Search results

The study aims to assess the efficiency of nanocomposite to improve the properties of gap-filling materials for pottery artifacts.

Five different pastes were used in the laboratory studies. The pastes consist mainly of pottery powder (grog), dental plaster, microballoons and an adhesive of Primal AC33, nano-silica and nano kaolinite in various concentrations. The prepared samples were subjected to accelerated heat and light aging. Besides, some investigations were used to evaluate the efficacy of the additive nanomaterials, such as TEM, digital and scanning electron microscopy microscopes. Contact angle, color change, shrinkage degree, physical properties and compressive strength tests were also conducted.

The results indicated that using Nano-silica considerably improves the mechanical strength and decreases the shrinkage of gap-filling materials. According to the results, a mixture of grog, microballoons and Primal AC33/Nano-silica Nanocomposites is the optimal gap-filling paste for archaeological pottery. Moreover, this paste showed a higher contact angle (120°), lower color change (ΔE = 2.62), lower shrinkage (3.3%), lower water absorption (3.36%), lower porosity (5.05%) and higher compressive strength (5124 N/mm²).

This paper attains to develop an economic polymer-nanocomposite that can be used with gap-filling materials for pottery artifacts.

This study aims to offer an effective nanocomposite for potential use to consolidate and protect deteriorated archaeological pottery.

Three nanocomposites were used in the experimental study. This study used nano Primal AC33, silicon dioxide (SiO₂) and montmorillonite (MMT) nanoparticles to protect and consolidate pottery specimens. Pottery specimens were made at 800°C for this investigation. Consolidation materials were applied with a brush. The properties of the treated pottery specimens were assessed using several methods such as digital and scanning electron microscopes, static water contact angle, color alteration, physical properties and compressive strength.

Microscopic examination indicated the ability of the nano Primal AC33/MMT nanocomposites to cover the outer surface well and bind the inner granules. Concerning specimens with code F treated with nano Primal AC33 5%/MMT 3% nanocomposites, it achieved an increase in contact angle (120°), density (1.23 g/cm³) and compressive strength (561 kg/cm²), as well as a decrease in color change (ΔE = 2.62), water absorption (4.45%) and porosity (5.46%). The novelty of the results is due to the characteristics of nano Primal AC33 5%/MMT 3% nanocomposites used in the current study.

This study describes the significant results of the analytical methods used for evaluating consolidation materials used in this study. The findings offer useful information for the protection of archaeological pottery. The investigation indicated that nano Primal AC33 5%/MMT 3% nanocomposites gave the best results. Therefore, it is recommended to use this nanocomposite to consolidate archaeological pottery. As a result, the current work provides a promising first step in conserving archaeological pottery for future studies.

This study aims to assess the efficacy of nano-alumina (nano-Al₂O₃) in improving the performance of epoxy adhesives used to assemble archaeological glass. The conservators face a significant problem in assembling this type of artifact. Therefore, the assembling process is considered one of the important stages that must be taken care of to preserve these artifacts from damage and loss.

To evaluate the stability of adhesives, the samples were subjected to artificial aging under varying environmental conditions. Some investigative techniques and mechanical testing were used in this study to evaluate the selected materials. It includes a transmission electron microscope, X-ray diffraction, visual assessment, digital microscope, scanning electron microscopy (SEM), color change and tensile strength test.

The visual evaluation and the digital microscope results showed that the epoxy/nano-Al₂O₃ greatly resisted artificial aging. Although slight yellowing was present, it did not significantly affect the general appearance of the samples. On the other hand, the pure epoxy sample showed cracks of different sizes on its surface due to aging, as evidenced by SEM examination. Furthermore, epoxy/nano-Al₂O₃ has a better tensile strength (11.27 MPa) and slight color change (ΔE = 2.06).

The main objective of the experimental study was to identify appropriate adhesive materials that possess key properties such as non-yellowing and improved tensile strength by conducting various tests and evaluations. Ultimately, the goal was to identify materials that could serve as effective adhesives for assembling the archaeological glass.

To enhance the tribological properties of nanogrease, one of the new technologies was used to synthesize a nanogrease having carbon nanotubes (CNTs) nanoparticles (NPs) with different concentrations. The microstructures of the synthesized NPs were characterized and evaluated by x-ray diffraction spectroscopy (XRD) and transmission electron microscopy (TEM). Tribological properties of the nanogrease were evaluated using a four-ball tester. The worn surface of four steel balls was investigated by scanning electron microscopy (SEM) and energy dispersive x-ray spectroscopy (EDX).

Grease was dissolved in chloroform (10 Wt.%), at 25 °C for 1 h. In parallel, functionalized CNTs with different volume concentrations (0.5, 1, 2 and 3 Wt.%) were dispersed in N, N-dimethylformamide. The mixture was stirred for 15 min and then sonicated (40 kHz, 150 W) for 30 min. After that, the mixture was added to the grease solution and magnetically stirred for 15 min and then sonicated for 2 h.

The results suggested that CNTs can enhance the antiwear and friction properties of nanogrease at 0.5 Wt.% CNTs to about 57 and 48 per cent, respectively. In addition, the weld load of the base oil containing 0.5 Wt.% CNTs was improved by 17 per cent compared with base grease.

This work describes the inexpensive and simple fabrication of nanogrease for improving the properties of lubricants, which improve power efficiency and extend lifetimes of mechanical equipment.

This work describes the fabrication of composite nanogrease based on carbon nanotubes (CNTs) as an additive at different volume concentrations 0, 0.5, 1, 2 and 3 Wt.% and investigates the correlation between CNTs and grease rheological behaviour. In addition, study the influence of shear thinning rate at various temperatures and investigates the thermal conductivity of nanogrease. The results demonstrated that grease behaves like a Newtonian viscoelastic material with a narrow linear domain. The thermal conductivity of nanogrease was enhanced by about 31.58 per cent, and the thermal and mechanical stabilities improved. Moreover, the apparent viscosity and dropping point increased by about 93 and 27 per cent, respectively.

Grease was dissolved in chloroform (10 Wt.%), at 25°C for 1 h. In parallel, functionalized CNTs with different volume concentrations (0.5, 1, 2 and 3 Wt.%) were dispersed in N,N-dimethylformamide; the dispersion was stirred for 15 min, and then sonicated (40 kHz, 150 W) for 30 min. Grease solution was then added to the CNTs. The nanofluid was magnetically stirred for 15 min and then sonicated for 2 h. This ensured uniform dispersion of nanoparticles in the base fluid.

Inexpensive and simple fabrication of nanogrease. Thermal conductivity of nanogrease was typically enhanced compared to other reported studies. Apparent viscosity and dropping point increases with the increase the volume concentration.

This work describes the inexpensive and simple fabrication of nanogrease for improving properties of lubricants, which improve power efficiency and extend lifetimes of mechanical equipment.

This study used data envelopment analysis (DEA) models to measure financial efficiency of twelve commercial banks listed in the Egyptian stock exchange (CBLSE), along with evaluating changes to the financial efficiency during the period 2017–2019.

The study used BCC-I, cross-efficiency, super-efficiency models, and Malmquist productivity index (MPI) to assess financial efficiency of the examined banks. The available data from both inputs and outputs were analyzed using R. studio V.I.3. 1056 software.

Out of twelve banks examined, only four banks were efficient under BCC-I model over different years of the study period; however, only one bank (CIB) appeared to be the most efficient compared to other peers in the study sample. Moreover, MPI results revealed decreased financial efficiency during the study period, due to the decreased technological innovation, except for HDB. Tobit regression results confirmed that total assets and total equity are significant factors impacted financial efficiency of CBLSE.

This study sheds light on the importance of evaluating financial efficiency of CBLSE to all stakeholders, to pinpoint weaknesses in banks' performance, and for evaluating financial policies and investment decisions.

Several studies sought to implement different models of DEA to assess banking performance in different regions of the world, but very few studies examined financial efficiency of banks. To the best of authors’ knowledge, this study is one of those few that addressed financial efficiency of banks in Egypt.

This paper explores the impact of tone complexity on the cost of debt in the USA.

A sampling from 692 publicly nonfinancial-traded companies in the USA is employed over the period between 2010 and 2018. Generalized methods of moments (GMM) model is implemented to examine the impact of tone complexity on the cost of debt and its implications upon creditors and users.

The findings show that high-tone complexity is associated with a greater cost of debt. The use of a more complex tone in a company's annual reports has been shown to influence creditors' perceptions of risk.

This research pursues innovation by examining how creditors can use the tone complexity of annual report to assess the level of information asymmetry and estimate the required rate of return accordingly.

This paper aims to examine the specific role that partnerships play in the relationship between adaptation strategy, international experience, and export performance of handicraft firms in an emerging country setting. The authors' purpose is to identify the key factors that may contribute to the success of export activities of small handicraft companies in international markets.

Drawing on a non-probability sampling technique, the authors collected survey data from 410 handicraft companies located in Morocco. The authors' conceptual model, which draws on the network theory, was tested using covariance-based Structural Equation Modeling by means of AMOS 24 Software.

The results indicate that adaptation marketing strategy and partnerships impact positively the export performance of handicraft firms. Partnerships also play an intermediary role by partially (fully) mediating the relationship between adaptation strategy (international experience) and export performance.

This study may assist marketers and entrepreneurs in handicraft companies to better understand the causal relationship between adaptation strategy, marketing experience and export performance of entrepreneurs' firms. Managers in these companies should be aware of the importance that partnerships play in boosting the export performance through marketing practices and experience.

The authors' paper contributes to the scant literature on the adaptation marketing strategy and export performance and the intermediary role of partnerships in the specific context of handicraft businesses operating in North African emerging markets, namely Morocco.

The purpose of this study is to develop functional probiotic Labneh cheeses supplemented with broccoli florets.

Probiotic Labneh cheese was produced using broccoli florets paste at four different levels (0, 5, 10 and 15%), with Lactobacillus casei NRRL B-1922 as a probiotic strain, to evaluate its physicochemical, phenols, antioxidant activity, minerals, vitamins, textural, microbiological and sensory characteristics during storage for 15 days.

The results indicated that Labneh cheese with added broccoli paste exhibited significantly (p = 0.05) higher level of moisture, acidity, soluble nitrogen, phenols, antioxidant activity, minerals and B vitamins, and lower protein, fat, ash and pH values when compared to control Labneh cheese. Textural analysis of Labneh cheese indicated that Labneh with higher level of broccoli (15%) exhibited harder texture than others. Higher viable counts of Lactobacillus casei and Streptococcus thermophilus were detected in Labneh with broccoli paste, and the counts (107 cfu/g) were higher than the number should be present to achieve their health benefits. The most acceptable Labneh cheeses were those supplemented with 5 and 10% broccoli paste.

This study revealed broccoli florets could enhance the growth of Lactobacillus casei and Streptococcus thermophilus in the Labneh matrix, which resulted in a wider spectrum of health benefits of Labneh cheese to the consumers.

This paper explores the factors that shape the complexity of company annual reports in the USA. Using a general-to-specific modeling approach, this study examines the determinants of annual reports' tone complexity.

Negative relationships were found between agency problems and tone; agency costs and readability of annual reports; profitability and tone; and ownership structure and tone complexity.

These relationships helped to confirm several of this study’s hypotheses, whereas positive associations were found between investment growth opportunities and tone complexity, which contradicts one of our initial hypotheses. Findings reveal that the more complex the language in an annual report is, the more difficult it is to strategically make a judgment or decision about the reported financial situation.

Analyzing these variables allows security analysts and investors to obtain important information, not available in the financial statements, which would enhance their understanding of the firm and improve their recommendations and investment decision-making process.