Search results

The consolidation process and morphology evolution in ceramics-based additive manufacturing (AM) are still not well-understood. As a way to better understand the ceramic selective laser sintering (SLS), a dynamic three-dimensional computational model was developed to forecast thermal behavior of hydroxyapatite (HA) bioceramic.

AM has revolutionized automotive, biomedical and aerospace industries, among many others. AM provides design and geometric freedom, rapid product customization and manufacturing flexibility through its layer-by-layer technique. However, a very limited number of materials are printable because of rapid melting and solidification hysteresis. Melting-solidification dynamics in powder bed fusion are usually correlated with welding, often ignoring the intrinsic properties of the laser irradiation; unsurprisingly, the printable materials are mostly the well-known weldable materials.

The consolidation mechanism of HA was identified during its processing in a ceramic SLS device, then the effect of the laser energy density was studied to see how it affects the processing window. Premature sintering and sintering regimes were revealed and elaborated in detail. The full consolidation beyond sintering was also revealed along with its interaction to baseplate.

These findings provide important insight into the consolidation mechanism of HA ceramics, which will be the cornerstone for extending the range of materials in laser powder bed fusion of ceramics.

Despite the growing attention on the relevance of improved building management systems with cognition in recent years in the architecture, engineering, construction and operation (AECO) community, no review has been conducted to understand the human-environment interaction features of cyber-physical systems (CPS) and digital twins (DTs) in developing the concept of a cognitive building (CB). Thus, this paper aims to review existing studies on CPS and DTs for CB to propose a comprehensive system architecture that considers human-environment interactions.

Scientometric analysis and content analysis were adopted for this study.

The scientometric analysis of 1,042 journal papers showed the major themes of CPS/DTs for CB, and these can be categorized into three key technologies to realize CB in the AECO community: CPS, DTs and cognitive computing (CC). Content analysis of 44 relevant publications in the built environment assisted in understanding and evidently confirming the claim of this study on the integration of CPS and DTs for CB in construction by also involving the CC. It is found and confirmed that CB can be realized with CPS and DTs along with the CC. A CB system architecture (CBSA) is proposed from the three key technologies considering the human-environment interactions in the loop. The study discovered the potential applications of the CBSA across the building lifecycle phases, including the design, construction and operations and maintenance, with the potential promise of endowing resilience, intelligence, greater efficiency and self-adaptiveness. Based on the findings of the review, four research directions are proposed: human-environment interactions, CB for sustainable building performance, CB concept for modular buildings and moving beyond CB.

This study stands out for comprehensively surveying the intellectual core and the landscape of the general body of knowledge on CPS/DTs for CB in the built environment. It makes a distinctive contribution to knowledge as it does not only propose CBSA by integrating CPS and DTs along with CC but also suggests some potential practical applications. These may require expert judgments and real case examples to enhance reproducibility and validation.

The purpose of this study is to investigate the obstacles to mechatronics adoption in the construction industry from a Nigerian perspective. It aims to fill the knowledge gap by focusing on the specific challenges faced in developing countries, considering the unique contexts and constraints of the Nigerian construction industry.

The study used a comprehensive literature review to identify 26 obstacles to mechatronics adoption. These obstacles were used to develop a well-structured questionnaire, which was then distributed to construction professionals using Google Forms through purposive and snowball sampling techniques. The rankings obtained from the questionnaire responses were analyzed to determine the most significant obstacles.

The study revealed the top five most significant obstacles to mechatronics adoption in the Nigerian construction industry. These obstacles include high costs of operation and maintenance, resistance to adopting new technologies, a lack of standardized protocols, insufficient maintenance capabilities and a lack of government support. Factor analysis revealed five clusters of obstacles: technological-related factors, economic-related factors, capability-related factors, government-related factors and awareness-related factors.

Findings from this study have the potential to inform decision-making, drive policy changes and guide future research efforts aimed at promoting the widespread adoption of mechatronics technologies, ultimately leading to the transformation and improvement of the construction industry as a whole.

This study contributes to the field of mechatronics adoption in the construction industry by addressing the gap in research specific to developing countries such as Nigeria. By identifying and analyzing the obstacles from a Nigerian perspective, the study offers unique insights and original findings.

The purpose of this paper is to introduce a novel cross (+) type yoke with hybrid electromagnets and new reluctance modeling to precisely calculate attraction force is given.

The comparison of attraction force and torque analyses between the proposed formulation and the existing formulation in the literature is comparatively presented. For the correctness of the force and torque values calculated in the model created, the system was created in ANSYS Maxwell and its accuracy was proved by making analyses. The maglev carrier system is inherently unstable from the point of view of control engineering. For that, it needs an active controller to eliminate this instability. For the levitation of the carrier system, it is necessary to design a controller in three axes (z, α and β). I-PD controller was designed for the air gap control of the carrier system in three axes and the controller parameters were determined by the canonical method.

While the new formulation proposed in the modeling of the carrier system has a maximum error of 1.03%, the existing formula in the literature has an error of 16.83% in the levitation distance point.

A novel cross-type hybrid carrier system has been proposed in the literature. With the double integral used in modeling the system, it takes a long time to solve symbolically, and it is difficult to simulate dynamic behavior in control validation. To solve this problem, attraction force and inclination torque values are easily characterized by new formulation and besides the simulations are conducted easily. The experimental setup was manufactured and assembled, and the carrier system was successfully levitated, and reference tracking was performed without overshoot.

The purpose of this study, most recent advancements in threedimensional (3D) printing have focused on the fabrication of components. It is typical to use different print settings, such as raster angle, infill and orientation to improve the 3D component qualities while fabricating the sample using a 3D printer. However, the influence of these factors on the characteristics of the 3D parts has not been well explored. Owing to the effect of the different print parameters in fused deposition modeling (FDM) technology, it is necessary to evaluate the strength of the parts manufactured using 3D printing technology.

In this study, the effect of three print parameters − raster angle, build orientation and infill − on the tensile characteristics of 3D-printed components made of three distinct materials − acrylonitrile styrene acrylate (ASA), polycarbonate ABS (PC-ABS) and ULTEM-9085 − was investigated. A variety of test items were created using a commercially accessible 3D printer in various configurations, including raster angle (0°, 45°), (0°, 90°), (45°, −45°), (45°, 90°), infill density (solid, sparse, sparse double dense) and orientation (flat, on-edge).

The outcome shows that variations in tensile strength and force are brought on by the effects of various printing conditions. In all possible combinations of the print settings, ULTEM 9085 material has a higher tensile strength than ASA and PC-ABS materials. ULTEM 9085 material’s on-edge orientation, sparse infill, and raster angle of (0°, −45°) resulted in the greatest overall tensile strength of 73.72 MPa. The highest load-bearing strength of ULTEM material was attained with the same procedure, measuring at 2,932 N. The tensile strength of the materials is higher in the on-edge orientation than in the flat orientation. The tensile strength of all three materials is highest for solid infill with a flat orientation and a raster angle of (45°, −45°). All three materials show higher tensile strength with a raster angle of (45°, −45°) compared to other angles. The sparse double-dense material promotes stronger tensile properties than sparse infill. Thus, the strength of additive components is influenced by the combination of selected print parameters. As a result, these factors interact with one another to produce a high-quality product.

The outcomes of this study can serve as a reference point for researchers, manufacturers and users of 3D-printed polymer material (PC-ABS, ASA, ULTEM 9085) components seeking to optimize FDM printing parameters for tensile strength and/or identify materials suitable for intended tensile characteristics.

Because of the key role of joint torque in industrial robots (IRs) motion performance control and energy consumption calculation and efficiency optimization, the purpose of this paper is to propose a deep learning torque prediction method based on long short-term memory (LSTM) recurrent neural networks optimized by particle swarm optimization (PSO), which can accurately predict the the joint torque.

The proposed model optimized the LSTM with PSO algorithm to accurately predict the IRs joint torque. The authors design an excitation trajectory for ABB 1600–10/145 experimental robot and collect its relative dynamic data. The LSTM model was trained with the experimental data, and PSO was used to find optimal number of LSTM nodes and learning rate, then a torque prediction model is established based on PSO-LSTM deep learning method. The novel model is used to predict the robot’s six joint torque and the root mean error squares of the predicted data together with least squares (LS) method were comparably studied.

The predicted joint torque value by PSO-LSTM deep learning approach is highly overlapped with those from real experiment robot, and the error is quite small. The average square error between the predicted joint torque data and experiment data is 2.31 N.m smaller than that with the LS method. The accuracy of the novel PSO-LSTM learning method for joint torque prediction of IR is proved.

PSO and LSTM model are deeply integrated for the first time to predict the joint torque of IR and the prediction accuracy is verified.

This study aims to recognize the significant barriers of small and medium-sized enterprises (SMEs) in Bangladesh, hindering the adoption of total quality management (TQM). Additionally, this research intends to explore the interrelations among these barriers to develop essential managerial insights for promoting TQM implementation in SMEs.

The interpretive structural modeling (ISM) approach and Matrice d'impacts croisés multiplication appliquée á un classment (MICMAC) a cross-impact matrix multiplication applied to classification show the relationship among the barriers and classification of the barriers to TQM implementation respectively, and partial least squares structural equation modeling (PLS-SEM) is applied for ISM model validation.

This study examined previous literature and conducted interviews with professionals to identify 17 barriers. The study then develops and investigates a model that outlines the relationships and priorities among these barriers and categorizes them based on their impact and interdependence. This analysis can assist SMEs in implementing TQM during their operations successfully.

This research emphasizes the crucial obstacles that greatly affect other barriers and require immediate attention. Furthermore, this study provides valuable information for SMEs to effectively prioritize their resources and efforts to overcome these obstacles.

This study delves into the primary obstacles impeding the integration of TQM in SMEs through a novel approach. Additionally, this study constructs a verified contextual framework that depicts the hierarchies and interconnections among these barriers.

This study assesses performance measurement (PM) system implementation efforts across various organizational contexts and investigates which factors are critical to achieving implementation success (IS).

An empirical field study was conducted to refine a framework of PM system IS that consists of 5 dimensions of success and 29 factors. A survey questionnaire was used to investigate actual organizational practice and exploratory factor analysis was conducted to refine constructs corresponding to potential factors and dimensions of IS. The resulting variables were then investigated using multiple regression analysis to identify critical success factors for implementing PM systems.

The survey was completed by representatives from 124 organizations and the exploratory factor analysis results indicated that there are three underlying dimensions of IS (i.e. Use of the System, PM System Performance, and Improved Results and Processes) and 12 factors. Of the factors, nine can be considered critical success factors having a significant relationship with at least one dimension of IS: Leader Support, Design and Implementation Approach, Reward System Alignment, Organizational Acceptance, Organizational Culture and Climate, Easy to Define Environment, IT Infrastructure Capabilities, PM System Design Quality, and PM Participation and Training.

The results show that there are distinct dimensions of IS and, although some factors are associated with all dimensions, most are more closely related to only one dimension. This suggests that different strategies should be utilized based on the types of challenges experienced during implementation.

The purpose of this study is to advance turbulent thermal convection inside the constant heat-flux round tube inserted by multiple perforated twisted tapes.

The novel design of this study is accomplished by inserting several twisted tapes and drilling some circular perforations near the tape edge (C1, C3, C5: solid tapes; C2, C4, C6: perforated tapes). The turbulence flow appearances and thermal convective features are examined for various Reynolds numbers (8,000–14,000) using the renormalization group (RNG) κ−ε turbulent model and Semi-Implicit Method for Pressure-Linked Equations (SIMPLE) algorithm.

The simulated outcomes reveal that inserting more perforated-twisted tapes into the heated round tube promotes turbulent thermal convection effectively. A swirling flow caused by the twisted tapes to produce the secondary flow jets between two reverse-spin tapes can combine with the main flow passing through the perforations at the outer edge to enhance the vortex flow. The primary factors are the quantity of twisted tapes and with/without perforations, as the perforation ratio remains at 2.5 in this numerical work. Weighing friction along the tube, C6 (four reverse-spin perforated-twisted tapes) brings the uppermost thermal-hydraulic performance of 1.23 under Re = 8,000.

The constant thermo-hydraulic attributes of liquid water and the steady Newtonian fluid are research limitations for this simulated work.

The simulated outcomes will avail the inner-pipe design of a heat exchanger inserted by multiple perforated twisted tapes to enhance superior heat transfer.

These twisted tapes form tiny circular perforations along the tape edge to introduce the fluid flow through these bores and combine with the secondary flow induced between two reverse-spin tapes. This scheme enhances the swirling flow, turbulence intensity and fluid mixing to advance thermal convection since larger perforations cannot produce large jet velocity or the position of perforations is too far from the tape edge to generate a separated flow. Consequently, this work contributes a valuable cooling mechanism toward thermal engineering.

The purpose of this paper aims to investigate the adaptive impedance control and its optimized PSO algorithm for force tracking of a dual-arm cooperative robot. Because the dual-arm robot is directly in contact with external environment, controlling the mutual force between robot and external environment is of great importance. Besides, a high compliance of the robot should be guaranteed.

An impedance control based on Particle Swarm Optimization (PSO) algorithm is designed to track the mutual force and achieve compliance control of the robot end.

The experimental results show that the impedance control coefficients can be automatically tuned converged by PSO algorithm.

The system can reach a steady state within 0.03 s with overshoot convergence, and the force fluctuation range at the steady state decreases to about ±0.08 N even under the force mutation condition.