Search results

In this paper, the authors applied the empirical likelihood method, which was originally proposed by Owen, to the copula moment based estimation methods to take advantage of its properties, effectiveness, flexibility and reliability of the nonparametric methods, which have limiting chi-square distributions and may be used to obtain tests or confidence intervals. The authors derive an asymptotically normal estimator of the empirical likelihood based on copula moment estimation methods (ELCM). Finally numerical performance with a simulation experiment of ELCM estimator is studied and compared to the CM estimator, with a good result.

In this paper we applied the empirical likelihood method which originally proposed by Owen, to the copula moment based estimation methods.

We derive an asymptotically normal estimator of the empirical likelihood based on copula moment estimation methods (ELCM). Finally numerical performance with a simulation experiment of ELCM estimator is studied and compared to the CM estimator, with a good result.

In this paper we applied the empirical likelihood method which originally proposed by Owen 1988, to the copula moment based estimation methods given by Brahimi and Necir 2012. We derive an new estimator of copula parameters and the asymptotic normality of the empirical likelihood based on copula moment estimation methods.

The purpose of this paper is to develop a method suitable for the design of reinforced concrete columns subjected to a standard fire.

The Zone Method – a ’simplified calculation method” included in Eurocode 2 – has been developed by Hertz as a manual calculation scheme for the check of fire resistance of concrete sections. The basic idea is to disregard the thermal strains and to calculate the resistance of a cross-section by reducing the concrete cross-section by a “damaged zone”. It is assumed that all fibers can reach their ultimate, temperature dependent strength. Therefore, it is a plastic concept; the information on the state of strain is lost. The calculation of curvatures and deflections is thus only possible by making further assumptions. Extensions of the zone method toward a general calculation method, suitable for the implementation in commercial design software and using the temperature dependent stress–strain curves of the Advanced Calculation Method, have been developed in Germany. The extension by Cyllok and Achenbach is presented in detail. The necessary assumptions of the Zone Method are reviewed, and an improved proposal for the consideration of the reinforcement in this extended Zone Method is presented.

The principles and assumptions of the Zone Method proposed by Hertz can be validated.

An extension of the Zone Method suitable for the implementation in design software is proposed.

The study aims to evaluate the influence of capital structure decisions and asset structure on firms' performance for East African listed nonfinancial firms.

The research is descriptive and employs secondary data from the East African capital markets' websites. The generalized method of moments approach is used to estimate the relationship due to its ability to account for endogeneity problems.

The result shows that capital structure decisions and asset structure strongly influence the firms' performance. When long-term debts, short-term debts and tangible fixed assets increase, the return on total assets increases. An increase in the total debt ratio raises the return on equity (ROE). However, the increase in long-term debt lowers the ROE.

The results will help investors and potential investors decide on a financing policy that maximizes performance. Likewise, governments and other policymakers review the capital markets' frameworks to attract institutional and individual investors to the markets for financial availability and to increase profitability.

The research provides evidence on the influence of capital structure decisions and asset structure on firms' performance. Furthermore, its results contribute to firms' financing policy formulation and the corporate finance literature.

The purpose of this study is to investigate the relationship between fiscal policy (tax revenues and government expenditure) and economic happiness. The panel data are used from 2012 to 2016 for 18 countries of the Middle East and North Africa (MENA) region.

The study adopted the Barro (1990) model of endogeneity growth to characterize the relationship between fiscal policy and economic happiness. The study estimated the model by using the pooled ordinary least squares method, the fixed effects method and the random-effects method. In addition, the study used the dynamic estimate of this relationship rather than the conventional static estimate through the generalized method of moments’ method. This leads to overcoming the endogeneity problem between the dependent variable and the independent variables.

The main findings indicated that there is a negative and statistically significant relationship between nondistortionary taxes and economic happiness. Also, there is no relationship between public expenditure and economic happiness, whether productive or nonproductive. The results confirmed a positive and significant relationship between other revenues and economic happiness. The current study recommended the diversification of other public revenue sources to increase its contribution to public expenditure financing and the restructuring of the tax system, particularly nondistortionary taxes. These taxes must be replaced by other revenues or by distortionary taxes to increase economic happiness.

The research represents a strong starting base that can help researchers to conduct more studies on economic happiness by using different measures and comparing their results to find out the determinants of happiness. The relationship between economic happiness and fiscal policy with its different aspects requires more studies, especially the relationship between taxes and economic happiness in our region. The study of the relationship between public expenditure and economic happiness according to economic activities can guide decision-makers to direct the expenditure toward economic activities that achieve the happiness of their citizens. Enriching this study requires the availability of fiscal data for the entire MENA region for longer periods, which allow us to divide the countries of the region into petroleum and nonpetroleum countries, but the scarcity of data is one of the limitations of the study.

The governments of MENA countries should diversify other public revenue sources to increase the financing public expenditure by the expense of tax revenues, especially nondistortionary taxes, which would increase the economic happiness of their citizens.

This study is one of the rare studies that investigate the relationship between fiscal policy and economic happiness at the global level. This study contributed to filling the gap of this issue in the MENA region and enriching global literature through the experience of the MENA region. Moreover, this study investigated all aspects of fiscal policy, in contrast to other studies that focused on one of its aspects. The weakness in these studies is because of the lack of correlation between the sources of revenues and the face of their spending.

The purpose of this paper is to present a fast and bare bones implementation of a numerical method for quickly simulating turbulent thermal flows on GPUs. The work also validates earlier research showing that the lattice Boltzmann method (LBM) method is suitable for complex thermal flows.

A dual lattice hydrodynamic (D3Q27) thermal (D3Q7) multiple-relaxation time LBM model capable of thermal DNS calculations is implemented in CUDA.

The model has the same computational performance compared to earlier publications of similar LBM solvers. The solver is validated against three benchmark cases for turbulent thermal flow with available data and is shown to be in excellent agreement.

The combination of a D3Q27 and D3Q7 stencil for a multiple relaxation time -LBM has, to the authors’ knowledge, not been used for simulations of thermal flows. The code is made available in a public repository under a free license.

The performance of financial markets is significantly influenced by the political environment during general elections. This study investigates the effect of general elections on stock market performance in selected African markets.

Prior studies have been inconsistent in determining whether electioneering events negatively or positively influence stock market performance. The study utilized panel data set with annual observations from 1990 to 2020. The generalized method of moments (GMM) is employed to investigate the effect of electioneering and change in government on key stock market performance indicators, including stock market capitalization, stock market turnover ratio and the value of stock traded.

The study finds that electioneering activities generally have a positive impact on the performance of the stock market, whereas a change in government has a negative impact. As a result, the study recommends that stakeholders of the stock market remain vigilant and actively monitor electioneering events to devise and implement effective policies aimed at mitigating political risks during general elections. By adopting these measures, investor confidence can be significantly enhanced, fostering a more robust and secure investment environment.

The study investigates a neglected section of the literature by highlighting not only the effect of elections on stock market indicators but also possible change in government during elections.

The decarbonization of power generation is key to achieving carbon neutrality in China by the end of 2060. This paper aims to examine how green finance influences China’s low-carbon transition of power generation. Using a provincial panel data set as an empirical study example, green finance is assessed first, then empirically analyses the influences of green finance on the low-carbon transition of power generation, as well as intermediary mechanisms at play. Finally, this paper makes relevant recommendations for peak carbon and carbon neutrality in China.

To begin with, an evaluation index system with five indicators is constructed with entropy weighting method. Second, this paper uses the share of coal-fired power generation that takes in total power generation as an inverse indicator to measure the low-carbon transition in power generation. Finally, the authors perform generalized method of moments (GMM) econometric model to examine how green finance influences China’s low-carbon transition of power generation by taking advantage of 30 provincial panel data sets, spanning the period of 2007–2019. Meanwhile, the implementation of the 2016 Guidance on Green Finance is used as a turning point to address endogeneity using difference-in-difference method (DID).

The prosperity of green finance can markedly reduce the share of thermal power generation in total electricity generation, which implies a trend toward China’s low-carbon transformation in the power generation industry. Urbanization and R&D investment are driving forces influencing low-carbon transition, while economic development hinders the low-carbon transition. The conclusions remain robust after a series of tests such as the DID method, instrumental variable method and replacement indicators. Notably, the results of the mechanism analysis suggest that green finance contributes to low-carbon transformation in power generation by reducing secondary sectoral share, reducing the production of export products, promoting the advancement of green technologies and expanding the proportion of new installed capacity of renewable energy.

This paper puts forward relevant suggestions for promoting the green finance development with countermeasures such as allowing low interest rate for renewable energy power generation, facilitating market function and using carbon trade market. Additional policy implication is to promote high quality urbanization and increase R&D investment while pursuing high quality economic development. The last implication is to develop mechanism to strengthen the transformation of industrial structure, to promote high quality trade from high carbon manufactured products to low-carbon products, to stimulate more investment in green technology innovation and to accelerate the greening of installed structure in power generation industry.

This paper first attempts to examine the low-carbon transition in power generation from a new perspective of green finance. Second, this paper analyses the mechanism through several aspects: the share of secondary industry, the output of exported products, advances in green technology and the share of renewable energy in new installed capacity, which has not yet been done. Finally, this study constructs a system of indicators to evaluate green finance, including five indicators with entropy weighting method. In conclusion, this paper provides scientific references for sustainable development in China, and meanwhile for other developing countries with similar characteristics.

Some progress have been made over time in improving health conditions in Sub-Saharan Africa (SSA). There are, however, contradicting reports on the relationship between health outcomes and economic growth in the region. The paper aimed at assessing the effect of health outcome on economic growth in SSA.

Data for 41 countries from 2000 to 2018 were obtained from WDI and WGI and analyzed using system generalized method of moment (sGMM) which is appropriate for the present scenario. AR(1) and AR(2) tests were used to assess the validity of the model while Sargan and Hansen tests were adopted to examine the validity of the instrumental variables. The robustness of the estimation was confirmed using the pooled OLS and fixed effect regression.

Health outcome (proxied by life expectancy), lagged GDP per capita, capital formation, labor force (LF), health expenditure (HE), foreign direct investment (FDI) and trade openness (TOP) significantly affected economic growth emphasizing the importance of health in the process of economic growth in the region. AR(1) and AR(2) tests for serial correlation and Sargan/Hansen tests confirmed the validity of the estimated model and the instrumental variables respectively. Robustness of the GMM results was established from the pooled OLS and the fixed effect model results.

Improvement in the national health system possibly through the widespread adoption of National Health Insurance, increase government spending on healthcare alongside increased beneficial trade and ease of doing business to facilitate investment were recommended to enhance.

The study used up-to-date data with appropriate methodology.

The aim of this paper is to disentangle the contemporaneous and non-contemporaneous relationship between regional business cycles and manufacturing productivity in a developing country, namely Colombia.

The methodology is quantitative. To deal with the problems of endogeneity in the production function and with the law motion of productivity (the Markov process), the authors obtain Total Factor Productivity (TFP) through the Wooldridge’s two equations system that can be jointly estimated under the generalized method of moments framework (GMM). Secondly, to avoid bias we estimate regional business cycles through the Kalman filter. Subsequently, we implement an instrumental variables/generalized method of moments regression (IV/GMM) to capture the contemporaneous and endogenous TFP–GDP cycles’ linkage at the regional level. Lastly, to deal with the non-contemporaneous link, the authors estimate a vector autoregressive model with exogenous variables (VARX) for each region. We also present the corresponding impulse–response functions.

The authors’ general results suggest a remarkable causality, both contemporary and non-contemporary, from productivity to GDP (but not vice versa) in the most developed regions of the country. This implied productivity could influence in the economic growth of regions in short and long runs. These results are different than those expected by economic theory and should be considered by local economic policy makers.

The authors consider that a more detailed analysis should be carried out at the level of each sector within the manufacturing industry to further clarify these findings.

The policy should be oriented to obtaining cutting-edge technologies through subsidies, and also should facilitate the access to financial capital and the investment in R&D laboratories. On the other hand, the link with international trade also must be reinforced because the importing of intermediate inputs and exporting of output allow the firms to obtain embodied technologies, also to incur on learning by exporting and importing processes and finally to gain experience and competitiveness in foreign markets.

The causality in the region that provides more than 50% of economic activity within the country (Third region) is only in one directional, from TFP towards gross domestic product (GDP) and not vice versa. As the influence from GDP towards TFP is minimal in the remaining regions, the manufacturing productivity influences both short and long run regional economic growth in Colombia. This implies that economic policy at the level of macro-region must be modified; the government should give additional support to the manufacturing sector, especially in developed regions and for the small and medium-sized enterprises (SMEs) (wich represent 92% of manufacturing firms) to increase economic growth in the future.

The authors’ contribution is threefold. First, they pay special attention to the contemporaneous cyclical relationship (i.e. pro-cyclical, counter-cyclical or acyclic) and the non-contemporaneous causality with productivity. Second, they estimate productivity with the GMM two equation system considering an endogenous Markov process. Third, to the best of their knowledge, at least in the case of Latin America, there are no studies in this direction combining these statistic methods, including that of Colombia.