Search results

This paper gives a bibliographical review of the finite element methods (FEMs) applied to the analysis of ceramics and glass materials. The bibliography at the end of the paper contains references to papers, conference proceedings and theses/dissertations on the subject that were published between 1977‐1998. The following topics are included: ceramics – material and mechanical properties in general, ceramic coatings and joining problems, ceramic composites, ferrites, piezoceramics, ceramic tools and machining, material processing simulations, fracture mechanics and damage, applications of ceramic/composites in engineering; glass – material and mechanical properties in general, glass fiber composites, material processing simulations, fracture mechanics and damage, and applications of glasses in engineering.

Presents development and characterisation of a new metal/polymer composite material for use in fused deposition modelling (FDM) rapid prototyping process with the aim of application to direct rapid tooling. The work represents a major development in reducing the cost and time in rapid tooling.

The material consists of iron particles in a nylon type matrix. The detailed formulation and characterisation of the thermal properties of the various combinations of the new composites are investigated experimentally. Results are compared with other metal/polymer composites used in rapid tooling.

The feedstock filaments of this composite have been produced and used successfully in the unmodified FDM system for direct rapid tooling of injection moulding inserts. Thermal properties are found to be acceptable for rapid tooling applications for injection moulding.

Introduces an entirely new metal based composite material for direct rapid tooling application using FDM RP system with desired thermal properties and characteristics. This will reduce the cost and time of manufacturing tooling inserts and dies for injection moulding.

This paper gives a review of the finite element techniques (FE) applied in the area of material processing. The latest trends in metal forming, non‐metal forming, powder metallurgy and composite material processing are briefly discussed. The range of applications of finite elements on these subjects is extremely wide and cannot be presented in a single paper; therefore the aim of the paper is to give FE researchers/users only an encyclopaedic view of the different possibilities that exist today in the various fields mentioned above. An appendix included at the end of the paper presents a bibliography on finite element applications in material processing for 1994‐1996, where 1,370 references are listed. This bibliography is an updating of the paper written by Brannberg and Mackerle which has been published in Engineering Computations, Vol. 11 No. 5, 1994, pp. 413‐55.

Al‐alumina interconnected phase composites were processed using the direct fused deposition process. These materials with tailored microstructures can find applications as structural materials with gradient properties.

In this process, feedstock material with fused silica as a starting material was compounded at a high shear mixer and then extruded as a filament using a single screw extruder. Extruded filaments were used with a commercial fused deposition modeler, FDM 1650, to process controlled porosity green ceramic structures. Porous green ceramic preforms were subjected to binder removal and sintering cycles in furnace air. Controlled porosity sintered ceramic structures were infiltrated with Al 5052 metal by pressureless reactive metal infiltration to form an in situ Al‐alumina structured composite.

The main advantage for this approach is to control distribution of both metal and ceramic phases in the composite. During metal infiltration good bonding was observed between the metal and the ceramic phases. Composites were tested under both quasi‐static and dynamic shock loading to evaluate their mechanical properties. Compression strength of these composites was 689±95 MPa.

This paper describes application of the direct fused deposition process for fabrication of ceramic/metal composites where both macrostructure as well as microstructure can be controlled simultaneously. The paper also focuses on one of the potential application area for 5052‐Al alloy.

Rapid tooling (RT) integrated with additive manufacturing technologies have been implemented in various sectors of the RT industry in recent years with various kinds of prototype applications, especially in the development of new products. The purpose of this study is to analyze the current application trends of RT techniques in producing hybrid mold inserts.

The direct and indirect RT techniques discussed in this paper are aimed at developing a hybrid mold insert using metal epoxy composite (MEC) in increasing the speed of tooling development and performance. An extensive review of the suitable development approach of hybrid mold inserts, material preparation and filler effect on physical and mechanical properties has been conducted.

Latest research studies indicate that it is possible to develop a hybrid material through the combination of different shapes/sizes of filler particles and it is expected to improve the compressive strength, thermal conductivity and consequently increasing the hybrid mold performance (cooling time and a number of molding cycles).

The number of research studies on RT for hybrid mold inserts is still lacking as compared to research studies on conventional manufacturing technology. One of the significant limitations is on the ways to improve physical and mechanical properties due to the limited type, size and shape of materials that are currently available.

This review presents the related information and highlights the current gaps related to this field of study. In addition, it appraises the new formulation of MEC materials for the hybrid mold inserts in injection molding application and RT for non-metal products.

The purpose of this paper is to present microstructural and fractographic analysis of damage in aluminum (2024T3)/carbon-fiber reinforced laminates (AlC) after static tensile test. The influence of fiber orientation on the failure was studied and discussed.

The subject of examination was AlC. The fiber–metal laminates (FMLs) were manufactured by stacking alternating layers of 2024-T3 aluminum alloy (0.3 mm per sheets) and carbon/epoxy composites made of unidirectional prepreg tape HexPly system (Hexcel, USA) in [0], [± 45] and [0/90]S configuration. The fractographic analysis was carried out after static tensile test on the damage area of the specimens. The mechanical tests have been performed in accordance to ASTM D3039. The microstructural and fractographic analysis of FMLs were studied using optical (Nikon SMZ1500, Japan) and scanning electron microscope (Zeiss Ultra Plus, Germany).

FMLs based on aluminum and carbon/epoxy composite are characterized by high tensile properties depending on their individual components and the orientation of the reinforcing fibers, failure of hybrid laminates indicates the complexity process of degradation of these materials. The nature of damage in FML layers is similar to that typical in polymer composites with interlaminar delaminations, transverse cracks of the composite layers, degradation of fiber/matrix interface, damage process in FMLs is also associated mainly with interface between metal and fiber reinforced composite. The mixed damage – cohesive and adhesive – was observed.

One of the most important aspect in the designing and manufacturing process in the service life of composite structures is damage mechanisms. The damage processes in composite materials, particularly in FMLs, are more complex in comparison to metal materials and fiber reinforced polymers.

Recent trends in material science show a considerable interest in the manufacturing of metal matrix composites to meet the stringent demands of lightweight, high strength and corrosion resistance. Aluminium is the popular matrix metal currently in vogue that can be reinforced with ceramic materials such as particulates to meet the desired property. The purpose of this paper is to fabricate hybrid metal matrix composites to improve the dry sliding wear resistance and to study of the effect of sliding speed, load and reinforcement (alumina and graphite) on wear properties, as well as its contact friction.

The present study addresses the dry sliding wear behaviour of Al‐Si10Mg alloy reinforced with 3, 6 and 9 wt% of alumina along with 3 wt% of graphite. Stir casting method was used to fabricate the composites. Mechanical properties such as hardness and tensile strength have been evaluated. A pin‐on‐disc wear test apparatus was used to evaluate the wear rate and coefficient of friction by varying the loads of 20, 30 and 40 N, sliding speeds of 1.5 m/s, 2.5 m/s and 3.5 m/s at a constant sliding distance of 2100 m.

Mechanical properties of hybrid metal matrix composites (HMMCs) have shown significant improvement. The wear rate and coefficient of friction for alloy and composites decreased with increase in sliding speed and increased with increase in applied load. Temperature rise during wearing process for monolithic alloy was larger than that of HMMCs and Al/9% Al₂O₃/3% Gr composite showing the minimum temperature rise.The worn surfaces of the composites were investigated using scanning electron microscope.

The paper shows that aluminium composites can improve strength and wear resistance.

HMMCs has proven to be useful in improving the dry sliding wear resistance.

Among various efforts pursued to produce fuel efficient vehicles, light weight engineering (i.e. the use of low‐density structurally‐efficient materials, the application of advanced manufacturing and joining technologies and the design of highly‐integrated, multi‐functional components/sub‐assemblies) plays a prominent role. In the present work, a multi‐disciplinary design optimization methodology has been presented and subsequently applied to the development of a light composite vehicle door (more specifically, to an inner door panel). The door design has been optimized with respect to its weight while meeting the requirements /constraints pertaining to the structural and NVH performances, crashworthiness, durability and manufacturability. In the optimization procedure, the number and orientation of the composite plies, the local laminate thickness and the shape of different door panel segments (each characterized by a given composite‐lay‐up architecture and uniform ply thicknesses) are used as design variables. The methodology developed in the present work is subsequently used to carry out weight optimization of the front door on Ford Taurus, model year 2001. The emphasis in the present work is placed on highlighting the scientific and engineering issues accompanying multidisciplinary design optimization and less on the outcome of the optimization analysis and the computational resources/architecture needed to support such activity.

Ceramic materials and glasses have become important in modern industry as well as in the consumer environment. Heat resistant ceramics are used in the metal forming processes or as welding and brazing fixtures, etc. Ceramic materials are frequently used in industries where a wear and chemical resistance are required criteria (seals, liners, grinding wheels, machining tools, etc.). Electrical, magnetic and optical properties of ceramic materials are important in electrical and electronic industries where these materials are used as sensors and actuators, integrated circuits, piezoelectric transducers, ultrasonic devices, microwave devices, magnetic tapes, and in other applications. A significant amount of literature is available on the finite element modelling (FEM) of ceramics and glass. This paper gives a listing of these published papers and is a continuation of the author's bibliography entitled “Finite element modelling of ceramics and glass” and published in Engineering Computations, Vol. 16, 1999, pp. 510‐71 for the period 1977‐1998.

The form of the paper is a bibliography. Listed references have been retrieved from the author's database, MAKEBASE. Also Compendex has been checked. The period is 1998‐2004.

Provides a listing of 1,432 references. The following topics are included: ceramics – material and mechanical properties in general, ceramic coatings and joining problems, ceramic composites, piezoceramics, ceramic tools and machining, material processing simulations, fracture mechanics and damage, applications of ceramic/composites in engineering; glass – material and mechanical properties in general, glass fiber composites, material processing simulations, fracture mechanics and damage, and applications of glasses in engineering.

This paper makes it easy for professionals working with the numerical methods with applications to ceramics and glasses to be up‐to‐date in an effective way.

The SiC reinforced Al composite is perhaps the most successful class of metal matrix composites (MMCs) produced to date. They have found widespread application for aerospace, energy, and military purposes, as well as in other industries – for example, they have been used in electronic packaging, aerospace structures, aircraft and internal combustion engine components, and a variety of recreational products. In all these applications, welding plays a vital role. Little attention has been paid to SiC reinforced aluminium matrix composites joined by gas tungsten arc (GTA) welding. The purpose of this paper is to outline the manufacturing method for producing MMCs, GTA welding of MMCs and pitting corrosion analysis of welded MMCs.

This paper focuses upon production and welding of metal matrix composites. The welded composites have been treated at elevated and cryogenic temperatures for experimental studies. Pitting corrosion analysis of welded plates was carried out as per Box Benkehn Design.

From the results, it should be noted that maximum pitting resistance was observed with MMCs containing 10% SiC treated at cryogenic temperature. Corrosion resistance of welded composites treated at elevated temperature was found to be higher than that of as‐welded and at cryogenic temperature treated composites. The pitting potential increases with increase in % SiC to certain level and decreases with further increase in % SiC. Corrosion potential of composites treated at elevated temperature is high compared to other composites. Maximum pitting resistance is observed when the welding current was kept at 175 amps for 10% addition of SiC in LM25 matrix treated at cryogenic temperature.

The paper outlines the manufacturing method for producing MMCs, GTA welding of MMCs and pitting corrosion analysis of welded MMCs. The results obtained may be helpful for the automobile and aerospace industries.