Search results

1 – 9 of 9
Article
Publication date: 26 June 2019

Mehdi Dadkhah, Mehran Masdari, Mohammad Ali Vaziri and Mojtaba Tahani

In this paper, experimental and numerical results of a lambda wing have been compared. The purpose of this paper is to study the behaviour of lambda wings using a CFD tool and to…

Abstract

Purpose

In this paper, experimental and numerical results of a lambda wing have been compared. The purpose of this paper is to study the behaviour of lambda wings using a CFD tool and to consider different numerical models to obtain the most accurate results. As far as the consideration of numerical methods is concerned, the main focus is on the evaluation of computational methods for an accurate prediction of contingent leading edge vortices’ path and the flow separation occurring because of the burst of these vortices on the wing.

Design/methodology/approach

Experimental tests are performed in a closed-circuit wind tunnel at the Reynolds number of 6 × 105 and angles of attack (AOA) ranging from 0 to 10 degrees. Investigated turbulence models in this study are Reynolds Averaged Navior–Stokes (RANS) models in a steady state. To compare the accuracy of the turbulence models with respect to experimental results, sensitivity study of these models has been plotted in bar charts.

Findings

The results illustrate that the leading edge vortex on this lambda wing is unstable and disappears soon. The effect of this disappearance is obvious by an increase in local drag coefficient in the junction of inner and outer wings. Streamlines on the upper surface of the wing show that at AOA higher than 8 degrees, the absence of an intense leading edge vortex leads to a local flow separation on the outer wing and a reverse in the flow.

Research limitations/implications

Results obtained from the behaviour study of transition (TSS) turbulence model are more compatible with experimental findings. This model predicts the drag coefficient of the wing with the highest accuracy. Of all considered turbulence models, the Spalart model was not able to accurately predict the non-linearity of drag and pitching moment coefficients. Except for the TSS turbulence model, all other models are unable to predict the aerodynamic coefficients corresponding to AOA higher than 10 degrees.

Practical implications

The presented results in this paper include lift, drag and pitching moment coefficients in various AOA and also the distribution of aerodynamic coefficients along the span.

Originality/value

The presented results include lift, drag and pitching moment coefficients in various AOA and also aerodynamic coefficients distribution along the span.

Details

Aircraft Engineering and Aerospace Technology, vol. 91 no. 8
Type: Research Article
ISSN: 1748-8842

Keywords

Article
Publication date: 19 September 2016

Jalil Vaziri and Mohammad Ali Beheshtinia

In today’s highly competitive business environment, the main approach of all businesses is to optimally provide customers’ requirements and gain their satisfaction and trust. The…

1159

Abstract

Purpose

In today’s highly competitive business environment, the main approach of all businesses is to optimally provide customers’ requirements and gain their satisfaction and trust. The process of value creation for customers consists of value chain activities which are concentrated on providing maximum level of customers’ needs. The purpose of this paper is to propose a holistic model by which the quality, the transferred value to customers and the firm’s competitive advantage would be improved simultaneously under budget constraint.

Design/methodology/approach

This study uses a combination of several quality management (QM) tools including SERVQUAL, Kano’s model, quality function deployment and knapsack problem. Moreover, the triangular fuzzy logic is used throughout the model to address data uncertainty and increase the model flexibility. The proposed model includes five steps which are implemented in the case study of life-insurance services.

Findings

The lack of coordination and cooperation between the people working in the inherently related sections leads to incorrect decisions and also the failure in implementation of adopted decisions. Hence, the interface between quality and strategic management should be well considered in organizations. The model generates an integrated vision to the process of decision making in this interface. The framework has several significant outcomes which would be used by both researchers and practitioners.

Research limitations/implications

The study shows that the individual elements of decision-making process in the interface between quality and strategic management are related to each other, recommending the need to coordinated and consistent effort between different parts of a firm. The results are limited by the sample size and geography of the survey.

Originality/value

This paper is among the few in the literature that have presented a holistic and step-by-step approach to the decisions on the intersection between two areas of quality and strategic management, recommending the managers to not have insular look to the issues and try to make a sufficient and efficient relationship between the different sections. This study is an important step in reflecting these relations and the need to create an integrated decision model.

Details

Management Decision, vol. 54 no. 8
Type: Research Article
ISSN: 0025-1747

Keywords

Article
Publication date: 31 October 2018

Moein Farokhnia and Mohammad Ali Beheshtinia

Nowadays, many organizations use quality function deployment (QFD) in order to recognize their customers’ wants and arrange a set of corrective activities in order to satisfy…

Abstract

Purpose

Nowadays, many organizations use quality function deployment (QFD) in order to recognize their customers’ wants and arrange a set of corrective activities in order to satisfy these wants. In a competitive environment, two or more organizations cooperate in order to meet their customers’ wants. The purpose of this paper is to introduce a new hybrid approach of QFD employing SERVQUAL method, named three-dimensional house of quality (3DHOQ) to help the cooperation between two organizations with common customers by determining some common corrective activities that would satisfy their customers’ wants.

Design/methodology/approach

In order to better explain the proposed model, it is implemented in Birjand International Airport and Iran Air airline. At first, the customers’ want in the airport and airline sections are identified and the SERVQUAL method is used to determine the final weight of these wants. Afterwards, the corrective activities for satisfying the customers’ wants are determined using the three-dimensional QDF; and then are given weights using the multi-dimensional relation matrix.

Findings

Results of this study show the customers’ wants in two sections of airport and airline, the importance of each customer want, the gap between customers’ perception and expectation of each want, the collective corrective activities required to satisfy the customers’ wants and the weight of these corrective activities.

Research limitations/implications

This paper helps the airline and airport sections have an analyzed list of their customers’ wants and a set of shared and unshared corrective activities to meet these wants.

Originality/value

This paper presents a simultaneous QFD analysis in the airport and airline sections. Moreover, a new hybrid approach employing SERVQUAL method, named 3DHOQ is introduced to determine the corrective activities of both organizations and their weights.

Details

Management Decision, vol. 57 no. 7
Type: Research Article
ISSN: 0025-1747

Keywords

Article
Publication date: 4 September 2017

Mohammad Ali Beheshtinia and Sedighe Omidi

This paper aims to propose a hybrid multiple criteria decision-making (MCDM) technique for performance evaluation of banks in which the banks are assessed and ranked according to…

1092

Abstract

Purpose

This paper aims to propose a hybrid multiple criteria decision-making (MCDM) technique for performance evaluation of banks in which the banks are assessed and ranked according to the criteria of the balanced scorecard (BSC) methodology and corporate social responsibility (CSR) views.

Design/methodology/approach

To clarify the performance of the proposed model, the MCDM technique was implemented in four banks in Iran as a pilot. First, proper criteria for banking industry are identified considering BSC and CSR. Consequently, analytic hierarchy process (AHP) and modified digital logic (MDL) techniques are used to determine the weights of criteria. The banks are ranked by fuzzy TOPSIS (FTOPSIS) and fuzzy VIKOR (FVIKOR). Using a combination of these techniques, four methods, namely, AHP-FTOPSIS, AHP-FVIKOR, MDL-FTOPSIS and MDL-FVIKOR, are obtained, each of which provides a different set of rankings for banks. Eventually, the obtained ranks are integrated using the Copeland method.

Findings

The results showed that the return on investment, debt ratio and lower energy consumption criteria are the most important, and enhancement of brand value, increasing customer loyalty and environmental care criteria have the lowest percentage of importance. Also, the final bank ranking is determined by the proposed method.

Originality/value

This paper identifies 6 criteria and 25 sub-criteria for evaluating the banks considering BSC and CSR viewpoints including some new sub-criteria that has not been considered before. Moreover, these hybrid approaches and especially MDL techniques have not been used by previous researchers.

Details

Kybernetes, vol. 46 no. 8
Type: Research Article
ISSN: 0368-492X

Keywords

Article
Publication date: 25 November 2019

Mahdad Pourmadadkar, Mohammad Ali Beheshtinia and Kamran Ghods

The purpose of this paper is to introduce an integrated approach using failure modes and effects analysis (FMEA), multiple-criteria decision making (MCDM), mathematical modeling…

Abstract

Purpose

The purpose of this paper is to introduce an integrated approach using failure modes and effects analysis (FMEA), multiple-criteria decision making (MCDM), mathematical modeling and quality function deployment (QFD) techniques, for risk assessment and service quality enhancement in coronary artery bypass grafting (CABG) as a treatment for cardiovascular diseases (CVDs).

Design/methodology/approach

First, the disruptions in the CABG process are identified and prioritized following FMEA instructions, using two MCDM techniques, called analytic hierarchy process (AHP) and TOPSIS. Consequently, several corrective activities are identified and weighted on the basis of QFD. Finally, a mathematical model is established to determine the most cost-effective activities for implementation. The approach is developed in a fuzzy environment to reflect the uncertainty and ambiguity of human reasoning.

Findings

Regarding the CABG process disruption, a total of 30 failure modes in four main categories were identified and prioritized. Moreover, eight corrective activities were devised and ranked according to their impact on the failure modes. Finally, considering a limited amount of budget, a sensitivity analysis on the mathematical model’s objective function indicated that using 30 percent of the total budget, required to implement all corrective activities, was enough to cover more than 70 percent of the effects of corrective activities on the failure modes.

Originality/value

This paper contributes to the quality risk assessment knowledge by introducing an integrated approach to evaluate and improve healthcare services quality. Also, the case study conducted on the CABG process has not been done by other related studies in the literature.

Details

International Journal of Quality & Reliability Management, vol. 37 no. 9/10
Type: Research Article
ISSN: 0265-671X

Keywords

Article
Publication date: 26 September 2018

Aboozar Ramezani, Seyed Javad Ghazimirsaeed, Fereydoon Azadeh, Mohammad Esmaeilpour Bandboni and Mohammad Hossein YektaKooshali

The purpose of this paper is to assess the quality of Iranian university libraries.

Abstract

Purpose

The purpose of this paper is to assess the quality of Iranian university libraries.

Design/methodology/approach

This first systematic review and meta-analysis were based on the PRISMA guidelines by searching in national and international databases from 2003 to January 2017 with standard Persian and English keywords. Data searching, extracting and quality appraising were completed by two researchers, independently. Any unexpected documents were assessed by a third expert researcher. Data were extracted in accordance with the “Strength of the Reporting of Observational Studies in Epidemiology” checklist after the final selection of appraised documents. Random effects size based on Cochrane test and I2 were used for combining the obtained results from different studies together by considering the heterogeneity of studies.

Findings

Based on the meta-analysis conducted in 25 (6.42 percent) included studies, the total sample size was estimated. According to three dimensions of LibQUAL, findings of current information control, affect of service and the library as a place were estimated as 5.37 [CI95%: 5.02, 5.73], 6.91 [CI95%: 5.56, 6.26], and 5.46 percent [CI95%: 5.2, 5.73], respectively. Also, mean of service adequacy and superiority gap are equal to 0.07 [CI95%: −0.22, 0.36] and −2.06 [CI95%: −2.89, −1.23], respectively. There was a significant correlation between three dimensions of service quality and service superiority gap of LibQUAL and geographical regions of Iran (p<0.01). Also, a significant correlation was found between the gaps of services and three aspects of LibQUAL model and published years through a meta-regression test (p<0.01).

Practical implications

The results obtained from the present study showed that users are relatively satisfied with the quality of services provided by Iranian university libraries. An improvement in the quality of library services can promote the scientific level of universities.

Originality/value

The results of the present systematic review and meta-analysis study demonstrate a vital connection between primary research studies and decision-making for policymakers in Iranian university libraries to increase quality services.

Details

Performance Measurement and Metrics, vol. 19 no. 3
Type: Research Article
ISSN: 1467-8047

Keywords

Article
Publication date: 2 March 2022

Sharareh Farhad, Mohammad Javad Maghsoodi Tilaki and Massoomeh Hedayati Marzbali

The study aims to evaluate the relationship among architectural identity, physical identity and neighborhood attachment in a residential neighborhood in the core of Sanandaj, Iran.

Abstract

Purpose

The study aims to evaluate the relationship among architectural identity, physical identity and neighborhood attachment in a residential neighborhood in the core of Sanandaj, Iran.

Design/methodology/approach

This quantitative study conducted a survey of 208 residents in a historic neighborhood. The study hypothesized the mediating role of physical identity on the relationship between architectural identity and neighborhood attachment. Structural equation modeling using analysis of a moment structures (AMOS) software was used to test the research hypotheses.

Findings

Research findings show the reliability and validity of the proposed model. The results indicate a significant relationship between architectural and physical identity and a significant direct relationship between physical identity and neighborhood attachment. However, no significant direct relationship is found between architectural identity and neighborhood attachment, and only a significant indirect effect is found through physical identity. Therefore, architectural identity elements contribute to increasing physical identity and subsequently attach to the neighborhood.

Originality/value

Given the necessity for revitalizing the neighborhoods in the historical core of the cities to prevent the migration from old neighborhoods and the destruction of the valuable fabrics, establishing emotional relationships between residents and the place and improving interactions among residents is required. The mental values of residents change over time. Although the identification and use of identity elements in residential buildings is a significant way to revitalize the historic residential fabrics, only a few studies have experimentally assessed the impact of architectural identity elements in the creation of physical identity on the residents’ attachment to the historic neighborhood.

Details

Housing, Care and Support, vol. 25 no. 2
Type: Research Article
ISSN: 1460-8790

Keywords

Article
Publication date: 5 July 2022

Sashi Rekha Balakrishnan, Vasanthi Soundararajan and Satyanarayana Parayitam

As teachers are considered “knowledge workers,” the present study explores teacher performance in schools. A particular emphasis is given to assessing the performance of female…

Abstract

Purpose

As teachers are considered “knowledge workers,” the present study explores teacher performance in schools. A particular emphasis is given to assessing the performance of female teachers in the rural part of South India.

Design/methodology/approach

After collecting data from 563 female teachers from four blocks in Nilgiris District (Ooty, Kotagiri, Coonoor and Gudalur) consisting of 37 government schools in the southern part of India, all the female teachers were surveyed, and the data were analyzed after checking the instrument's psychometric properties by performing confirmatory factor analysis. Hierarchical regression was employed to test the hypotheses.

Findings

The findings revealed that (1) empowerment, organizational communication and work–life balance (WLB) and recognition and rewards are positively and significantly related to teacher performance; (2) recognition and rewards moderate the relationship between (a) empowerment and performance, (b) organizational communication and performance, (c) WLB and performance, (d) organizational culture and performance and (e) quality of work-life (QWL) and performance.

Research limitations/implications

As with any survey research, common method bias and social desirability bias may be potential limitations. However, proper care is taken to minimize these biases. The findings from this study contribute to the growing literature on education and training. In addition, the study highlights the importance of creating a climate for empowerment, recognition and rewards to foster teacher performance.

Practical implications

The study helps administrators and policymakers to understand the antecedents of teacher performance and take necessary steps to motivate the teachers for superior performance.

Originality/value

The conceptual model the authors developed and tested is, according to the authors' knowledge, the first of the model's kind. A clear understanding of the predictors of teacher performance may guide the administrators and teaches in fostering performance in schools. The exclusive focus on female teachers is considered in this study because of the several problems the female teachers encounter in rural areas. Despite the disadvantages, female teachers perform well and contribute to students and the country as a whole.

Details

International Journal of Educational Management, vol. 36 no. 6
Type: Research Article
ISSN: 0951-354X

Keywords

Open Access
Article
Publication date: 6 February 2023

Assunta Di Vaio, Badar Latif, Nuwan Gunarathne, Manjul Gupta and Idiano D'Adamo

In this study, the authors examine artificial knowledge as a fundamental stream of knowledge management for sustainable and resilient business models in supply chain management…

9293

Abstract

Purpose

In this study, the authors examine artificial knowledge as a fundamental stream of knowledge management for sustainable and resilient business models in supply chain management (SCM). The study aims to provide a comprehensive overview of artificial knowledge and digitalization as key enablers of the improvement of SCM accountability and sustainable performance towards the UN 2030 Agenda.

Design/methodology/approach

Using the SCOPUS database and Google Scholar, the authors analyzed 135 English-language publications from 1990 to 2022 to chart the pattern of knowledge production and dissemination in the literature. The data were collected, reviewed and peer-reviewed before conducting bibliometric analysis and a systematic literature review to support future research agenda.

Findings

The results highlight that artificial knowledge and digitalization are linked to the UN 2030 Agenda. The analysis further identifies the main issues in achieving sustainable and resilient SCM business models. Based on the results, the authors develop a conceptual framework for artificial knowledge and digitalization in SCM to increase accountability and sustainable performance, especially in times of sudden crises when business resilience is imperative.

Research limitations/implications

The study results add to the extant literature by examining artificial knowledge and digitalization from the resilience theory perspective. The authors suggest that different strategic perspectives significantly promote resilience for SCM digitization and sustainable development. Notably, fostering diverse peer exchange relationships can help stimulate peer knowledge and act as a palliative mechanism that builds digital knowledge to strengthen and drive future possibilities.

Practical implications

This research offers valuable guidance to supply chain practitioners, managers and policymakers in re-thinking, re-formulating and re-shaping organizational processes to meet the UN 2030 Agenda, mainly by introducing artificial knowledge in digital transformation training and education programs. In doing so, firms should focus not simply on digital transformation but also on cultural transformation to enhance SCM accountability and sustainable performance in resilient business models.

Originality/value

This study is, to the authors' best knowledge, among the first to conceptualize artificial knowledge and digitalization issues in SCM. It further integrates resilience theory with institutional theory, legitimacy theory and stakeholder theory as the theoretical foundations of artificial knowledge in SCM, based on firms' responsibility to fulfill the sustainable development goals under the UN's 2030 Agenda.

Details

Journal of Enterprise Information Management, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 1741-0398

Keywords

1 – 9 of 9