Search results

The purpose of this study is to empirically analyse the fiscal revenue implications for oil-dependent African countries in the face of low-carbon energy transition (LET).

The study combined the novel fully modified ordinary least squares, dynamic ordinary least squares and canonical cointegrating regressions estimators to analyse secondary data between 1990 and 2020 for the three major oil-dependent African Countries (Algeria, Angola and Nigeria).

The result shows that LET reduces oil revenue and non-revenue for specific countries (Algeria, Angola and Nigeria) and the panel, suggesting that low-carbon energy transiting is lowering the fiscal revenue of oil-dependent African nations.

The seeming weakness of this study is its inability to broaden the scope to include all oil-producing African economies. However, since the study selected Africa’s top three oil-producing states, the sample can serve as a model for others with lesser crude oil outputs.

Oil-dependent African countries must urgently engage in sincere economic diversification in sectors like industry and manufacturing, the service sector and human capital development to promote economic transformation that will enhance fiscal revenue.

With the pace of energy transition towards low-carbon energy, it is not business as usual for oil-rich African countries (Algeria, Angola and Nigeria) due to fluctuating demand and price. As a result, it becomes worthy to examine how the transition is affecting oil-dependent economies in Africa. Also, this study’s method is unique as it has not been used in a similar study for Africa.

The purpose of this paper is to investigate the performance of bio-based lubricants (BBL), namely, palm mid-olein (PMO) enriched with an antioxidant agent, tertiary-butylhydroquinone (TBHQ) and a viscosity improver, ethylene-vinyl acetate (EVA), in journal bearing (JB) applications.

Samples of the BBL were prepared by blending it with TBHQ and EVA at various blending ratios. The oxidative stability (OS) and viscosity of the BBL samples were examined using differential scanning calorimetry and a viscometer, respectively. Meanwhile, their performance in JB applications was evaluated through the use of a JB test rig with a 0.5 length-to-diameter ratio at various operating conditions.

It was found that the combination of PMO + TBHQ + EVA demonstrated a superior oil film pressure and load-carrying capacity, resulting in a reduced friction coefficient and a smaller attitude angle compared to the use of only PMO or VG68. However, it was observed that the addition of TBHQ and EVA to the PMO did not have a significant impact on the minimum oil film thickness.

The results would be quite useful for researchers generally and designers of bearings in particular.

This study used PMO as the base stock, and its compatibility with TBHQ and EVA was investigated in terms of its OS and viscosity. The performance of this treated BBL was evaluated in a hydrodynamic JB.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-11-2023-0363/

This study aims to understand the current production scenario emphasizing the significance of green manufacturing in achieving economic and environmental sustainability goals to fulfil future needs; to determine the viability of particular strategies and actions performed to increase the process efficiency of electrical discharge machining; and to uphold the values of sustainability in the nonconventional manufacturing sector and to identify future works in this regard.

A thorough analysis of numerous experimental studies and findings is conducted. This prominent nontraditional machining process’s potential machinability and sustainability challenges are discussed, along with the current research to alleviate them. The focus is placed on modifications to the dielectric fluid, choosing affordable substitutes and treating consumable tool electrodes.

Trans-esterified vegetable oils, which are biodegradable and can be used as a substitute for conventional dielectric fluids, provide pollution-free machining with enhanced surface finish and material removal rates. Modifying the dielectric fluid with specific nanomaterials could increase the machining rate and demonstrate a decrease in machining flaws such as micropores, globules and microcracks. Tool electrodes subjected to cryogenic treatment have shown reduced tool metal consumption and downtime for the setup.

The findings suggested eco-friendly machining techniques and optimized control settings that reduce energy consumption, lowering operating expenses and carbon footprints. Using eco-friendly dielectrics, including vegetable oils or biodegradable dielectric fluids, might lessen the adverse effects of the electrical discharge machine operations on the environment. Adopting sustainable practices might enhance a business’s reputation with the public, shareholders and clients because sustainability is becoming increasingly significant across various industries.

A detailed general review of green nontraditional electrical discharge machining process is provided, from high-quality indexed journals. The findings and results contemplated in this review paper can lead the research community to collectively apply it in sustainable techniques to enhance machinability and reduce environmental effects.

Electrical characteristics of transformer oil (TO) have been studied during normal and thermal aging conditions. In this paper, breakdown voltage (BDV), partial discharge (PD), heat transfer results and the physical mechanisms considering the impact of varying the diameter of Al₂O₃ nanoparticles (NPs) have been investigated. Different quantities of the two sizes of Al₂O₃ were added to the oil using a two-step method to determine the positive effect of NPs on the electrical and thermal properties of TO. Finally, the physical mechanisms related to the obtained experimental results have been performed.

The implementation of nanoparticles in this paper was provided by US Research Nanomaterials, Inc., USA. The provided Al₂O₃ NPs have an average particle size of 20–80 nm and a specific surface area of 138 and 58 m²/g, respectively, which have a purity of over 99%. Thermal aging has been done. The IEC 60156 standard has been implemented to calculate the BDV, and a 500-mL volume test cell (Apar TO 1020) has been used. PD test is performed according to Standard IEC 60343, and a JDEVS-PDMA 300 device was used for this test.

BDV tests indicate that 20 nm Al₂O₃ is more effective at improving BDV than 80 nm Al₂O₃, with an improvement of 113% compared to 99% for the latter. The analysis of Weibull probability at BDV indicates that 20 nm Al₂O₃ performs better, with improvements of 141%, 125% and 112% at probabilities of 1, 10 and 50%, respectively. The results of the PD tests using the PDPR pattern also show that 20 nm Al₂O₃ is superior. For the heat transfer test, 0.05 g/L of both diameters were used to ensure fair conditions, and again, the advantage was with 20 nm Al₂O₃ (23% vs 18%).

The effect of Al₂O₃ NP diameter (20 and 80 nm) on various properties of virgin and aged TO has been investigated experimentally in this paper to examine the effect of proposed NP on electrical improvement of TO.

This paper aims to solve the problems molybdenum disulfide (MoS₂) nanosheets suffer from inadequate dispersion stability and form a weak lubricating film on the friction surface, which severely limits their application as lubricant additives.

MoS₂/C₆₀ nanocomposites were prepared by synthesizing molybdenum disulfide (MoS₂) nanosheets on the surface of hydrochloric acid-activated fullerenes (C₆₀) by in situ hydrothermal method. The composition, structure and morphology of MoS₂/C₆₀ nanocomposites were characterized. Through the high-frequency reciprocating tribology test, its potential as a lubricant additive was evaluated.

MoS₂/C₆₀ nanocomposites that were prepared showed good dispersion in dioctyl sebacate (DOS). When 0.5 Wt.% MoS₂/C₆₀ was added, the friction reduction performance and wear resistance improved by 54.5% and 62.7%, respectively.

MoS₂/C₆₀ composite nanoparticles were prepared by in-situ formation of MoS₂ nanosheets on the surface of C₆₀ activated by HCl through hydrothermal method and were used as potential lubricating oil additives.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-10-2023-0321/

Despite the global resolves to curtail fossil fuel consumption (FFC) in favour of clean energies, several countries continue to rely on carbon-intensive sources in meeting their energy demands. Financial constraints and limited knowledge with regards to green energy sources constitute major setbacks to the energy transition process. This study therefore aims to examine the effects of financial development and human capital on energy consumption.

The empirical analysis is based on the system generalised method of moments (SGMM) for a panel of 134 countries from 1996 to 2019. The SGMM estimates conducted on the basis of three measures of energy consumption, notably fossil fuel, renewable energy as well as total energy consumption (TEC), provide divergent results.

While financial development significantly reduces FFC, its effect is positive though non-significant with regards to renewable energy consumption. Conversely, financial development has a positive and significant effect on TEC. Moreover, the results reveal that human capital development has an enhancing though non-significant effect on the energy transition process. In addition, the results reveal that resource rents have an enhancing effect on the energy transition process. However, when natural resources rents are disaggregated into various components (oil, coal, mineral, natural gas and forest rents), the effects on energy transition are divergent. Although our findings are consistent when the global panel is split into developed and developing economies, the results are divergent across geographical regions. Contingent on these findings, actionable policy implications are discussed.

The study complements extant literature by assessing nexuses between financial development, human capital and energy transition from a global perspective.

Despite the huge financial resources associated with oil, Nigeria has consistently recorded poor growth performance. Therefore, this study aims to examine how corruption and oil rent influence Nigeria’s economic performance during the 1996–2021 period.

Various estimation techniques were used. These include the bootstrap autoregressive distributed lag (ARDL) bounds-testing, dynamic ordinary least squares (DOLS), the fully modified OLS (FMOLS) and the canonical cointegration regression (CCR) estimators and the Toda–Yamamoto causality.

The bounds testing results provide evidence of a cointegrating relationship between the variables. In addition, the results of the ARDL, DOLS, CCR and FMOLS estimators demonstrate that oil rent and corruption have a significant positive impact on growth. Further, the results indicate that human capital and financial development enhance economic growth, whereas domestic investment and unemployment rates slow down long-term growth. Additionally, the causality test results illustrate the presence of a one-way causality from oil rent to economic growth and a bi-directional causal relationship between corruption and economic growth.

Existing studies focused on the effects of either oil rent or corruption on growth in Nigeria. Little attention has been paid to the exploration of how the rent from oil and the pervasiveness of corruption contribute to the performance of the Nigerian economy. Based on the outcome of this study, strategies and policies geared towards reducing oil dependence and the pervasiveness of corruption, enhancing human capital and financial development and reducing unemployment are recommended.

The study aims to determine the the optimal value of output parameters of a variable compression ratio (CR) diesel engine are investigated at different loads, CR and fuel modes of operation experimentally. The output parameters of a variable compression ratio (CR) diesel engine are investigated at different loads, CR and fuel modes of operation experimentally. The performance parameters like brake thermal efficiency (BTE) and brake specific energy consumption (BSEC), whereas CO emission, HC emission, CO₂ emission, NO_x emission, exhaust gas temperature (EGT) and opacity are the emission parameters measured during the test. Tests are conducted for 2, 6 and 10 kg of load, 16.5 and 17.5 of CR.

In this investigation, the first engine was fueled with 100% diesel and 100% Calophyllum inophyllum oil in single-fuel mode. Then Calophyllum inophyllum oil with producer gas was fed to the engine. Calophyllum inophyllum oil offers lower BTE, CO and HC emissions, opacity and higher EGT, BSEC, CO₂ emission and NO_x emissions compared to diesel fuel in both fuel modes of operation observed. The performance optimization using the Taguchi approach is carried out to determine the optimal input parameters for maximum performance and minimum emissions for the test engine. The optimized value of the input parameters is then fed into the prediction techniques, such as the artificial neural network (ANN).

From multiple response optimization, the minimum emissions of 0.58% of CO, 42% of HC, 191 ppm NO_x and maximum BTE of 21.56% for 16.5 CR, 10 kg load and dual fuel mode of operation are determined. Based on generated errors, the ANN is also ranked for precision. The proposed ANN model provides better prediction with minimum experimental data sets. The values of the R² correlation coefficient are 1, 0.95552, 0.94367 and 0.97789 for training, validation, testing and all, respectively. The said biodiesel may be used as a substitute for conventional diesel fuel.

The blend of Calophyllum inophyllum oil-producer gas is used to run the diesel engine. Performance and emission analysis has been carried out, compared, optimized and validated.

The growing awareness of climate risks associated with food safety issues has drawn the attention of stakeholders urging the food industry to carry out a sustainable food safety management system (FSMS). This study aims to investigate whether the critical success factors (CSFs) of sustainable FSMS can contribute to achieving climate neutrality, and how the adoption of FSMS 4.0 supported by the Industry Revolution 4.0 (IR 4.0) technologies moderates the impact of the CSFs on achieving climate neutrality.

Survey data from 255 food production firms in China and Vietnam were utilised for the empirical analysis. The research hypotheses were examined using structural equations modelling (SEM) with route analysis and bootstrapping techniques.

The results show that top management support, human resource management, infrastructure and integration appear as the significant CSFs that directly impact food production firms in achieving climate neutrality. Moreover, the results demonstrate that the adoption of FSMS 4.0 integrated with the three components (ecosystems, quality standards and robustness) significantly moderates the impact of the CSFs on achieving climate neutrality with lower inputs in human resources, infrastructure investment, integration and external assistance, and higher inputs in strengthening food safety administration.

This study provides empirical findings that fill the research gap in understanding the relationship between climate neutrality and the CSFs of sustainable FSMS while considering the moderating effects of the FSMS 4.0 components. The results provide theoretical and practical insights into how the food production sector can utilise IR 4.0 to attain sustainable FSMS for achieving climate neutrality.

The efforts of researchers in the 21st century have been devoted to developing novel approaches to leave planet earth green for future generations. This study aims to report the synthesis of microcapsules from natural essential peppermint oil and their application to a bleached polyester and cotton (PC) blended fabric.

Microcapsules were prepared by a complex coacervation process and applied through the conventional pad-dry-cure method. The liquid suspension of the microcapsules was examined by optical microscopy to investigate the surface morphology of the microcapsules. Scanning electron microscopy was used to examine the surface morphology of the fabric after the application of the microcapsules. The finished fabric was checked for its mosquito repellent activity at the lab scale using a standard test protocol (cage test) by inserting a human arm and hand enfolded with microcapsules treated fabric.

PC fabric treated with 6% microencapsulated peppermint oil at zero wash showed 95.3% repellency against mosquitoes, and after 30 washes, the repellency was 85.8% which confirmed the durability of the developed finished fabric. The finished samples exhibited excellent air permeabilities and absorbencies.

This study successfully developed peppermint oil microencapsulated fabric with excellent efficacy against three mosquito species.