Search results
1 – 4 of 4Lan Chu, Chao Guo, Qing Zhang, Qing Wang, Yiwen Ge, Mingyang Hao and Jungang Lv
This study aims to using Fourier transform infrared (FTIR) spectroscopy, Raman spectroscopy and scanning electron microscope/energy dispersive Xray spectrometer to identify…
Abstract
Purpose
This study aims to using Fourier transform infrared (FTIR) spectroscopy, Raman spectroscopy and scanning electron microscope/energy dispersive Xray spectrometer to identify different automotive coatings for forensic purpose.
Design/methodology/approach
Two four-layered samples in a hit-and-run case were compared layer by layer with three different methods. FTIR spectroscopy was used to primarily identify the organic and inorganic compositions. Raman spectrum and scanning electron microscope/energy dispersive Xray spectrometer (SEM-EDS) were further used to complement the FTIR results.
Findings
Two weak and tiny peaks in one layer found between two samples by FTIR, Raman microscope and SEM-EDS verified the result of differences. The study used the three instruments in combination and found it’s effective in sensing coatings, especially in the inorganic additives.
Research limitations/implications
Using these three instruments in combination is more accurate than individually in multilayered coating analysis for forensic purpose.
Practical implications
The three different instruments all present unique information on the composition, and provided similar and mutually verifiable results on the two samples.
Originality/value
With this method, scientists could identify and discriminate important coating evidences with tiny but characteristic differences.
Details
Keywords
Yibin Ao, Panyu Peng, Mingyang Li, Jiayue Li, Yan Wang and Igor Martek
Building Information Modeling (BIM) competitions are a beneficial approach to enhance BIM education, offering students practical experience in BIM application, including mastering…
Abstract
Purpose
Building Information Modeling (BIM) competitions are a beneficial approach to enhance BIM education, offering students practical experience in BIM application, including mastering workflows and technical tools. However, research exploring the individual perceptions influencing participation intentions and behaviors in BIM competitions is limited. Therefore, this study aims to investigate the factors affecting university students' behavioral intention and behavior in BIM competitions, providing theoretical support for BIM competitions and educational reform.
Design/methodology/approach
This study employs the Structural Equation Modeling (SEM) based on the Unified Theory of Acceptance and Use of Technology (UTAUT) framework to analyze the factors influencing BIM competition participation among 970 Architecture, Engineering, and Construction (AEC) university students.
Findings
The results of the study show that social influence, attitude, and self-efficacy play critical roles in shaping students' intentions to participate in BIM competitions. Furthermore, self-efficacy, facilitating conditions, and behavioral intention significantly influence students' actual engagement in such competitions. Surprisingly, effort expectancy negatively influences intentions, as less challenging tasks can lead students to perceive their participation as less impactful on their skills and learning, reducing their behavioral intention to participate.
Originality/value
This research provides valuable insights into the effectiveness of BIM competitions in enhancing BIM education for AEC students. Extending the UTAUT model to include self-efficacy and attitude, provides a novel perspective for understanding students' intentions and behaviors regarding BIM competitions. The study’s theoretical support proposes incorporating BIM competitions to augment BIM teaching methods and offers suggestions for advancing the efficacy of students' involvement in BIM competitions within higher education, thus contributing to educational reform in the AEC sector.
Details
Keywords
Liang Ma, Qiang Wang, Haini Yang, Da Quan Zhang and Wei Wu
The aim of this paper is to solve the toxic and harmful problems caused by traditional volatile corrosion inhibitor (VCI) and to analyze the effect of the layered structure on the…
Abstract
Purpose
The aim of this paper is to solve the toxic and harmful problems caused by traditional volatile corrosion inhibitor (VCI) and to analyze the effect of the layered structure on the enhancement of the volatile corrosion inhibition prevention performance of amino acids.
Design/methodology/approach
The carbon dots-montmorillonite (DMT) hybrid material is prepared via hydrothermal process. The effect of the DMT-modified alanine as VCI for mild steel is investigated by volatile inhibition sieve test, volatile corrosion inhibition ability test, electrochemical measurement and surface analysis technology. It demonstrates that the DMT hybrid materials can improve the ability of alanine to protect mild steel against atmospheric corrosion effectively. The presence of carbon dots enlarges the interlamellar spacing of montmorillonite and allows better dispersion of alanine. The DMT-modified alanine has higher volatilization ability and an excellent corrosion inhibition of 85.3% for mild steel.
Findings
The DMT hybrid material provides a good template for the distribution of VCI, which can effectively improve the vapor-phase antirust property of VCI.
Research limitations/implications
The increased volatilization rate also means increased VCI consumption and higher costs.
Practical implications
Provides a new way of thinking to replace the traditional toxic and harmful VCI.
Originality/value
For the first time, amino acids are combined with nano laminar structures, which are used to solve the problem of difficult volatilization of amino acids.
Details
Keywords
Haocheng Bi, Muming Hao, Baojie Ren, Sun Xinhui, Tianzhao Li and Kailiang Song
The purpose of this paper is to investigate the monitoring of the friction condition of mechanical seals.
Abstract
Purpose
The purpose of this paper is to investigate the monitoring of the friction condition of mechanical seals.
Design/methodology/approach
Acoustic emission signals from the friction of the seal end face were obtained, and their bispectral characteristics were extracted. The variation of non-Gaussian information with the degree of friction was investigated, and by combining bispectral characteristics with information entropy, a bispectral entropy index was established to represent the friction level of the seal end face.
Findings
In the start-up stage, the characteristic frequency amplitude of the micro-convex body contact is obvious, the friction of the end face is abnormal, the complexity of the system increases in a short time and the bispectral entropy rises continuously in a short time. In the stable operation stage, the characteristic frequency amplitude of the micro-convex body contact varies with the intensity of the seal face friction, the seal face friction is stable and the bispectral entropy fluctuates up and down for a period of time.
Originality/value
The bispectral analysis method is applied to the seal friction monitoring, the seal frequency domain characteristics are extracted, the micro-convex body contact characteristic frequency is defined and the bispectral entropy characteristic index is proposed, which provides a certain theoretical basis for the mechanical seal friction monitoring.
Peer review
The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-07-2023-0242/
Details