Search results
1 – 10 of over 3000
Abstract
Details
Keywords
Abstract
Details
Keywords
Hongshi Lu, Li Aijun, Wang Changqing and Zabolotnov Michaelovitch Yuriy
This paper aims to present the impact analysis of payload rendezvous with tethered satellite system and the design of an adaptive sliding mode controller which can deal with mass…
Abstract
Purpose
This paper aims to present the impact analysis of payload rendezvous with tethered satellite system and the design of an adaptive sliding mode controller which can deal with mass parameter uncertainty of targeted payload, so that the proposed cislunar transportation scheme with spinning tether system could be extended to a wider and more practical range.
Design/methodology/approach
In this work, dynamical model is first derived based on Langrangian equations to describe the motion of a spinning tether system in an arbitrary Keplerian orbit, which takes the mass of spacecraft, tether and payload into account. Orbital design and optimal open-loop control for the payload tossed by the spinning tether system are then presented. The real payload rendezvous impact around docking point is also analyzed. Based on reference acceleration trajectory given by optimal theories, a sliding mode controller with saturation functions is designed in the close-loop control of payload tossing stage under initial disturbance caused by actual rendezvous error. To alleviate the influence of inaccurate/unknown payload mass parameters, the adaptive law is designed and integrated into sliding mode controller. Finally, the performance of the proposed controller is evaluated using simulations. Simulation results validate that proposed controller is found effective in driving the spinning tether system to carry payload into desired cislunar transfer orbit and in dealing with payload mass parameter uncertainty in a relatively large range.
Findings
The results show that unideal rendezvous manoeuvres have significant impact on in-plane motion of spinning tether system, and the proposed adaptive sliding mode controller with saturation functions not only guarantees the stability but also provides good performance and robustness against the parameter and unstructured uncertainties.
Originality/value
This work addresses the analysis of actual impact on spinning tether system motion when payload is docking with system within tolerated docking window, rather than at the particular ideal docking point, and the robust tracking control of deep-space payload tossing missions with the spinning tether system using the adaptive sliding mode controller dealing with parameter uncertainties. This combination has not been proposed before for tracking control of multivariable spinning tether systems.
Details
Keywords
Yue Qiao, Wang Wei, Yunxiang Li, Shengzui Xu, Lang Wei, Xu Hao and Re Xia
The purpose of this paper is to introduce a motion control method for WFF-AmphiRobot, which can effectively realize the flexible motion of the robot on land, underwater and in the…
Abstract
Purpose
The purpose of this paper is to introduce a motion control method for WFF-AmphiRobot, which can effectively realize the flexible motion of the robot on land, underwater and in the transition zone between land and water.
Design/methodology/approach
Based on the dynamics model, the authors selected the appropriate state variables to construct the state space model of the robot and estimated the feedback state of the robot through the maximum a posteriori probability estimation. The nonlinear predictive model controller of the robot is constructed by local linearization of the model to perform closed-loop control on the overall motion of the robot. For the control problem of the terminal trajectory, using the neural rhythmic movement theory in bionics to construct a robot central pattern generator (CPG) for real-time generation of terminal trajectory.
Findings
In this paper, the motion state of WFF-AmphiRobot is estimated, and a model-based overall motion controller for the robot and an end-effector controller based on neural rhythm control are constructed. The effectiveness of the controller and motion control algorithm is verified by simulation and physical prototype motion experiments on land and underwater, and the robot can ideally complete the desired behavior.
Originality/value
The paper designed a controller for WFF-AmphiRobot. First, when constructing the robot state estimator in this paper, the robot dynamics model is introduced as the a priori estimation model, and the error compensation of the a priori model is performed by the method of maximum a posteriori probability estimation, which improves the accuracy of the state estimator. Second, for the underwater oscillation motion characteristics of the flipper, the Hopf oscillator is used as the basis, and the flipper fluctuation equation is modified and improved by the CPG signal is adapted to the flipper oscillation demand. The controller effectively controls the position error and heading angle error within the desired range during the movement of the WFF-AmphiRobot.
Details
Keywords
Qun Shi, Wangda Ying, Lei Lv and Jiajun Xie
This paper aims to present an intelligent motion attitude control algorithm, which is used to solve the poor precision problems of motion-manipulation control and the problems of…
Abstract
Purpose
This paper aims to present an intelligent motion attitude control algorithm, which is used to solve the poor precision problems of motion-manipulation control and the problems of motion balance of humanoid robots. Aiming at the problems of a few physical training samples and low efficiency, this paper proposes an offline pre-training of the attitude controller using the identification model as a priori knowledge of online training in the real physical environment.
Design/methodology/approach
The deep reinforcement learning (DRL) of continuous motion and continuous state space is applied to motion attitude control of humanoid robots and the robot motion intelligent attitude controller is constructed. Combined with the stability analysis of the training process and control process, the stability constraints of the training process and control process are established and the correctness of the constraints is demonstrated in the experiment.
Findings
Comparing with the proportion integration differentiation (PID) controller, PID + MPC controller and MPC + DOB controller in the humanoid robots environment transition walking experiment, the standard deviation of the tracking error of robots’ upper body pitch attitude trajectory under the control of the intelligent attitude controller is reduced by 60.37 per cent, 44.17 per cent and 26.58 per cent.
Originality/value
Using an intelligent motion attitude control algorithm to deal with the strong coupling nonlinear problem in biped robots walking can simplify the control process. The offline pre-training of the attitude controller using the identification model as a priori knowledge of online training in the real physical environment makes up the problems of a few physical training samples and low efficiency. The result of using the theory described in this paper shows the performance of the motion-manipulation control precision and motion balance of humanoid robots and provides some inspiration for the application of using DRL in biped robots walking attitude control.
Details
Keywords
Tugrul Oktay, Harun Celik and Ilke Turkmen
The purpose of this paper is to examine the success of constrained control on reducing motion blur which occurs as a result of helicopter vibration.
Abstract
Purpose
The purpose of this paper is to examine the success of constrained control on reducing motion blur which occurs as a result of helicopter vibration.
Design/methodology/approach
Constrained controllers are designed to reduce the motion blur on images taken by helicopter. Helicopter vibrations under tight and soft constrained controllers are modeled and added to images to show the performance of controllers on reducing blur.
Findings
The blur caused by vibration can be reduced via constrained control of helicopter.
Research limitations/implications
The motion of camera is modeled and assumed same as the motion of helicopter. In model of exposing image, image noise is neglected, and blur is considered as the only distorting effect on image.
Practical implications
Tighter constrained controllers can be implemented to take higher quality images by helicopters.
Social implications
Recently, aerial vehicles are widely used for aerial photography. Images taken by helicopters mostly suffer from motion blur. Reducing motion blur can provide users to take higher quality images by helicopters.
Originality/value
Helicopter control is performed to reduce motion blur on image for the first time. A control-oriented and physic-based model of helicopter is benefited. Helicopter vibration which causes motion blur is modeled as blur kernel to see the effect of helicopter vibration on taken images. Tight and soft constrained controllers are designed and compared to denote their performance in reducing motion blur. It is proved that images taken by helicopter can be prevented from motion blur by controlling helicopter tightly.
Details
Keywords
Manlu Liu, Rui Lin, Maotao Yang, Anaid V. Nazarova and Jianwen Huo
The characteristics of spherical robots, such as under-drive, non-holonomic constraints and strong coupling, make it difficult to establish its motion control model accurately. To…
Abstract
Purpose
The characteristics of spherical robots, such as under-drive, non-holonomic constraints and strong coupling, make it difficult to establish its motion control model accurately. To improve the anti-interference performance of spherical robots in practical engineering, this paper proposes a spherical robot motion controller based on auto-disturbance rejection control (ADRC) with parameter tuning.
Design/methodology/approach
This paper considers the influences of the spherical shell, internal frame and pendulum on the movement of the spherical robot during the rotation to establish the multi-body dynamics model of the XK-I spherical robot. Due to the serious coupling problem of the dynamic model, the motion control state equation is constructed using linearization and decoupling. The XK-I spherical robot PSO-ADRC motion controller with parameter tuning function is designed by combining the state equation with the particle swarm optimization (PSO) algorithm. Finally, experiments are performed to evaluate the feasibility of PSO-ADRC in an actual case compared to ADRC, PSO-PID and PID.
Findings
By analyzing the required time to reach the expected value, the control stability and the fluctuation range of the standard deviation after reaching the expected value, the superiority of PSO-ADRC to ADRC, PSO-PID and PID is demonstrated in terms of the speed and anti-interference ability.
Practical implications
The proposed method can be applied to the robot control field.
Originality/value
A parameter-tuning method for auto-disturbance-rejection motion control of the spherical robot is proposed. According to the experimental results, the anti-interference ability of the spherical robot moving on uneven ground is improved. Therefore, it provides a foundation for the autonomous environmental monitoring of the spherical robot equipped with sensors.
Details
Keywords
Shuang Hao, Guangming Song, Juzheng Mao, Yue Gu and Aiguo Song
This paper aims to present a fully actuated aerial manipulator (AM) with a robust motion/force hybrid controller for conducting contact-typed inspection tasks in industrial plants.
Abstract
Purpose
This paper aims to present a fully actuated aerial manipulator (AM) with a robust motion/force hybrid controller for conducting contact-typed inspection tasks in industrial plants.
Design/methodology/approach
An AM is designed based on a hexarotor with tilted rotors and a rigidly attached end effector. By tilting the rotors, the position and attitude of the AM can be controlled independently, and the AM can actively exert forces on industrial facilities through the rigidly attached end effector. A motion/force hybrid controller is proposed to perform contact-typed inspection tasks. The contact-typed inspection task is divided into the approach phase and the contact phase. In the approach phase, the AM automatically approaches the contact surface. In the contact phase, a motion/force hybrid controller is used for contact-typed inspection. Finally, a disturbance observer (DOB) is used to estimate external disturbances and used as feedforward compensation.
Findings
The proposed AM can slowly approach the contact surface without significant impact in the contact phase. It can realize constant force control in the direction normal to the contact surface in the contact phase, whereas the motion of the remaining directions can be controlled by the operator. The use of the DOB ensures the robustness of the AM in the presence of external wind disturbances.
Originality/value
A fully actuated AM system with a robust motion/force hybrid controller is proposed. The effectiveness of the proposed AM system for conducting contact-typed industrial inspection tasks is validated by practical experiments.
Details
Keywords
Daisuke Chugo, Kuniaki Kawabata, Hiroyuki Okamoto, Hayato Kaetsu, Hajime Asama, Norihisa Miyake and Kazuhiro Kosuge
The aim is to develop a force assistance system for standing‐up which prevents the decreasing of physical strength of the patient by using their remaining physical strength.
Abstract
Purpose
The aim is to develop a force assistance system for standing‐up which prevents the decreasing of physical strength of the patient by using their remaining physical strength.
Design/methodology/approach
The system realizes the standing up motion using the support bar with two degrees of freedom and the bed system which can move up and down. For using the remaining physical strength, our system uses the motion pattern which is based on the typical standing up motion by nursing specialist as control reference.
Findings
The assistance system realizes the natural standing up motion by nursing specialist and it is effective to assist the aged person to stand up without reducing their muscular strength.
Originality/value
The first idea is distributed system which controls the support bar and the bed system with coordination among them. The second idea is the combination of force and position control.
Details
Keywords
Changzhu Wei, Yi Shen, Xiaoxiao Ma, Jifeng Guo and Naigang Cui
The purpose of this paper is to analyze the frame of a missile formation cooperative control system, and present an optimal keeping controller of a missile formation in the…
Abstract
Purpose
The purpose of this paper is to analyze the frame of a missile formation cooperative control system, and present an optimal keeping controller of a missile formation in the cooperative engagement.
Design/methodology/approach
A missile relative motion model is established directly based on the kinematics relationships in the relative coordinated frame, following that is the detailed process of designing an optimal formation controller, which is analyzed through the small disturbance linearized method and transforming control variables method, respectively, these two methods both have themselves properties. The equations and control variables are intuitive during the linearized analysis, but errors brought by the linearized method are unavoidable, which will reduce the control precision. As for the transforming method, the control accuracy is greatly increased although the control form is a little complex, so in this paper the transforming control variable method is mainly researched to design an optimal formation controller. Considering the states of a leader as input perturbation variables, we design an optimal formation controller based on the linear quadric theory, which has quadric optimal performances of the missile flight states and control quantity. In order to obtain a higher accurate solution, the precise integration algorithm is introduced to solve the Riccati Equation that significantly affects the accuracy of an optimal control problem.
Findings
The relative motion model established directly in the relative coordinate frame has intuitive physical significance, and the optimal controller based on this relative motion model is capable of restraining the invariable or slowly varying perturbation brought by the velocity of a leader and the input perturbations caused by the maneuver of the leader, at the same time this optimal controller can implement formation reconfiguration and keeping to an expected states rapidly, steadily and exactly; the steady errors can be greatly decreased by analyzing the relative motion model through transforming control variables method compared to the small disturbance linearized operation.
Practical implications
The main frame of a missile formation cooperative engagement system can be found in this paper, which shows a clear structure and relations of each part of this complex system. The relations between each subsystem including the specific input and output variables can also be used to guide and restrict how to design each subsystem. The emphasis of this paper is on designing an optimal formation keeping controller which can overcome slowly varying or invariable perturbations and implement quadric optimal keeping control rapidly, stably and accurately.
Originality/value
This paper provides a new method to analyze the missile relative motion model. The proposed proportional and integral (PI) optimal controller based on this model, and utilizing the Precise Integration Algorithm to solve this optimal controller are also new thoughts for formation control problems.
Details