Search results

Purpose – In this study, the possibility of the application of rice husks for adsorbing Mn(II) ion in the water phase has been studied.

Design/Methodology/Approach – Experimental studies have been initiated by preparing activated carbon from rice husks. The activation of rice husks was done using both physical and chemical treatment methods through heating at 110 °C and washing with citric acid activator at 0.2 M, 0.4 M, and 0.6 M. The adsorption tests were conducted as two part tests: preliminary and primary. The preliminary test was conducted to choose the best condition of four independent variables, i.e., contact time (0–120 minutes), activator concentrations (0.2, 0.4, and 0.6 M), initial Mn(II) concentrations (10, 20, 50, 100, 200, and 400 mg/L), and adsorption temperatures (30, 47, and 67 °C).

Findings – By identifying the substituted groups using Fourier Transform Infrared Spectroscopy after activation with citric acid, it was found that the highest transmittance percentage was present in activated carbon with 0.2 M of citric acid. The best adsorption capacity and efficiency was 13.87 mg/g and 79.60%, respectively, which were obtained at 200 mg/L initial concentration with a 0.2 M citric acid concentration for 120 min contact time at 47 °C. These results lead to a conclusion that rice husks after activation with citric acid can be applied as an adsorbent for Mn(II) adsorption in the water phase.

Research Limitations/Implications – The activated carbon produced was only applicable for the adsorption of Mn(II) ions from the water phase, but not applicable for the adsorption of other heavy metals ions.

Practical Implications – Rice husks were potentially prepared as an adsorbent for Mn(II) ion adsorption in the water phase that was low cost, environmental friendly, and easy to prepare.

Originality/Value – Activated carbon prepared from biomass was mostly carried out using acids at high concentrations while the study was conducted using weak acids (citric acid) at low concentrations.

Purpose – The purpose of this paper to immobilization provides biosorbent particle with density and mechanichal strength, immobilization can save the cost of separating from biomass, can be regeneration and to increase adsorption capacity for metal ions.

Design/Methodology/Approach – The parameters affecting the adsorption, such as initial metal ion concentration, pH, contact time, and temperature, were studied. The analysis of biosorbent functional group was carried out by Fourier Transform Infrared Spectroscopy, SEM-EDX, for elemental analysis.

Findings – Optimum pH condition for biosorption Cd(II) was pH 5, contact time was 45 min, and initial concentration was 250 mg/L. Biosorbent analysis was characterized using SEM-EDX and FTIR analysis. Kinetics adsorption was studied and analyzed in terms of the pseudo-first-order, pseudo-second-order, and intraparticle diffusion kinetics models. The result showed that the biosorption for Cd(II) ion followed the pseudo-second-order kinetic model. Biosorption data of Cd(II) ion at 300°K, 308°K, and 318°K was analyzed with Temkin, Langmuir, and Freundlich isotherms. Biosorption of Cd(II) by durian seed immobilization in alginate according to the Langmuir isotherm equation provided a coefficient correlation of r² = 0.939 and maximum capacity biosorption of 25.05 mg/g.

Heavy metals play a crucial role in the economic development of any nation. Industries utilizing heavy metals, consequently, emanate a large volume of metal-containing liquid effluents. Since metals are non-renewable and finite resources, their judicious and sustainable use is the key. Hazardous metal-laden water poses threat to human health and ecology. Apart from metals, these industrial effluents also consist of toxic chemicals. Conventional physical–chemical techniques are not efficient enough as it consumes energy and are, therefore, not cost effective.

It is known that biomaterials namely microorganisms, plants, and agricultural biomass have the competence to bind metals, in some cases, selectively, from aqueous medium. This phenomenon is termed as “metal biosorption.” Biosorption has immense potential of becoming an effective alternative over conventional methods. The authors in the present chapter have used secondary data from their previous research work and attempted to develop few strategic models through their feasibility studies for metal sustainability.

Purpose – Description of the effects of the revolution in neuroscience and other areas of biology that can help to explain the roots of some portion of violent crime. The chapter reconsiders the role of brain chemistry in social behavior and violent behavior. To illustrate the interdisciplinary complexities entailed when linking brain chemistry to policy decisions concerning violent crime, this analysis has four main stages: first, why might SiFs (H2SiF6 and Na2SiF6, jointly called “silicofluorides” or SiFs) be dangerous? Second, what biochemical effects of SiF could have toxic consequences for humans? Third, on this basis a research hypothesis predicts children in communities using SiF should have increased uptake of lead from environmental sources and higher rates of behavioral dysfunctions known to be caused by lead neurotoxicity.

Design/methodology/approach – To illustrate the implications of the new issues involved, this chapter focuses on a public policy that inadvertently seems to increase rates of violent crime. Since violent behavior is one of the effects of lead neurotoxicity, the hypothesis is tested using multiple sources of data including rates of violent crime studied using a variety of multivariate statistical techniques (including analysis of variance, multiple regression, and stepwise regression).

Findings – Various data sources point to greater violence among individuals with greater exposure to SiFs.

Originality/value – Testing hypotheses linking neurotoxins to violent behavior reveals the generally unsuspected value of analyzing human social behavior and public policy from the perspective of evolutionary psychology.

The sustainable performance of hotels which constitute a major part of the tourism industry, gains increasing importance day by day. Sustainability has become mandatory not only for the tourism industry but also for all industries producing goods and services. Reducing the negative impact of development on the environment and environmental innovation which aims to benefit from natural resources and energy effectively and consciously helps hotels to be sustainable. The tourism industry has a complex structure and exists as being intertwined with other branches of science. Tourism, which is a multidisciplinary industry, is nourished by other branches of science as well as supplies other fields of science by providing working space. Some new solutions that are put forward by materials science and engineering take place in the tourism industry as new innovations. Owing to this interaction, the workload of the personnel working in hotels is reduced and the enterprises save material and energy. At the same time, the customers who benefit from the services of the hotels consume the services in more comfortable and safer environments.

Ceramic materials are generally used in toilet and bathroom parts of hotels. However, ceramics are observed to be used in lobbies, cafes, restaurants, pools, facades, and similar areas in addition to toilets and baths in hotels. The aim of this study is to identify new ceramic solutions that affect and contribute to the sustainability of the hotels which is a major sector under the roof of the tourism industry and to contribute the literature. In order to actualize this aim, the document analysis method which is one of qualitative research methods was used and the literature search was carried out to identify new ceramic solutions. The result of study includes moisture control tiles with the ability to keep the humidity at normal standards in terms of human health and that can be used in hotels, facade systems that clean themselves and the polluted air, thermal coating systems for heat insulation, antibacterial materials that provide hygiene, and dirt repelling products. Also, it is seen that there are new ceramic solutions such as costless night lighting and security strips as well as materials with a phosphorescence property for aesthetical purposes and also, tiles with heat control which offer different possibilities aesthetically. It is observed that the different benefits obtained from each of identified new ceramic solutions ease off the workload of personnel working in the hotels, enable material and energy saving in hotels and at the same time, provide an accommodation in a more comfortable and safer environment for customers. In addition to this, the use of high-technology ceramics and nanomaterials in the field of tourism creates places where technology and aesthetics combine.

Bioenergy remains the largest branch of renewable energy, and microalgae are a promising object of research among other types of biomasses whose scale for energy purposes is increasing. On the other hand, the growth of global energy production and urbanization, which results in high rates of municipal waste and wastewater generation, requires the development of integrated technologies that allow waste to be disposed of as fully as possible. Sustainable investments in the production of energy by various technologies are one of the methods to solve this complex problem. In this chapter, we study the methods of microalgae utilization of nutrients from wastewater and by-product liquid waste of sustainable investments from microalgae by hydrothermal liquefaction (HTL) technology. Wastewater has a complex composition, and the treatment of nitrogen and phosphorus and other biogenic elements, as well as heavy metals, using biological objects is optimal and cost-effective. Also the water phase after HTL is a by-product that has limited energy value. Biofuel investments have higher growth rates and at the same time do not compete with the investments in fossil fuels. Biofuel investments' cost of seaweed fuel can be reduced through high-value-added related products, such as food and feed additives, and pharmaceutical and cosmetic products.

There is an urgent need to develop climate-smart agrosystems capable of mitigating climate change and adapting to its effects. Conventional agricultural practices prevail in Mauritius, whereby synthetic chemical fertilizers, pesticides and insecticides are used. It should be noted that Mauritius remains a net-food importing developing country of staple food such as cereals and products, roots and tubers, pulses, oil crops, vegetables, fruits and meat (FAO, 2011). In Mauritius, the agricultural sector faces extreme weather conditions like drought or heavy rainfall. Moreover, to increase the crop yields, farmers tend to use 2.5 times the prescribed amount of fertilizers in their fields. These excess fertilizers are washed away during heavy rainfall and contaminate lakes and river waters. By using smart irrigation and fertilization system, a better management of soil water reserves for improved agricultural production can be implemented. Soil Nitrogen, Phosphorus and Potassium (NPK) content, humidity, pH, conductivity and moisture data can be monitored through the cloud platform. The data will be processed at the level of the cloud and an appropriate mix of NPK and irrigation will be used to optimise the growth of the crops. Machine learning algorithms will be used for the control of the land drainage, fertilization and irrigation systems and real time data will be available through a mobile application for the whole system. This will contribute towards the Sustainable Development Goals (SDGs): 2 (Zero Hunger), 11 (Sustainable cities and communities), 12 (Responsible consumption and production) and 15 (Life on Land). With this project, the yield of crops will be boosted, thus reducing the hunger rate (SDG 2). On top of that, this will encourage farmers to collect the waters and reduce fertilizer consumption thereafter sustaining the quality of the soil on which they are cultivating the crops, thereby increasing their yields (SDG 15).

Purpose – In this research, we have prepared activated carbon (AC) from the waste of banana peels (Musa acuminate L.) using potassium hydroxide (KOH) for carbon monoxide (CO) adsorption from motorcycle gas emission.

Design/Methodology/Approach – The activation was conducted using a chemical activator (KOH) at various concentrations of 1, 2, and 3 N for 1, 2, and 3 h, respectively. Characteristics of banana peels AC (BPAC) produced were analyzed using the Fourier-transform infra-red spectroscopy and scanning electron microscopy.

Findings – Results showed that KOH concentration and activation time strongly affected the CO adsorption and opening of the AC surface pore. There was an increase in the CO sorption when the KOH concentration was increased up to 3 N concentration. The highest CO adsorption from the emission occurred at 70.95% under KOH concentration of 3 N during the 3-h preparation.

Research Limitations/Implications – BPAC has been used as an adsorbent for only CO from motorcycle gas emission but not as an adsorbent for HC, NO, NO_x, or H₂S.

Practical Implications – BPAC can be used as the potential adsorbent for the removal of CO from motorcycle gas emission, and it is an environmental friendly, low cost, and easy to make adsorbent.

Originality/Value – In this study, the AC is made from biomass and is used in wastewater treatment, but limited studies are found on the removal of CO from motorcycle gas emission.

In this paper we appraise the ways in which use of closed-system proprietary product architectures versus open-system modular product architectures is likely to influence the dynamics and trajectory of new product market formation. We compare the evolutions of new markets in China for gas-powered two-wheeled vehicles (G2WVs) based (initially) on closed-system proprietary architectures and for electric-powered two-wheeled vehicles (E2WVs) based on open-system modular architectures. We draw on this comparison to suggest ways in which the use of the two different kinds of architectures as the basis for new kinds of products may result in very different patterns and speeds of new market formation. We then suggest some key implications of the different dynamics of market formation associated with open-system modular architectures for both the competence-based strategic management (CBSM) of firms and for technology and economic development policies of governments.

Specifically, we suggest how the use of open-system modular product architectures as the basis for new products is likely to result in dynamics of new market formation that call for new approaches to the strategic management of innovation and product creation. We also suggest technology and economic development policies favoring use of open-system modular architectures may stimulate new market formation and related economic development by providing platforms for accelerating technology development and dissemination, facilitating the formation of an industrial base of assemblers and component suppliers, assisting new firms in building customer relationships, enabling more geographically diffused economic development within countries, and facilitating development of export markets. We also suggest directions for further research into the potential for open-system modular product architectures to enable bottom-of-the-pyramid innovation processes, frugal engineering in developing economies, and development of low-cost product variations more generally.