Search results
1 – 10 of over 2000Kannan B.T. and Panchapakesan N.R.
This study aims to investigate the effects of nozzle momentum flux distribution on the flow field characteristics.
Abstract
Purpose
This study aims to investigate the effects of nozzle momentum flux distribution on the flow field characteristics.
Design/methodology/approach
The nozzle configuration consists of a central nozzle surrounded by four nozzles. All nozzles have the same diameter and constant separation between nozzles. OpenFOAM® is used for simulating the jet flow. Reynolds-averaged Navier-Stokes (RANS) equations are solved iteratively with a first-order closure for turbulence. Pitot-static tube with differential pressure transducer is used for mean velocity measurements. The comparison of computed results with experimental data shows similar trend and acceptable validation.
Findings
According to the results, the momentum flux distribution significantly alters the near field of multiple turbulent round jets. Highly non-linear decay region in the near field is found for the cases having higher momentum in the outer jets. As a result of merging, increased positive pressure is found in the mixing region. Higher secondary flows and wider mixing region are reported as a result of momentum transfer from axial to lateral directions by Reynolds stresses.
Research limitations/implications
The present study is limited to isothermal flow of air jet in air medium.
Social implications
Optimum momentum flux distribution in multijet injector of a combustor can reap better mixing leading to better efficiency and lesser environmental pollution.
Originality/value
As summary, the contributions of this paper in the field of turbulent jets are following: simulations for various momentum distribution cases have been performed. In all the cases, the flow at the nozzle exit is subsonic along with constant velocity profile. To simulate proper flow field, a large cylinder-type domain with structured grid is used with refinements toward the nozzle exit and jet axis. The results show that the non-linearity increases with increase in momentum of outer jets. Longer merging zones are reported for cases with higher momentum in outer nozzles using area-averaged turbulent kinetic energy. Similarly, wider mixing regions are reported using secondary flow parameter and visualizations.
Details
Keywords
Shooka Karimpour Ghannadi and Vincent H. Chu
The purpose of this paper is to evaluate the performance of a numerical method for the solution to shallow-water equations on a staggered grid, in simulations for shear…
Abstract
Purpose
The purpose of this paper is to evaluate the performance of a numerical method for the solution to shallow-water equations on a staggered grid, in simulations for shear instabilities at two convective Froude numbers.
Design/methodology/approach
The simulations start from a small perturbation to a base flow with a hyperbolic-tangent velocity profile. The subsequent development of the shear instabilities is studied from the simulations using a number of flux-limiting schemes, including the second-order MINMOD, the third-order ULTRA-QUICK and the fifth-order WENO schemes for the spatial interpolation of the nonlinear fluxes. The fourth-order Runge-Kutta method advances the simulation in time.
Findings
The simulations determine two parameters: the fractional growth rate of the linear instabilities; and the vorticity thickness of the first nonlinear peak. Grid refinement using 32, 64, 128, 256 and 512 nodes over one wave length determines the exact values by extrapolation and the computational error for the parameters. It also determines the overall order of convergence for each of the flux-limiting schemes used in the numerical simulations.
Originality/value
The four-digit accuracy of the numerical simulations presented in this paper are comparable to analytical solutions. The development of this reliable numerical simulation method has paved the way for further study of the instabilities in shear flows that radiate waves.
Details
Keywords
Farhang Behrangi, Mohammad Ali Banihashemi, Masoud Montazeri Namin and Asghar Bohluly
This paper aims to present a novel numerical technique for solving the incompressible multiphase mixture model.
Abstract
Purpose
This paper aims to present a novel numerical technique for solving the incompressible multiphase mixture model.
Design/methodology/approach
The multiphase mixture model contains a set of momentum and continuity equations for the mixture phase, a second phase continuity equation and the algebraic equation for the relative velocity. For solving continuity equation for the second phase and advection term of momentum, an improved approach fine grid advection-multiphase mixture flow (FGA-MMF) is developed. In the FGA-MMF method, the continuity equation for the second phase is solved with higher-order schemes in a two times finer grid. To solve the advection term of the momentum equation, the advection fluxes of the volume fraction in the continuity equation for the second phase are used.
Findings
This approach has been used in various tests to simulate unsteady flow problems. Comparison between numerical results and experimental data demonstrates a satisfactory performance. Numerical examples show that this approach increases the accuracy and stability of the solution and decreases non-monotonic results.
Research limitations/implications
The solver for the multi-phase mixture model can only be adopted to solve the incompressible fluid flow.
Originality/value
The paper developed an innovative solution (FGA-MMF) to find multi-phase flow field value in the multi-phase mixture model. Advantages of the FGA-MMF technique are the ability to accurately determine the phases interpenetrating, decreasing the numerical diffusion of the interface and preventing instability and non-monotonicity in solution of large density variation problems.
Details
Keywords
To investigate the film cooling effectiveness in a flat plate with a single row of rectangular injection holes.
Abstract
Purpose
To investigate the film cooling effectiveness in a flat plate with a single row of rectangular injection holes.
Design/methodology/approach
Three injection holes in model are in a single row. The holes are rectangular cross section and they are 9 × 6.5 mm. The injection holes are inclined at 30° along the mainstream direction. The blowing ratios are from 0.5 to 2.0. The experiments and their computational models are established to investigate its effects at the 330 and 335 and 340 K injection temperatures and the different blowing ratios.
Findings
Results show that the blowing ratio and injection temperature and momentum flux ratio affect the film cooling effectiveness and to provide a good film cooling performance in both mainstream and lateral direction a suitable blowing ratio should be selected. In this study, the highest effectiveness is determined at a blowing ratio of 0.5. Further increasing this ratio results in reverse effect on the film cooling effectiveness.
Originality/value
It is the fist time the film cooling effectiveness is compared at the rectangular injection holes as experimental and numerical.
Details
Keywords
Paweł Ziółkowski and Janusz Badur
The purpose of this paper is the theoretical presentation of tensorial formulation with surface mobility forces and numerical verification of Reynolds thermal transpiration law in…
Abstract
Purpose
The purpose of this paper is the theoretical presentation of tensorial formulation with surface mobility forces and numerical verification of Reynolds thermal transpiration law in a contemporary experiment with nanoflow.
Design/methodology/approach
The velocity profiles in a single microchannel are calculated by solving the momentum equations and using thermal transpiration force as the boundary conditions. The mass flow rate and pressure of unstationary thermal transpiration modeling of the benchmark experiment has been achieved by the implementation of the thermal transpiration mobility force closure for the thermal momentum accommodation coefficient.
Findings
An original and easy-to-implement method has been developed to numerically prove that at the final equilibrium, i.e. zero-flow state, there is a connection between the Poiseuille flow in the center of channel and counter thermal transpiration flow on the surface. The numerical implementation of the Reynolds model of thermal transpiration has been performed, and its usefulness for the description of the benchmark experiment has been verified.
Research limitations/implications
The simplified procedure requires the measurement or assumption of the helium-glass slip length.
Practical implications
The procedure can be very useful in the design of micro-electro-mechanical systems and nano-electro-mechanical systems, especially for accommodation pumping.
Originality/value
The paper discussed possible constitutive equations in the transpiration shell-like layer. The new approach can be helpful for modeling phenomena occurring at a fluid–solid phase interface at the micro- and nanoscales.
Details
Keywords
AN analysis of the mechanism of jet drag is given by Stratford, it being suggested that jet drag is zero if the density velocity products of the free‐stream and jet are equal…
Abstract
AN analysis of the mechanism of jet drag is given by Stratford, it being suggested that jet drag is zero if the density velocity products of the free‐stream and jet are equal, among other conditions. Under certain conditions Stratford concludes that ‘negative’ jet drag (i.e. thrust augmentation) is possible.
L. Allançon, B. Porterie, R. Saurel and J.C. Loraud
A numerical analysis is given for the prediction of unsteady,two‐dimensional fluid flow induced by a heat and mass source in aninitially closed cavity which is vented when the…
Abstract
A numerical analysis is given for the prediction of unsteady, two‐dimensional fluid flow induced by a heat and mass source in an initially closed cavity which is vented when the internal overpressure reaches a certain level. A modified ICE technique is used for solving the Navier–Stokes equations governing a compressible flow at a low Mach number and high temperature. Particular attention is focused on the treatment of the boundary conditions on the vent surface. This has been treated by an original procedure using the resolution of a Riemann problem. The configuration investigated may be viewed as a test problem which allows simulation of the ventilation and cooling of such cavities. The injection of hot gases is found to play a key role on the temperature field in the enclosure, whereas the vent seems to produce a distortion of the dynamic flow‐field only. When the injection of hot gases is stopped, the enclosure heat transfer is strongly influenced by the vent. A comparison with the results obtained when the radiative heat transfer between the walls of the enclosure is considered, indicate that radiation dominates the heat transfer in the enclosure and alters the flow patterns significantly.
Details
Keywords
The purpose of this paper is to clarify the status of Maxwell's tensor with respect to the virtual power principle (VPP).
Abstract
Purpose
The purpose of this paper is to clarify the status of Maxwell's tensor with respect to the virtual power principle (VPP).
Design/methodology/approach
Mathematical analysis is employed.
Findings
The VPP, logically stronger, is more fundamental. Maxwell's tensor derives from it, under further restrictive assumptions, and hence, its range of applicability is limited. In particular, it fails to deal with some aspects of magnetostriction.
Originality/value
The paper shows that when magnetic constitutive laws depend, locally, on strain, the body force is not, as a rule, the divergence of the Maxwell tensor. People who intend to compute forces this way should be wary of that.
Details
Keywords
Yadav Krishna Kumar Rajnath, Akshoy Ranjan Paul and Anuj Jain
The purpose of air-intake duct used in combat aircrafts is to decelerate the inlet flow and concurrently raise the static pressure recovery at the compressor inlet. Because of…
Abstract
Purpose
The purpose of air-intake duct used in combat aircrafts is to decelerate the inlet flow and concurrently raise the static pressure recovery at the compressor inlet. Because of side-slip movement during sharp maneuvers of the aircrafts, the airflows ingested into twin air-intake ducts are not same and symmetric at its two inlets but are asymmetric in nature. The asymmetric inlet flow conditions at the twin air-intakes thus caused instabilities and deteriorated aerodynamic performance of aircraft components such as compressors and other downstream components. This study aims to investigate the flow control in a twin air-intake with asymmetric inflows.
Design/methodology/approach
The continuity and momentum equations are solved with second-order upwind scheme for computing finite-volume method-based unsteady computational fluid dynamics simulation.
Findings
Performance parameters are deteriorated with the increase of inflow asymmetry in the twin air-intake duct. Slotted synthetic jets are used to manage flow separation, thereby increasing aerodynamic performance of the air-intake. A variety of vortical structures are generated from the rectangular slots, convected downstream of the twin air-intake. The use of slotted synthetic jets increases static pressure recovery by 64 per cent whereas reducing total pressure loss coefficient by 63 per cent, distortion coefficient by 58 per cent and swirl coefficient by 55 per cent which is an indicative of better aerodynamic performance of twin air-intake.
Originality/value
The study stresses the need of robust flow control technique to improve the performance of combat air-intake system under extreme maneuvering conditions. The results can be useful in designing air-intake satisfying the stealth features for modern combat aircrafts.
Details
Keywords
Amin Jafarimoghaddam and Ioan Pop
The purpose of this study is to present a simple analytic solution to wall jet flow of nanofluids. The concept of exponentially decaying wall jet flows proposed by Glauert (1956)…
Abstract
Purpose
The purpose of this study is to present a simple analytic solution to wall jet flow of nanofluids. The concept of exponentially decaying wall jet flows proposed by Glauert (1956) is considered.
Design/methodology/approach
A proper similarity variables are used to transform the system of partial differential equations into a system of ordinary (similarity) differential equations. This system is then solved analytically.
Findings
Dual solutions are found and a stability analysis has been done. These solutions show that the first solution is physically realizable, whereas the second solution is not practicable.
Originality/value
The present results are original and new for the study of fluid flow and heat transfer over a static permeable wall, as they successfully extend the problem considered by Glauert (1956) to the case of nanofluids.
Details