Search results

This study investigates the impact of the fire decay phase on structural damage using the sectional analysis method. The primary objective of this work is to forecast the non-dimensional capacity parameters for the axial and flexural load-carrying capacity of reinforced concrete (RC) sections for heating and the subsequent post-heating phase (decay phase) of the fire.

The sectional analysis method is used to determine the moment and axial capacities. The findings of sectional analysis and heat transfer for the heating stage are initially validated, and the analysis subsequently proceeds to determine the load capacity during the fire’s heating and decay phases by appropriately incorporating non-dimensional sectional and material parameters. The numerical analysis includes four fire curves with different cooling rates and steel percentages.

The study’s findings indicate that the rate at which the cooling process occurs after undergoing heating substantially impacts the axial and flexural capacity. The maximum degradation in axial and flexural capacity occurred in the range of 15–20% for cooling rates of 3 °C/min and 5 °C/min as compared to the capacity obtained at 120 min of heating for all steel percentages. As the fire cooling rate reduced to 1 °C/min, the highest deterioration in axial and flexural capacity reached 48–50% and 42–46%, respectively, in the post-heating stage.

The established non-dimensional parameters for axial and flexural capacity are limited to the analysed section in the study owing to the thermal profile, however, this can be modified depending on the section geometry and fire scenario.

The study primarily focusses on the degradation of axial and flexural capacity at various time intervals during the entire fire exposure, including heating and cooling. The findings obtained showed that following the completion of the fire’s heating phase, the structural capacity continued to decrease over the subsequent post-heating period. It is recommended that structural members' fire resistance designs encompass both the heating and cooling phases of a fire. Since the capacity degradation varies with fire duration, the conventional method is inadequate to design the load capacity for appropriate fire safety. Therefore, it is essential to adopt a performance-based approach while designing structural elements' capacity for the desired fire resistance rating. The proposed technique of using non-dimensional parameters will effectively support predicting the load capacity for required fire resistance.

The fire-resistant requirements for reinforced concrete structures are generally established based on standard fire exposure conditions, which account for the fire growth phase. However, it is important to note that concrete structures can experience internal damage over time during the decay phase of fires, which can be quantitatively determined using the proposed non-dimensional parameter approach.

The present study assesses the commercial bank profit efficiency and its relationship to banking sector competition in a rapidly growing emerging economy, India from 2009 to 2019 using stochastic frontier analysis (SFA).

Lerner indices, conventional and efficiency-adjusted, quantify competition. Two SFA models are employed to calculate alternative profit efficiency (inefficiency) scores: the two-step time-decay approach proposed by Battese and Coelli (1992) and the recently developed single-step pairwise difference estimator (PDE) by Belotti and Ilardi (2018). In the first step of the BC92 framework, profit inefficiency is calculated, and in the second step, Tobit and Fractional Regression Model (FRM) are utilized to evaluate profit inefficiency correlates. PDE concurrently solves the frontier and inefficiency equations using the maximum likelihood process.

The results suggest that foreign banks are less profit efficient than domestic equivalents, supporting the “home-field advantage” hypothesis in India. Further, increasing competition drives bank managers to make riskier lending and investment choices, decreasing bank profit efficiency. However, this effect varies depending on bank ownership and size.

Literature on the competition bank efficiency link is conspicuously scant, with a focus on technical and cost efficiency. Less is known regarding the influence of competition on bank profit efficiency. The article is one of the first to examine commercial bank profit efficiency and its relationship to banking sector competition. Additionally, the study work represents one of the first applications of the FRM presented by Papke and Wooldridge (1996) and the PDE provided by Belotti and Ilardi (2018).

The aim of this paper is to empirically investigate whether social contacts can mediate the way in which current unemployment impacts future unemployment.

We use 2006–2017 data from the Household Income and Labour Dynamics in Australia (HILDA) survey and a dynamic random-effects model to describe the evolution of individual unemployment status over time.

Once controlled for the local context where individuals live and create friendships, we find that above-average social contacts reduce unemployment persistence. However, social contacts seem to be slightly less effective in deprived neighborhoods. These findings are consistent with the idea that individuals obtain information about job opportunities through a network of social contacts, and unemployment may lead to a decay of social capital, making it more difficult to find employment in future periods. Our results also show that neighborhood deprivation increases individual unemployment risk, while above-average neighborhood cohesion reduces the probability of unemployment in deprived neighborhoods.

Although many studies have been published on unemployment persistence, to the best of the author's knowledge, this is the first study quantifying the impact of social contacts on unemployment persistence. The study also offers fresh empirical evidence on the impact of neighborhood characteristics on unemployment risk.

High packaging density in the present VLSI era builds an acute power crisis, which limits the use of MOSFET device as a constituent block in CMOS technology. This leads researchers in looking for alternative devices, which can replace the MOSFET in CMOS VLSI logic design. In a quest for alternative devices, tunnel field effect transistor emerged as a potential alternative in recent times. The purpose of this study is to enhance the performances of the proposed device structure and make it compatible with circuit implementation. Finally, the performances of that circuit are compared with CMOS circuit and a comparative study is made to find the superiority of the proposed circuit with respect to conventional CMOS circuit.

Silicon–germanium heterostructure is currently one of the most promising architectures for semiconductor devices such as tunnel field effect transistor. Analytical modeling is computed and programmed with MATLAB software. Two-dimensional device simulation is performed by using Silvaco TCAD (ATLAS). The modeled results are validated through the ATLAS simulation data. Therefore, an inverter circuit is implemented with the proposed device. The circuit is simulated with the Tanner EDA tool to evaluate its performances.

The proposed optimized device geometry delivers exceptionally low OFF current (order of 10^−18 A/um), fairly high ON current (5x10^−5 A/um) and a steep subthreshold slope (20 mV/decade) followed by excellent ON–OFF current ratio (order of 10^13) compared to the similar kind of heterostructures. With a very low threshold voltage, even lesser than 0.1 V, the proposed device emerged as a good replacement of MOSFET in CMOS-like digital circuits. Hence, the device is implemented to construct a resistive inverter to study the circuit performances. The resistive inverter circuit is compared with a resistive CMOS inverter circuit. Both the circuit performances are analyzed and compared in terms of power dissipation, propagation delay and power-delay product. The outcomes of the experiments prove that the performance matrices of heterojunction Tunnel FET (HTFET)-based inverter are way ahead of that of CMOS-based inverter.

Germanium–silicon HTFET with stack gate oxide is analytically modeled and optimized in terms of performance matrices. The device performances are appreciable in comparison with the device structures published in contemporary literature. CMOS-like resistive inverter circuit, implemented with this proposed device, performs well and outruns the circuit performances of the conventional CMOS circuit at 45-nm technological node.

After the identification of a novel severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) at Wuhan, China, a pandemic was widely spread worldwide. In Italy, about 240,000 people were infected because of this virus including 34,721 deaths until the end of June 2020. To control this new pandemic, epidemiologists recommend the enforcement of serious mitigation measures like country lockdown, contact tracing or testing, social distancing and self-isolation.

This paper presents the most popular epidemic model of susceptible (S), exposed (E), infected (I) and recovered (R) collectively called SEIR to understand the virus spreading among the Italian population.

Developed SEIR model explains the infection growth across Italy and presents epidemic rates after and before country lockdown. The results demonstrated that follow-up of strict measures such that country lockdown along with high testing is making Italy practically a pandemic-free country.

These models largely help to estimate and understand how an infectious agent spreads in a particular country and how individual factors can affect the dynamics. Further studies like classical SEIR modeling can improve the quality of data and implementation of this modeling could represent a novelty of epidemic models.

The paper provides a detailed historical account of Douglass C. North's early intellectual contributions and analytical developments in pursuing a Grand Theory for why some countries are rich and others poor.

The author approaches the discussion using a theoretical and historical reconstruction based on published and unpublished materials.

The systematic, continuous and profound attempt to answer the Smithian social coordination problem shaped North's journey from being a young serious Marxist to becoming one of the founders of New Institutional Economics. In the process, he was converted in the early 1950s into a rigid neoclassical economist, being one of the leaders in promoting New Economic History. The success of the cliometric revolution exposed the frailties of the movement itself, namely, the limitations of neoclassical economic theory to explain economic growth and social change. Incorporating transaction costs, the institutional framework in which property rights and contracts are measured, defined and enforced assumes a prominent role in explaining economic performance.

In the early 1970s, North adopted a naive theory of institutions and property rights still grounded in neoclassical assumptions. Institutional and organizational analysis is modeled as a social maximizing efficient equilibrium outcome. However, the increasing tension between the neoclassical theoretical apparatus and its failure to account for contrasting political and institutional structures, diverging economic paths and social change propelled the modification of its assumptions and progressive conceptual innovation. In the later 1970s and early 1980s, North abandoned the efficiency view and gradually became more critical of the objective rationality postulate. In this intellectual movement, North's avant-garde research program contributed significantly to the creation of New Institutional Economics.

In this study, a novel framework based on deep learning models is presented to assess energy and environmental performance of a given building space layout, facilitating the decision-making process at the early-stage design.

A methodology using an image-based deep learning model called pix2pix is proposed to predict the overall daylight, energy and ventilation performance of a given residential building space layout. The proposed methodology is then evaluated by being applied to 300 sample apartment units in Tehran, Iran. Four pix2pix models were trained to predict illuminance, spatial daylight autonomy (sDA), primary energy intensity and ventilation maps. The simulation results were considered ground truth.

The results showed an average structural similarity index measure (SSIM) of 0.86 and 0.81 for the predicted illuminance and sDA maps, respectively, and an average score of 88% for the predicted primary energy intensity and ventilation representative maps, each of which is outputted within three seconds.

The proposed framework in this study helps upskilling the design professionals involved with the architecture, engineering and construction (AEC) industry through engaging artificial intelligence in human–computer interactions. The specific novelties of this research are: first, evaluating indoor environmental metrics (daylight and ventilation) alongside the energy performance of space layouts using pix2pix model, second, widening the assessment scope to a group of spaces forming an apartment layout at five different floors and third, incorporating the impact of building context on the intended objectives.

This paper provides new evidence on Indian tourism firms by investigating the role of a firm's financial conditions typified by its leverage, earnings, size, cash holdings, and excess cash in moderating the pandemic-led idiosyncratic volatility in its stock prices.

The authors employ a firm-level panel comprising 82 publicly-listed tourism firms from India. Firm risk is estimated for the period beginning January 2020 to December 2020.

This paper finds non-linear effects of the pandemic on the idiosyncratic risk of the sample firms. Precisely, stock price volatility rises, but as the market absorbs this information, volatility subsides even as the disease spreads further. Further, lower levels of past debt and earnings and higher cash holdings ameliorate the pandemic's effects on tourism firms' risk. Contrasting the view that “excess” cash reflects poor operational performance, we show that “excess” cash firms are better prepared to face the adverse effects of the pandemic.

This study’s sample period fully encompasses the first wave of the pandemic (January–December 2020) of the novel coronavirus infection spread.

To the best of the authors’ knowledge, this is the first study to assess the moderating effects of company fundamentals on the risk of Indian tourism firms. In doing so, the authors account for non-linear effects of the pandemic on firms' idiosyncratic volatility over time.

The paper aims to evaluate drying performance of earth mortar by solar drying for more durability, minimize pathologies in traditional construction and determine the influence of temperature and humidity on the microstructure of earth mortar using static gravimetric method.

A convective solar dryer was used for the pretreatment of building and solid materials for construction.

The humidity influences the mortar sorption – surface water sorption of earth mortar increased with increasing temperature.

The study used a novel method for pretreatment building materials by using solar dryer.

This article proposes a novel hybrid simulation model for understanding the complex tobacco use behavior.

The model is developed by embedding the concept of the multistage learning-based fuzzy cognitive map (FCM) into the agent-based model (ABM) in order to benefit from advantageous of each methodology. The ABM is used to represent individual level behaviors while the FCM is used as a decision support mechanism for individuals. In this study, socio-demographic characteristics of individuals, tobacco control policies, and social network effect are taken into account to reflect the current tobacco use system of Turkey. The effects of plain package and COVID-19 on tobacco use behaviors of individuals are also searched under different scenarios.

The findings indicate that the proposed model provides promising results for representing the mental models of agents. Besides, the scenario analyses help to observe the possible reactions of people to new conditions according to characteristics.

The proposed method combined ABM and FCM with a multi-stage learning phases for modeling a complex and dynamic social problem as close as real life. It is expected to contribute for both ABM and tobacco use literature.