Search results

In the present scenario of high-speed machines, the use of non-circular hole-entry bearing configuration, i.e. two-lobe, multi-lobe, lemon bore, etc., has becomes unavoidable, as the journal bearings with non-circular configurations provide better stability at high operating speed and heavy dynamic loading. Further, this research aims to show that the presence of micro particles in the lubricants greatly affects performance of the bearings, as their presence leads to non-Newtonian behaviors of the lubricant. Therefore, to consider the effect of these micro particles, the lubricant is modeled as a micropolar lubricant. The present work analyzes the effect of these micropolar lubricants on the performance of hole-entry circular and non-circular (two-lobe) hybrid journal bearings compensated with constant flow valve restrictor and compares with that of Newtonian lubricants.

The modified Reynolds equation governing the laminar flow of iso-viscous, incompressible micropolar lubricant in the clearance space of a journal bearing system has been solved using finite element method and appropriate boundary conditions. Further, a comparative analysis between circular and non-circular (two-lobe) hybrid journal bearing compensated with constant flow valve restrictor operating with Newtonian and micropolar lubricant has been presented.

The numerically simulated results reveal that the non-circular bearing configuration provides better performance vis-à-vis the circular bearing configuration. Further, the increase in the micropolar effect of the lubricant enhances the performance of circular and the non-circular bearing configurations compared with the Newtonian lubricant. Also, in the case of the non-circular bearing configuration with an offset factor (δ = 1.5), the bearing performance improved compared with (δ = 1.25).

Many research studies have been done in the area of non-circular hybrid journal bearing with Newtonian lubricants with different types of restrictors, but the non-circular hole-entry constant flow valve-compensated hybrid journal bearing operating with the micropolar lubricant has not been analyzed. Therefore, in the present work, an effort has been made to fill this research gap.

The aim of the present paper is to study the combined influence of textured surface and micropolar lubricant behaviour on the performance of two-lobe hole-entry hybrid journal bearing system. The bearing performance parameters of the textured circular/two-lobe hole-entry hybrid journal bearing system have been computed against the constant vertical external load supported by the bearing.

In this work, Eringen’s micropolar fluid theory has been used to derive the governing Reynolds equation. The consequent solution of the governing Reynolds equation has been obtained by using finite element method (FEM) numerical technique.

The present study indicates that the use of the textured surface, two-lobe profile of bearing and micropolar lubricant, significantly enhances the bearing performance as compared to non-textured circular journal bearing.

The present study concerning the influence of surface texturing on the behaviour of the two-lobe hole-entry hybrid journal bearing lubricated with micropolar lubricant is original. The theoretically simulated results of the present study will be useful to design an efficient journal bearing system.

The paper seeks to study, theoretically, the performance characteristics of capillary compensated multi‐recessed hydrostatic journal bearings operating with micropolar lubricant. The finite element method is used to solve the modified Reynolds' equation governing the micropolar lubricant flow in the clearance space of a hydrostatic journal bearing. The performance characteristics of bearing operating with micropolar lubricant are presented and compared with that of Newtonian lubricant, for a wide range of non‐dimensional load, capillary restrictor design parameter and micropolar parameters.

The modified Reynolds' equation governing the flow of the micropolar lubricant is solved along with restrictor flow equation by finite element method so as to obtain fluid‐film pressures. The iterative procedure is repeated until the converged solution for the fluid‐film pressure field is obtained.

A study of four‐pocket hydrostatic journal bearing system capillary compensated and operating with micropolar lubricant is presented. The following conclusions are made from the results presented in this study: at a constant load, pocket pressures and minimum film thickness, stiffness coefficients and, the damping coefficients increase with increase in micropolar effect of lubricant as compared to the Newtonian lubricant; the influence of the micropolar parameters of lubricant is more significant upon the minimum fluid‐film thickness at higher values of load and lower values of restrictor design parameter; the non‐dimensional flow decreases with increase in the micropolar effect of the lubricant a given values of restrictor design parameter and load; and the stiffness coefficient in the direction of load is found to be influenced by the micropolar parameters and more significantly at lower values of restrictor design parameter and load.

Studies of capillary compensated multi‐recess hydrostatic journal bearing operating with micropolar fluid/lubricant are not available in the existing literature to the best of authors' knowledge. Although, such bearing has been studied with Newtonian lubricant and available in open literature. Therefore, this paper is an original piece of work in the area of micropolar lubrication and compensated hydrostatic bearings.

The purpose of this study is to examine the thermo-hydrodynamic performance of tilted non-circular journal bearings lubricated with a micropolar fluid. The investigated bearing types are two- and three-lobe journal bearings with finite length.

For this purpose, modified Reynolds, energy and three-dimensional Laplace equations are solved numerically by using generalized differential quadrature method. The effects of micropolarity characteristics of lubricants, such as characteristic length and coupling number, as well as tilt angle as a design parameter, on the performance of non-circular two- and three-lobe journal bearings are studied.

The results show that the tilt angle can affect the temperature and pressure profiles causing variation in the performance of non-circular bearings. Increasing coupling number and decreasing characteristic length cause the load-carrying capacity to decrease because of the increase in maximum oil temperature of the fluid film of lubricant and decrease in the minimum oil base viscosity. So, it is possible to select suitable values of tilt angle for achieving optimum performance of these bearings.

The non-circular bearings suggest several design parameters such as tilt angle for designers. By considering thermal effects for micropolar lubricant, the requirements of a specific application can be fulfilled.

The purpose of this paper is to study tilt angle effects as design parameters of noncircular bearings, on the linear dynamic analyses of micropolar lubricated circular, two, three and four lobe journal bearings.

Reynolds equation in dynamic state is modified considering the micropolarity characteristics of lubricant, and it is solved using generalized differential quadrature method. The perturbed components of the dynamic pressure are extracted based on the linear dynamic model. To explain the transient state of the governing equation, through the linear dynamic approach, the whirling motion of rotor around the steady state position is assumed to be harmonic.

It is observed from the results that tilt angle has significant effects on the steady state and stability performance of lobed journal bearings. It may be selected suitably to improve the performance of rotor-bearing system, while all other lubricant properties and noncircular bearing design parameters are kept fixed. Results show that among the three types of bearings considered, the dynamic performance of two lobe bearings are more affected by the variation of tilt angle.

The present study is mainly concerned with the effects of tilt angle as a design parameter on the stability performance of a hydrodynamic noncircular journal bearing lubricated with micropolar fluid.

The purpose of this paper is to investigate the effect of turbulence on the stability characteristics of finite hydrodynamic journal bearing lubricated with micropolar fluid.

The non-dimensional transient Reynolds equation has been solved to obtain the non-dimensional pressure field which in turn used to obtain the load carrying capacity of the bearing. The second-order equations of motion applicable for journal bearing system have been solved using fourth-order Runge–Kutta method to obtain the stability characteristics.

It has been observed that turbulence has adverse effect on stability and the whirl ratio at laminar flow condition has the lowest value.

The paper provides the stability characteristics of the finite journal bearing lubricated with micropolar fluid operating in turbulent regime which is very common in practical applications.

Non-linear stability analysis of micropolar fluid lubricated journal bearing operating in turbulent regime has not been reported in literatures so far. This paper is an effort to address the problem of non-linear stability of journal bearings under micropolar lubrication with turbulent effect. The results obtained provide useful information for designing the journal bearing system for high speed applications.

The performance of finite circular journal bearing lubricated with micropolar fluids taking into account the elastic deformation of the bearing liner is presented. The paper aims to discuss these issues.

The modified Reynolds equation is obtained using the micropolar lubrication theory. The solution of the modified Reynolds equation is determined using finite difference technique. The static characteristics in terms of load-carrying capacity, attitude angle, side leakage and friction coefficient for micropolar and Newtonian fluids are determined for various values of eccentricity ratio and different values of elastic coefficient.

Compared with Newtonian fluids, the micropolar fluids produce an increase in the load-carrying capacity and a reduction in the attitude angle, the friction factor and side leakage for both the rigid and deformable bearings.

It is concluded that the influence of elastic deformation on the bearing characteristics lubricated with micropolar fluids is significantly apparent compared with bearing lubricated with Newtonian fluids.

The purpose of this paper is to analyse the static performance characteristics of lobe journal bearings lubricated with a micropolar fluid, considering effect of non‐circularity. Number of lobes and their preload value are the non‐circularity parameters considered in the present study. The bearings undertaken for the investigation are two, three and four‐lobe symmetric journal bearings with finite width.

For this purpose, modified form of Reynolds equation is derived, based on Eringen's micropolar fluid theory and it is solved numerically using finite element method (FEM). The effect of the non‐circularity parameters of bearings on the steady‐state performance characteristics such as load carrying capacity, attitude angle, coefficient of friction and side leakage flow are presented and discussed.

The results show that the number of lobes and their preload value can influence the performance of lobe bearings. It is seen that, in order to provide certain improvement over simple cylindrical bearings, the non‐circularity parameters of lobe bearings must be chosen correctly. There is no single optimum profile for multi‐lobe bearing application.

Lobe bearings, compared with simple circular bearings, offer several geometric parameters to designers. These parameters must be chosen correctly, so that the requirements of a specific application can be fulfilled.

Hybrid journal bearing have long been used in machines requiring large load and high speed capacity operating under wide range of temperatures. Different compensating devices are used in for efficient operation of bearings. This paper aims to help in selection of optimum compensating device by evaluating the comparative performance of constant flow valve, capillary compensated and slot entry hybrid journal bearing under the combined influence of thermal effects and micropolar nature of lubricant.

The variation in micropolar parameters and viscosity change due to temperature increase of lubricant are considered in present study. Finite element method is used for combined iterative solution of micropolar Reynolds, energy and conduction equations. Micropolar lubricant is assumed to be governed by two parameters, coupling number and characteristic length. The results in the study are presented for symmetric and asymmetric configurations of hole entry and slot entry non-recessed hybrid journal bearings

The results indicate that constant flow valve compensated hole entry hybrid journal bearing is the highest performing bearing for the given range of micropolar parameters of lubricant in terms of maximum fluid pressure and dynamic coefficients.

The performance variations of various configurations of hybrid journal bearing are presented in a single paper. The reader can get overview of combined effects of micropolar parameters and viscosity decrease due to temperature increase of the lubricant.

The purpose of this research is to study the dynamic behavior of hydrostatic squeeze film dampers made of four hydrostatic pads, fed through four capillary restrictors with micropolar lubricant.

The modified version of Reynolds equation is solved numerically by the finite differences and the Gauss–Seidel methods to determine the pressure field generated on the hydrostatic bearing flat pads. In the first step, the effects of the pad dimension ratios on the stiffness and damping coefficients are investigated. In the second step, the damping factor is evaluated with respect to the micropolar properties.

The analysis revealed that the hydrostatic squeeze film dampers lubricated with micropolar lubricants produces the maximum damping factor for characteristic length of micropolar lubricant less than 5, while the same bearing operating with Newtonian lubricants reaches its maximum damping factor at eccentricity ratios larger than 0.4.

The results obtained show that the effects of micropolar lubricants on the dynamic performances are predominantly affected by the pad geometry and eccentricity ratio.