Search results

Titanium(IV) oxide nanoparticles (TiO₂ NP) were deposited to cotton denim fabrics using a self-crosslinking acrylate – a polymer dispersion to extend the lifetime of the products. This study aims to determine the optimum conditions to increase abrasion resistance, to provide self-cleaning properties of denim fabrics and to examine the effects of these applications on other physical properties.

The denim samples were first treated with nonionic surfactant to increase their wettability. Three different amounts of the polymer dispersion and two different pH levels were selected for the experimental design. The finishing process was applied to the fabrics with pad-dry-cure method.

The presence of the coatings and the adhesion of TiO₂ NPs to the surfaces were confirmed by scanning electron microscope and Fourier transform infrared spectroscopy analysis. It was ascertained that the most appropriate self-crosslinking acrylate amount and ambient pH level is 10 mL and “2”, respectively, for providing increased abrasion resistance (2,78%) and enhanced self-cleaning properties (363,4%) in the denim samples. The coating reduced the air permeability and softness of the denim samples. Differential scanning calorimetry and thermogravimetry analysis results showed that the treatments increased the crystallization temperatures and melting enthalpy values of the denim samples. Based on the thermal test results, it is clear that mass loss of the denim samples at 370°C decreased as the amount of self-crosslinking acrylate increased (at pH 3).

This study helped us to find out optimum amount of self-crosslinking acrylate and proper pH level for enhanced self-cleaning and abrasion strength on denim fabrics. With this finishing process, an environmentally friendly and long-life denim fabric was designed.

The purpose of this study is to improve the mechanical property and processing performance and reduce the cost of the polylacticacid/polybutyleneadipate-co-terephthalate(PLA/PBAT) composites, the calcium carbonate (CaCO₃) and compatibilizer styrene-maleicanhydride copolymer (SMA-2025) were added to the PLA/PBAT system, and the effect of CaCO₃ and SMA-2025 on the morphology, structure, mechanical property, thermal property, thermalstability and shape memory property of the CaCO₃/PLA/PBAT composites were studied and discussed.

The CaCO₃/PLA/PBAT shape memory composites were prepared via melt-blending and hot-pressing methods, and the effect of CaCO₃ and SMA-2025 on the property of the composites was investigated via scanning electron microscope, universal testing instrument, Fourier transform infrared spectroscopy, differential scanning calorimetry, thermogravimetric analysis and DMA, respectively.

The interface property, mechanical property, thermal stability, shape memory recovery ratios and recovery stresses, and processing performance of the CaCO₃/PLA/PBAT shape memory composites were significantly improved by adding of CaCO₃ and SMA-2025. Moreover, the CaCO₃/PLA/PBAT composites have good blowing film processing performance.

This study will provide a reference for the research, processing and application of the high-performance CaCO₃/PLA/PBAT shape memory composites.

Gourd fibres (GF) are a natural biodegradable fibre material with excellent mechanical properties and high tensile strength. The use of natural fibres in composite materials has gained popularity in recent years due to their various advantages, including renewability, low cost, low density and biodegradability. Gourd fibre is one such natural fibre that has been identified as a potential reinforcement material for composites. However, it has low surface energy and hydrophobic nature, which makes it difficult to bond with matrix materials such as polyester. To overcome this problem, chemically adapted gourd fibre has been proposed as a solution. Chemical treatment is one of the most widely used methods to improve the properties of natural fibres. This research evaluates the feasibility and effectiveness of incorporating chemically adapted gourd fibre into polyester composites for industrial fabrication. The purpose of this study is to examine the application of chemically modified GF in the production of polyester composite engineering materials.

This work aims to evaluate the effectiveness of chemically adapted gourd fibre in improving the adhesion of gourd fibre with polyester resin in composite fabrication by varying the GF from 5 to 20 wt.%. The study involves the preparation of chemically treated gourd fibre through surface modification using sodium hydroxide (NaOH), permanganate (KMnO₄) and acetic acid (CH₃COOH) coupling agents. The mechanical properties of the modified fibre and composites were investigated. It was then characterized using scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR) to determine the changes in surface morphology and functional groups.

FTIR characterization showed that NaOH treatment caused cellulose depolymerization and caused a significant increase in the hydroxyl and carboxyl groups, showing improved surface functional groups; KMnO₄ treatment oxidized the fibre surface and caused the formation of surface oxide groups; and acetic acid treatment induced changes that primarily affected the ester and hydroxyl groups. SEM study showed that NaOH treatment changed the surface morphology of the gourd fibre, introduced voids and reduced hydrophilic tendencies. The tensile strength of the modified gourd fibres increased progressively as the concentration of the modification chemicals increased compared to the untreated fibres.

This work presents the designed composite with density, mechanical properties and microstructure, showing remarkable improvements in the engineering properties. An 181.5% improvement in tensile strength and a 56.63% increase in flexural strength were got over that of the unreinforced polyester. The findings from this work will contribute to the understanding of the potential of chemically adapted gourd fibre as a reinforcement material for composites and provide insights into the development of sustainable composite materials.

This study aims to evaluate the thermal performance of sodium alginate (SA) aerogel attached to nano SiO₂ and its radiative cooling effect on firefighting clothing without environmental pollution.

SA/SiO₂ aerogel with refractory heat insulation and enhanced radiative cooling performance was fabricated by freeze-drying method, which can be used in firefighting clothing. The microstructure, chemical composition, thermal stability, and thermal emissivity were analyzed using Fourier transform infrared spectroscopy, scanning electron microscopy, thermogravimetric analyzer and infrared emissivity measurement instrument. The radiative cooling effect of aerogel was studied using thermal infrared imager and thermocouple.

When the addition of SiO₂ is 25% of SA, the prepared aerogel has excellent heat insulation and a high radiative cooling effect. Under a clear sky, the temperature of SA/SiO₂ aerogel is 9.4°C lower than that of pure SA aerogel and 22.1°C lower than that of the simulated environment. In addition, aerogel has more exceptional heat insulation effect than other common fabrics in the heat insulation performance test.

SA/SiO₂ aerogel has passive radiative cooling function, which can efficaciously economize global energy, and it is paramount to environment-friendly cooling.

This method could pave the way for high-performance cooling materials designed for firefighting clothing to keep maintain the wearing comfort of firefighters.

SA/SiO₂ aerogel used in firefighting clothing can release heat to the low-temperature outer space in the form of thermal radiation to achieve its own cooling purpose, without additional energy supply.

This study aims to comparatively reveal the physical, thermal and mechanical properties of horse tail and mane hairs, which have the potential to be used in many areas.

Physical properties of horsehairs such as diameter, density, moisture and water absorption were measured. Fourier transform infrared, field emission scanning electron microscopy and amino acid analyzes were applied to the hairs. Thermal stability of horsehair was investigated by thermogravimetric analysis and differential scanning calorimetry analysis. In addition, breaking strength and elongation values of mane and tail hairs were measured.

As a result of morphological analysis of horsehair, it was observed that there are usually gaps in the internal structure of horsehair, but the size and continuity of these gaps vary. It has been determined that there is a significant difference between the tenacity values of tail and mane hairs as well as geometric characteristics. In addition, amino acid analysis has shown that the amino acid contents of horse tail and mane hairs are similar and not much different from sheep’s wool.

Horsehair has been used for various purposes such as clothing, accessories, brushes, upholstery and reinforcement material. To use horsehair in accordance with its application area and performance characteristics, it is necessary to know its physical, thermal and mechanical properties. It is considerable to reveal the similar and different aspects of tail and mane hairs to determine whether they are alternatives to each other. Therefore, revealing the characteristics of tail and mane hairs comparatively constitutes the originality of this study.

The purpose of this study is the development of sustainable and low-formaldehyde emission wood adhesive formulations.

Three-step urea formaldehyde (UF) resin has been in situ modified with calcium lignosulfonate (LS) and/or 1,4 butanediol diglycidyl ether (GE). The structural, chemical, thermal and morphological characterizations were carried out on resin samples. These resins have been applied for particleboard pressing, and UF, UF-LS and UF-GE were evaluated as P2 classes according to EN 312.

The results show that the improved LS- or diglycidyl ether-modified UF wood adhesives were successful in their adhesive capacity, and the formaldehyde content of the final product was obtained as low as 8 mg/100 g. This paper highlights that the presented adhesive formulations could be a potential eco-friendly and cost-effective alternative to formaldehyde-based wood adhesives for interior particleboard production.

Combination of LS and GE resulted in weaker mechanical properties and fulfilled P1 class particleboards due to temperature and duration conditions. Therefore, in situ usage of LS or GE in UF resins is highly recommended for particleboard pressing. Formaldehyde content of particleboards was determined with the perforator method according to EN 12460-5 and all of the particleboards exhibited E1 class. LS was more efficient in decreasing formaldehyde content than GE.

This study provides the application of particleboards with low formaldehyde emission.

The developed LS- and diglycidyl ether-modified UF resins made it possible to obtain boards with significantly low formaldehyde content compared with commercial resins.

The developed formaldehyde-based resin formulation made it possible to produce laboratory-scale board prototypes using LS or GE without sacrificing of press factors and panel quality.

This study aims to develop a green, economical and efficient ultrasonic-/microwave assisted extraction (UMAE) process for the extraction of anthocyanins.

After optimizing the extraction conditions by response surface methodology, three assays including DPPH, ABTS·+, FRAP were applied to analyze the antioxidant activity of the extracted anthocyanins. The stability under different temperatures, reductant concentrations and pHs was also discussed. The components of anthocyanins in blueberry were analyzed by HPLC-QTOF-MS2.

The optimal extraction parameters were ultrasonic power of 300 W, microwave power of 365.28 W and solid–liquid ratio of 30 (g/mL). The possible structures can be speculated as Delphinidin-3-O-galactoside, Delphinidin, Petunidin, Delphinidin-3-O-glucoside, Petunidin-3-O-glucoside, Cyanidin-3-O-glucoside. The results demonstrated that the UMAE can improve the yield of anthocyanins in shorter extraction time with higher activity.

The present study may provide a promising and feasible route for extracting anthocyanins from blueberries and studying their physicochemical properties, ultimately promoting the utilization of blueberry anthocyanins.

The health and environmental hazards associated with synthetic dyes have led to a revival of natural dyes that are non-toxic, environmentally benign and coupled with various functions. The study aims to investigate and develop the potentiality of a popular herb called Chromolaena odorata (C. odorata) as a sustainable and stable dyestuff in textiles.

Natural colorant extracted from C. odorata leaves is used to dye the worsted fabric, which is one of the premier end-use of wool in fashion, via the padding method associated with pre-, simultaneous and post-mordanting with chitosan, tannic acid and copper sulfate pentahydrate. The effects of extraction, dyeing and mordanting processes on fabric’s color strength K/S and color difference ΔE_CMC are investigated via International Commission on Illumination’s L*a*b* color space, Fourier transform infrared spectroscopy, scanning electron microscope, color fastness to washing, rubbing, perspiration and light.

The results obtained indicate extraction with ethanol 90% with a solid/liquid ratio of 1:5 within 1 h, and coloration with a liquor ratio of 1:5 (pH 5) within 2 h under padding pressure of 0.3 MPa are the most effective for coloring worsted fabric.

The C. odorata’s application as a highly effective dyestuff possessing good colorimetric effectiveness has expanded this herb's economic potential, contributing partly to economic growth and adding value to wool in global supply chain.

C. odorata dyestuff has prevailed over other natural colorants because of its impressive color fastness against washing, rubbing, perspiration and especially color stability for pH change.

Intumescent coatings are nowadays a dominant passive system used to protect structural materials in case of fire. Due to their reactive swelling behaviour, intumescent coatings are particularly complex materials to be modelled and predicted, which can be extremely useful especially for performance-based fire safety designs. In addition, many parameters influence their performance, and this challenges the definition and quantification of their material properties. Several approaches and models of various complexities are proposed in the literature, and they are reviewed and analysed in a critical literature review.

Analytical, finite-difference and finite-element methods for modelling intumescent coatings are compared, followed by the definition and quantification of the main physical, thermal, and optical properties of intumescent coatings: swelled thickness, thermal conductivity and resistance, density, specific heat capacity, and emissivity/absorptivity.

The study highlights the scarce consideration of key influencing factors on the material properties, and the tendency to simplify the problem into effective thermo-physical properties, such as effective thermal conductivity. As a conclusion, the literature review underlines the lack of homogenisation of modelling approaches and material properties, as well as the need for a universal modelling method that can generally simulate the performance of intumescent coatings, combine the large amount of published experimental data, and reliably produce fire-safe performance-based designs.

Due to their limited applicability, high complexity and little comparability, the presented literature review does not focus on analysing and comparing different multi-component models, constituted of many model-specific input parameters. On the contrary, the presented literature review compares various approaches, models and thermo-physical properties which primarily focusses on solving the heat transfer problem through swelling intumescent systems.

The presented literature review analyses and discusses the various modelling approaches to describe and predict the behaviour of swelling intumescent coatings as fire protection for structural materials. Due to the vast variety of available commercial products and potential testing conditions, these data are rarely compared and combined to achieve an overall understanding on the response of intumescent coatings as fire protection measure. The study highlights the lack of information and homogenisation of various modelling approaches, and it underlines the research needs about several aspects related to the intumescent coating behaviour modelling, also providing some useful suggestions for future studies.