits a very power factor, which corresponds to a high-volt-ampere ratings of the inverter that supplies the motor itself.

A new analysis technique is adopted to investigate and compare the energy efficiency performance of different machines.