Search results

In this paper, a mixture of exponential and Rayleigh distributions in the proportions α and 1 − α and all the parameters in the mixture distribution are estimated based on fuzzy data.

The methods such as maximum likelihood estimation (MLE) and method of moments (MOM) are applied for estimation. Fuzzy data of triangular fuzzy numbers and Gaussian fuzzy numbers for different sample sizes are considered to illustrate the resulting estimation and to compare these methods. In addition to this, the obtained results are compared with existing results for crisp data in the literature.

The application of fuzziness in the data will be very useful to obtain precise results in the presence of vagueness in data. Mean square errors (MSEs) of the resulting estimators are computed using crisp data and fuzzy data. On comparison, in terms of MSEs, it is observed that maximum likelihood estimators perform better than moment estimators.

Classical methods of obtaining estimators of unknown parameters fail to give realistic estimators since these methods assume the data collected to be crisp or exact. Normally, such case of precise data is not always feasible and realistic in practice. Most of them will be incomplete and sometimes expressed in linguistic variables. Such data can be handled by generalizing the classical inference methods using fuzzy set theory.

Preventative health services are keen to identify how to engage men and increase their participation, thus improving health, well-being and life expectancy over time. Prior research has shown general gender norms are a key reason for men’s avoidance of these services, yet there is little investigation of specific gender norms. Furthermore, masculinity has not been examined as a factor associated with customer vulnerability. This paper aims to identify the relationship between gender norm segments for men, likely customer vulnerability over time and subjective health and well-being.

Adult males (n = 13,891) from an Australian longitudinal men’s health study were classified using latent class analysis. Conditional growth mixture modelling was conducted at three timepoints.

Three masculinity segments were identified based on masculine norm conformity: traditional self-reliant, traditional bravado and modern status. All segments had likely customer experience of vulnerability. Over time, the likely experience was temporary for the modern status segment but prolonged for the traditional self-reliant and traditional bravado segments. The traditional self-reliant segment had low subjective health and low overall well-being over time.

Practitioners can tailor services to gender norm segments, enabling self-reliant men to provide expertise and use the “Status” norm to reach all masculinity segments.

The study of customer vulnerability in a group usually considered privileged identifies differential temporal experiences based on gender norms. The study confirms customer vulnerability is temporal in nature; customer vulnerability changes over time from likely to actual for self-reliant men.

This paper aims to investigate the difference between the impacts of indicators of trade barriers (TBs) on bankrupt enterprises (BEs), new enterprises (NEs) and other enterprises (OEs).

The paper has used a multiple-step approach. At the first stage, the initial data has been collected from interviews with 164 top managers of SMEs in West Azerbaijan in Iran during two periods of 2013–2015 and 2017–2019. At the second step, multiple correspondence analysis has been used to summarize the relationships between variables and construct indices for different groups of TBs. Finally, the generalized structural equation model method was used to examine the impact of export barriers.

The results showed that the political legal index is the main TBs for BEs and NEs, but it had a more significant impact on BEs; the financial index was the second major TBs factor for BEs, while OEs did not have a problem in performance index, and the financial index was classified as a minor obstacle for them. All indicators of marketing barriers (except production index) had a negative and significant effect on all enterprises; the most important TBs for NEs was the information index.

The results indicated that if enterprises have a strong financial system and function, they can lessen the impact of sanctions and keep themselves in the market.

This study empirically demonstrates a contradiction between pillar 3 of Basel norms III and the designation of Systemically Important Banks (SIBs), also known as Too Big to Fail (TBTF). The objective of this study is threefold, which has been approached in a phased manner. The first is to determine the systemic importance of the banks under study; second, to examine if market discipline exists at different levels of systemic importance of banks and lastly, to examine if the strength of market discipline varies at different levels of systemic importance.

This study is based on all the public and private sector banks operating in the Indian banking sector. The Gaussian Mixture Model algorithm has been utilized to classify banks into distinct levels of systemic importance. Thereafter, market discipline has been observed by analyzing depositors' sentiments toward banks' risk (CAMEL indicators). The analysis has been performed by employing the system Generalized Method of Moments (GMM) to estimate models with different dependent variables.

The findings affirm the existence of market discipline across all levels of systemic importance. However, the strength of market discipline varies with the systemic importance of the banks, with weak market discipline being a negative externality of the SIBs designation.

By employing the Gaussian Mixture Model algorithm to develop a framework for categorizing banks on the basis of their systemic importance, this study is the first to go beyond the conventional method as outlined by the Reserve Bank of India (RBI).

This paper aims to propose a robust method for non-rigid point set registration, using the Gaussian mixture model and accommodating non-rigid transformations. The posterior probabilities of the mixture model are determined through the proposed integrated feature divergence.

The method involves an alternating two-step framework, comprising correspondence estimation and subsequent transformation updating. For correspondence estimation, integrated feature divergences including both global and local features, are coupled with deterministic annealing to address the non-convexity problem of registration. For transformation updating, the expectation-maximization iteration scheme is introduced to iteratively refine correspondence and transformation estimation until convergence.

The experiments confirm that the proposed registration approach exhibits remarkable robustness on deformation, noise, outliers and occlusion for both 2D and 3D point clouds. Furthermore, the proposed method outperforms existing analogous algorithms in terms of time complexity. Application of stabilizing and securing intermodal containers loaded on ships is performed. The results demonstrate that the proposed registration framework exhibits excellent adaptability for real-scan point clouds, and achieves comparatively superior alignments in a shorter time.

The integrated feature divergence, involving both global and local information of points, is proven to be an effective indicator for measuring the reliability of point correspondences. This inclusion prevents premature convergence, resulting in more robust registration results for our proposed method. Simultaneously, the total operating time is reduced due to a lower number of iterations.

The authors aim to develop a conceptual framework for longitudinal estimation of stress-related states in the wild (IW), based on the machine learning (ML) algorithms that use physiological and non-physiological bio-sensor data.

The authors propose a conceptual framework for longitudinal estimation of stress-related states consisting of four blocks: (1) identification; (2) validation; (3) measurement and (4) visualization. The authors implement each step of the proposed conceptual framework, using the example of Gaussian mixture model (GMM) and K-means algorithm. These ML algorithms are trained on the data of 18 workers from the public administration sector who wore biometric devices for about two months.

The authors confirm the convergent validity of a proposed conceptual framework IW. Empirical data analysis suggests that two-cluster models achieve five-fold cross-validation accuracy exceeding 70% in identifying stress. Coefficient of accuracy decreases for three-cluster models achieving around 45%. The authors conclude that identification models may serve to derive longitudinal stress-related measures.

Proposed conceptual framework may guide researchers in creating validated stress-related indicators. At the same time, physiological sensing of stress through identification models is limited because of subject-specific reactions to stressors.

Longitudinal indicators on stress allow estimation of long-term impact coming from external environment on stress-related states. Such stress-related indicators can become an integral part of mobile/web/computer applications supporting stress management programs.

Timely identification of excessive stress may improve individual well-being and prevent development stress-related diseases.

The study develops a novel conceptual framework for longitudinal estimation of stress-related states using physiological and non-physiological bio-sensor data, given that scientific knowledge on validated longitudinal indicators of stress is in emergent state.

This paper aims to examine project management segments based on customer satisfaction drivers and loyalty rather than traditional demographic or behavioural variables.

Data were gathered over 18 consecutive months, and 3,129 surveys were completed using a questionnaire. The statistical methods included partial least squares (PLS) structural equation modelling, finite mixture segmentation, prediction-oriented segmentation (PLS-POS) and multi-group analysis (PLS-MGA).

The findings indicate the existence of three segments among system delivery project customers based on the differences in the strengths of the path coefficients in the customer-centric structural model. In Segment 1, satisfaction based on the proposal was crucial for loyalty, with the value-for-money construct negatively impacting the repurchase intent construct. Segment 2 had a solid value-for-money orientation. In Segment 3, the critical path indicated that satisfaction drove repurchase intention, with satisfaction based mainly on the installation.

The research contributes to the segmentation theory by introducing a new way to segment the systems delivery projects customers based on the perceived strength of the relationships in a customer-centric structural model, which aligns with traditional segmentation theory in a way that most segmentation analyses do not. A new segmentation approach to the domain of project management theory is presented. Based on the results, treating the system delivery project customer base as a single homogenous group can lead to managerially misleading conclusions.

Qatar, a wealthy country with an open economy has limited arable land. To meet its domestic food demand, the country heavily relies on food imports. Additionally, the over three year-long economic embargo enforced by regional neighbors and the covariate shock of the COVID-19 pandemic have demonstrated the country's vulnerability to food insecurity and potential for structural breaks in macroeconomic data. The purpose of this paper is to examine short- and long-run determinants of Qatar's imports of aggregate food, meats, dairy and cereals in the presence of structural breaks.

The authors use 24 years of food imports, gross domestic product (GDP) and consumer price index (CPI) data obtained from Qatar's Planning and Statistics Authority. They use the autoregressive distributed lag (ARDL) cointegration framework and Chambers and Pope's exact nonlinear aggregation approach.

Unit root tests in the presence of structural breaks reveal a mixture of I (1) and I (0) variables for which standard cointegration techniques do not apply. The authors found evidence of a significant long-run relationship between structural changes and food imports in Qatar. Impulse response functions indicate full adjustments within three-quarters of a year in the event of an exogenous shock to imports.

An exogenous shock of one standard deviation on this variable would reduce Qatar's food imports by about 2.5% during the first period but recover after the third period.

The failure of past aggregate food demand studies to go beyond standard unit root testing creates considerable doubt about the accuracy of their elasticity estimates. The authors avoid that to provide more credible findings.

From a supply chain perspective, logistics firms collaborate with other supply chain members to extend their business scope. Investment in circular economy projects in the supply chain can not only broaden the scope of business but also increase the value of the entire supply chain. Third-party logistics companies are gradually participating in the construction and operation of many circular economy projects. How to coordinate multiple circular economy supply chain projects is at the core of its operation.

This paper first analyzes some typical supply chain projects in China and summarizes the main features of these projects. Secondly, considering the benefits of the project and the stakes of each project, a multi-stage stochastic programming model is established. Finally, Cplex, nested decomposition, LocalSolver and other methods are adopted to simulate and analyze the model.

The final experimental results find that the importance of coordinating multiple circular economy supply chain projects to increase the value of the entire supply chain. The multi-stage stochastic programming model presented in this research can provide a useful tool for logistics enterprises and third-party logistics companies to optimize their investment decisions and maximize their profits in the context of a circular economy.

There are still some limitations to this study; for example, it is limited to the analysis of circular economy supply chain projects in China. The study focused on third-party logistics companies, and other enterprises in the circular economy supply chain were not considered. The research also assumed that the benefits of each circular economy project and the stakes of each project were known, which may not always be the case in real-world scenarios.

This manuscript found that investing in other circular economy projects in the supply chain can broaden the scope of business and increase the value of the entire supply chain. Third-party logistics companies are gradually participating in the construction and operation of many circular economy projects, such as recycling and repurposing initiatives. It highlights the importance of coordinating multiple circular economy supply chain projects to increase the value of the entire supply chain. The multi-stage stochastic programming model presented in this research can provide a useful tool for logistics enterprises and third-party logistics companies to optimize their investment decisions and maximize their profits in the context of a circular economy.

In Germany, various approaches have been taken to tackle the current teacher shortage in technical and vocational education and training (TVET). One attempt to remedy the shortage in Bavaria has been the introduction of an engineering education study programme at universities of applied sciences. Ideal candidates for this programme should have an interest in both engineering and social interaction. For effective recruitment, therefore, it is necessary to know applicants’ characteristics such as their vocational interests. In this study, the vocational interest profiles of students in TVET teacher training programmes were identified and their interest profiles and further characteristics were compared with those of other VET students at universities and universities of applied sciences.

An online questionnaire based on Holland’s interest theory and adapted from the Allgemeiner-Interessen-Struktur-Test-3 (interest structure test) was administered to 85 students in TVET teacher training programmes at universities and universities of applied sciences in Bavaria. Items regarding reasons for choosing a particular study programme, university location and other personal details were added.

The vocational interest profiles of students at universities and universities of applied sciences can be described as similar but weakly differentiated. Insights are provided by the characteristics of students such as the majority being first-time academics in the family. The reasons for choosing the degree programme and university location highlight the fact that a large proportion of students in engineering education would not have chosen a teaching-related degree programme if it had not been offered at the respective university of applied sciences.

Although the sample in this study was small and, therefore, limiting, it represented a high proportion of TVET teacher training students in Bavaria and a substantial proportion of first-year students in TVET teacher training programmes at universities and universities of applied sciences in Bavaria (section 2.2 and 3.1). Thus, the findings provide valuable insights into commonalities in interest profiles between engineering education students at universities of applied sciences and other TVET students at universities. With respect to the domain of the chosen vocational specialisation, differentiated profiles emerged that, for example, showed a stronger artistic orientation among students in construction technology/wood. For further analysis, the previous variable-centred orientation of the analysis can be supplemented by person-centred analyses (e.g. cluster analysis and latent variable mixture modelling, LVMM) (cf. Leon et al., 2021).

The findings in this study reveal the potential for attracting candidates to universities of applied sciences if they prefer to study in rather rural areas close to their hometowns. With the aim to educate prospective teachers for future work not only in metropolitan regions but in rural areas too, offering bachelor degree programmes in rural areas would seem promising. A regional option can boost the recruitment of new students and attract candidates that otherwise would be unable to pursue studies or a career as a teacher in vocational education. The results of this study and those of previous studies suggest that universities of applied sciences can cooperate with universities to help solve the teacher shortage problem.

Overall, it is apparent that the students' interests reached comparatively high values in all interest orientations and thus are only weakly differentiated. If undifferentiated profiles indicate low levels of career readiness, this significantly affects the recruitment of young people for the teaching profession. Assessing career orientation and promoting vocational interests should be prioritised during secondary school education. Vocational orientation measures are essential and should provide insight into typical activities of daily work life in different professions and thus pique and foster interests.

This study provides insight into how to respond to the teacher shortage in VET by identifying important characteristics of engineering education students using vocational interest profiling.