Search results

The purpose of this study is to investigate the application of non-destructive testing methods in measuring bearing oil film thickness to ensure that bearings are in a normal lubrication state. The oil film thickness is a crucial parameter reflecting the lubrication status of bearings, directly influencing the operational state of bearing transmission systems. However, it is challenging to accurately measure the oil film thickness under traditional disassembly conditions due to factors such as bearing structure and working conditions. Therefore, there is an urgent need for a nondestructive testing method to measure the oil film thickness and its status.

This paper introduces methods for optically, electrically and acoustically measuring the oil film thickness and status of bearings. It discusses the adaptability and measurement accuracy of different bearing oil film measurement methods and the impact of varying measurement conditions on accuracy. In addition, it compares the application scenarios of other techniques and the influence of the environment on detection results.

Ultrasonic measurement stands out due to its widespread adaptability, making it suitable for oil film thickness detection in various states and monitoring continuous changes in oil film thickness. Different methods can be selected depending on the measurement environment to compensate for measurement accuracy and enhance detection effectiveness.

This paper reviews the basic principles and latest applications of optical, electrical and acoustic measurement of oil film thickness and status. It analyzes applicable measurement methods for oil film under different conditions. It discusses the future trends of detection methods, providing possible solutions for bearing oil film thickness detection in complex engineering environments.

The purpose of this paper is to increase the measurement accuracy of assembly deviations of an inertial navigation system, a new evaluation and optimal method of assembly metrology system is proposed, which takes into account the uncertainty from laser tracker hardware and coordinate system transformation, and is based on the Monte Carlo method.

The uncertainty model of the laser tracker is established and its parameters are obtained from the known repeated test data by kriging interpolation and the least squares method. The errors of coordinate transformation are reduced by using a weighted point matching method, and the uncertainty of the transformation parameters is obtained based on the generalized inverse theory. The weighting coefficients of each reference point are optimized by the particle swarm optimization method according to the assembly requirements.

The experiment results show that measurement error and predicted results match well, and the assembly deviation uncertainty of large component is reduced by about 10 per cent compared with the singular value decomposition method.

This paper proposes a method to evaluate and eliminate the influence of random errors of the laser tracker during evaluation process of coordinate translation parameters and assembly deviations. The proposed method would be useful to improve the assembly measurement accuracy through less measurement times.

The measurement of aircraft barycenter is a verification of theoretical barycenter and is an important step of aircraft development. In the traditional measurement method of aircraft barycenter, the posture of the aircraft needs to be adjusted manually and is measured by optical instruments. The efficiency of posture adjustment depends on the proficiency of workers, and the accuracy of measurement is not high. In view of these problems of the current barycenter measurement method, this paper aims to propose an aircraft barycenter measurement method based on multi-posture.

In this method, the numerical control locator is used as a supporting part to fix and adjust the aircraft, and the calculation model of aircraft barycenter is established according to the principle of rigid body rotation and the principle of moment balance. Then, the influence of the main error sources on the measurement accuracy of aircraft barycenter is analyzed by Monte Carlo simulation, and the measurement accuracy is compared with that of the barycenter measurement method based on horizontal posture. Finally, the experiment platform of barycenter measurement was built in the laboratory and the experiments were carried out.

The experimental results show that the barycenter measurement method proposed in this paper has obvious advantages in measurement accuracy and efficiency compared with the traditional method.

This method can be used to measure the barycenter of different types of aircraft quickly and automatically.

The purpose of this paper shows the effect of hot and humid weather conditions (HHWCs) on workers that has resulted in considerable loss in the construction industry, especially during the hottest periods due to decline in worker productivity (WP). Until the last few decades, there is very limited research on construction WP in HHWCs. Nevertheless, these studies have sparked interests on seeking for the most appropriate methods to assess the impact of HHWCs on construction workers.

This paper begins by reviewing the current measuring methods on WP in HHWCs, follows by presenting the potential impact of HHWCs on WP. The paper highlights the methodological deficiencies, which consequently provides a platform for scholars and practitioners to direct future research to resolve the significant productivity loss due to global warming. This paper highlights the need to identify the limitations and advantages of the current methods to formulate a framework of new approaches to measure the WP in HHWCs.

Results show that the methods used in providing real-time response on the effects of HHWCs on WP in construction at project, task and crew levels are limited. An integration of nonintrusive real-time monitoring system and local weather measurement with real-time data synchronisation and analysis is required to produce suitable information to determine worker health- and safety-related decisions in HHWCs.

The comprehensive literature review makes an original contribution to WP measurements filed in HHWCs in the construction industry. Results of this review provide researchers and practitioners with an insight into challenges associated with the measurements methods and solving practical site measurements issues. The findings will also enable the researchers and practitioners to bridge the identified research gaps in this research field and enhance the ability to provide accurate measures in HHWCs. The proposed research framework may promote potential improvements in the productivity measurements methods, which support researchers and practitioners in developing new innovative methods in HHWCs with the integration of the most recent monitoring technologies.

There is currently a wide range of methods for measuring social impact. Each method uses specific indicators, mainly because of the diverse characteristics of social enterprises (SEs) and the type of impact that is analysed, thus hindering the definition of a single, shared measurement system and, at the same time, prompting the proliferation of countless alternative methods. Many enterprises experience difficulties in selecting the best method to carry out the measurement process correctly. The purpose of this paper is to contribute to filling in conceptual gaps inherent to measuring impact and value creating in the domain of social entrepreneurship (SE), as well as equipping the social entrepreneur with better knowledge of the methodologies available for measuring impact and supporting their decision-making process.

The aims of this paper are, therefore, threefold: to identify the common conditions of how to measure social impact (literature); to analyse how measurement is actually undertaken in practice (process); and to compare the four main methodologies, among the numerous ones, that have been developed to measure the impact generated by SEs so far (methods and comparison). The authors compared four of the most commonly used methodologies in the field of social impact measurement, analysing advantages, disadvantages and application fields. They evaluated whether a method can be considered preferable to others in each case.

The paper demonstrated the high fragmentation that characterised the existing literature concerning the measurement of social impact and the wide range of methodologies used, thus leading to a great confusion in regard to the selection of the most appropriate methodology for the pursuit of one's own ends. This often discourages the undertaking of the measurement process. The analysis used in this paper leads us to conclude that the social return on investment method is more popular than the other three alternatives.

There are significant deficiencies in methodologies adopted, and researchers must use innovative, situated approaches that fit with the SE literature. The authors concluded that for the future, there is a need to do a SLR in a disciplined way. Further research is strongly recommended in this area, to provide more comparative studies of existing methods. It is hoped that enterprises can be directed towards using a limited range of formal methods that can capture the diversity of the various application cases, thus making it possible to compare different situations: a limited range of formal methods that can capture the diversity of the SEs considered and the impacts generated will be promoted.

The authors also want to analyse how the SEs concretely realise the measurement of their impact that often do not use the formal methodologies presented in the literature but rather tools created by the ad hoc companies on the basis of their specific needs.

This paper makes a theoretical contribution to the literature of the theory on social value within the SE field by having regard to how to measure social impact. It partially responds to Choi and Majumdar’s (2014) and Hlady-Rispal and Servantie’s (2016) calls for the development of a theory of measuring social value.

The purpose of this paper is to investigate a possibility of determination of the rivet hole expansion with the use of computed tomography (CT). This method offers several benefits in comparison to the traditionally used destructive methods.

The measurements of rivet hole expansion were performed on three specimens with the use of CT. Then, the same specimens were measured with the use of the conventional destructive method. This allows to estimate accuracy of the proposed method and characterize its advantages and limitations.

Good correlation with the destructive method has been obtained. The proposed method enables more detailed analysis of a joint as arbitrarily oriented cross-section for analysed area can be easily generated and increase of measurements number is always possible and simple. The disadvantage of the method is lower accuracy of diameter determination than in the case of conventional methods.

The measurements were performed only on one type of specimens. Probably, if a rivet and sheets were made of the same alloy, the measurements would be barely possible. The rivets were installed with squeezing ratio D/Do = 1.7 whose value is close to maximum as defined in riveting instructions (Kaniowski, 2015). This means that measured hole expansions were higher than in typical joint. The proposed method is appropriate for simple specimens (one rivet at a specimen width).

The investigation shows that rivet hole expansion can be measured with the use of CT. This method is useful especially when destruction of a specimen is not allowed or more detailed analysis is required (e.g. measurements on many depth levels).

The paper presents measurements of rivet hole expansion with the method which has not been used before for this application. Advantages and limitations of the proposed approach compared to conventional methods are discussed.

The purpose of this paper is to present coordinate measuring system possibilities in the meaning of the geometric accuracy assessment of hot zone elements in aircraft engines. The aim of the paper is to prove that this method, which uses blue light and is most sufficient and cost-saving method, can to be used in the production line for serial manufacturing of elements, for which a high level of accuracy is required.

The analysis of the geometric accuracy of the blades was performed using non-contact optical coordinate scanner ATOS Triple Scan II Blue Light, manufactured by GOM Company, at the Department of Mechanical Engineering, Rzeszów University of Technology. Geometric analysis was conducted for blades manufactured from different waxes (A7Fr/60 and RealWax VisiJet CPX200), thus comparing injection technique and rapid prototyping (RP) method, and for casting made of Inconel 713C nickel-based superalloy.

The analysis of the criteria for the method of blades’ measuring selection showed that the chosen system successfully met all criteria for the verification of blades’ geometry at the selected stages of the process. ATOS II optical scanner with blue light technology allows measurement almost regardless of daylight or artificial (white) light. This allows the application of the measurement system in the production cycle, thus eliminating the need to create special conditions for measurements.

Requirements related to the accuracy of measured values, diversity and allowable measurement time are linked with the methods of production. Modern manufacturing methods based on computer-aided design systems/manufacturing/engineering systems require a non-contact optical measurement method based on the computer-aided-based coordinate measuring technique. In case of the non-contact optical scanning method based on the ATOS GOM measuring system, time and measurement costs depend on the methodology of measurement and the possibility of its automation. This is why the presented paper has a practical impact on possibilities for the automation of geometric accuracy measurements of obtained elements in the series production line.

The use of ATOS Triple Scan II Blue Light by GOM Company allows the reduction of cost and time of production because of the possibility of the introduction of this system in an automated production line. Additionally, the measurement of hot section blades of aircraft engines by using the blue light method is much more accurate and has implication as it impacts safety of further used manufactured elements.

This paper presents the possibility of using the ATOS Triple Scan II Blue Light measuring system for geometric accuracy measurements in case of hot section blades of aircraft engines. This research is original because it describes three model geometric accuracy measurements, wax model obtained using the injection technique, wax model obtained using the I RP process and casting made of Inconel 713C nickel-based superalloy.

Straightness measurement of rail weld joint is of essential importance to railway maintenance. Due to the lack of efficient measurement equipment, there has been limited in-depth research on rail weld joint with a 5-m wavelength range, leaving a significant knowledge gap in this field.

In this study, the authors used the well-established inertial reference method (IR-method), and the state-of-the-art multi-point chord reference method (MCR-method). Two methods have been applied in different types of rail straightness measurement trollies, respectively. These instruments were tested in a high-speed rail section within a certain region of China. The test results were ultimately validated through using traditional straightedge and feeler gauge methods as reference data to evaluate the rail weld joint straightness within the 5-m wavelength range.

The research reveals that IR-method and MCR-method produce reasonably similar measurement results for wavelengths below 1 m. However, MCR-method outperforms IR-method in terms of accuracy for wavelengths exceeding 3 m. Furthermore, it was observed that IR-method, while operating at a slower speed, carries the risk of derailing and is incapable of detecting rail weld joints and low joints within the track.

The research compare two methods’ measurement effects in a longer wavelength range and demonstrate the superiority of MCR-method.

Introduction Zinc weight per unit area is a crucial factor in the durability of galvanised parts with respect to corrosion and may be correlated with the thickness of the galvanised coating by means of the latter's density. Thus, the thicker the coating, the longer the part is bound to last.

This paper verifies the adequacy of perceived quality measurement instruments by comparing the SERVPERF and EP methods. After a discussion of the differences between the two methods, a quality perception measurement instrument for the company is developed and applied to a sample of ceramic company clients. The methods are compared by analyzing the multitrait‐multimethod matrix using the structural equation model methodology. Results indicate that SERVPERF has greater reliability, greater convergent and discriminant validity, explains variance more completely, and consequently introduces less bias.