Search results

The paper presents a method for the patterns simulation in the 3D virtual stitching and try-on system.

First, the patterns are designed using the garment CAD software and stored in the DXF format. Second, the regular grid method is employed to mesh the patterns to be quadrangular, and the patterns triangular meshing can be obtained by connecting the diagonal of the quadrangular. Then a mass-spring model is established, and the forces analysis and the explicit Euler integration method are employed to accomplish the patterns simulation. The paper demonstrates the robustness of our simulation through two sets of experiments, including a lady’s dress patterns meshing experiments and the experiments of the virtual stitching of the lady’s dress.

The patterns meshing algorithm can meet the requirements of the internal meshing and the boundary meshing, and it is very important to select an appropriate meshing density. The implementation of the virtual stitching of the lady’s dress proves the effectiveness and usability of the simulation methods.

The lady’s dress used in the experiments is a relatively simple fashion style, with only the front and back pattern. It is very worthy of further research on the effectiveness of the complex structure of clothing.

The paper includes practical implications of the methods of the patterns meshing and the virtual stitching of the simple fashion styles.

The simulation system is developed using VC++ 2015 with the help of the OpenGL functions library, which is proved as a simple, lower computation and robustness for the patterns simulation of the simple garments.

The purpose of this paper is to calculate the meshing stiffness of nutation face gear considering the roughness, establish the calculation method of time-varying meshing stiffness of rough tooth surface and analyze the influence of roughness, load and other factors on the meshing stiffness of tooth surface.

The Weierstrass–Mandelbrot (W-M) function in the Majumdar–Bhushan model is used to characterize the rough contact line of the tooth surface, the normal height and radius of the micro convex body are calculated and the contact flexibility of the contact point of the tooth surface is obtained. The contact flexibility and the bending shear deformation flexibility obtained previously are substituted into the improved deformation compatibility equation for iterative calculation, and the time-varying meshing stiffness of the nutation face gear considering the roughness is obtained.

Compared with ABAQUS finite element simulation results, it is found that the meshing stiffness curve of rough tooth surface is more gentle than that of smooth tooth surface, the meshing stiffness value is smaller and the meshing stiffness change is smaller at the position where the number of gear teeth coincide changes.

In the process of calculating contact deformation, the fractal theory W-M function is used to characterize the contact line of the rough nutation face gear, and the deformation coordination condition considering roughness is improved. Therefore, the method of time-varying meshing stiffness considering roughness can obtain more accurate results, which provides theory and data for the subsequent dynamics analysis of the nutation face gear transmission.

As the transmission component of a locomotive, the traction gear pair system has a direct effect on the stability and reliability of the whole machine. This paper aims to provide a detailed dynamic analysis for the traction system under internal and external excitations by numerical simulation.

A non-linear dynamic model of locomotive traction gear pair system is proposed, where the comprehensive time-varying meshing stiffness is obtained through the Ishikawa formula method and verified by the energy method, and then the sliding friction excitation is analyzed based on the location of the contact line. Meantime, the adhesion torque is constructed as a function of the adhesion-slip feature between wheelset and rail. Through Runge–Kutta numerical method, the system responses are studied with varying bifurcation parameters consisting of exciting frequency, load fluctuation, gear backlash, error fluctuation and friction coefficient. The dynamic behaviors of the system are analyzed and discussed from bifurcation diagram, time history, spectrum plot, phase portrait, Poincaré map and three-dimensional frequency spectrum.

The analysis results reveal that as control parameters vary the system experiences complex transition among a diverse range of motion states such as one-periodic, multi-periodic and chaotic motions. Specifically, the significant difference in system bifurcation characteristics can be observed under different adhesion conditions. The suitable gear backlash and error fluctuation can avoid the chaotic motion, and thus, reduce the vibration amplitude of the system. Similarly, the increasing friction coefficient can also suppress the unstable state and improve the stability of the system.

The numerical results may provide a systemic understanding of dynamic characteristics and present some available information to design and optimize the transmission performance of the locomotive traction system.

The purpose of this paper is to obtain the single-tooth stiffness, single-tooth time-varying meshing stiffness and comprehensive meshing stiffness of the internal and external face gears and to analyze the influence of the modulus, pressure angle and tooth width of each face gear on the single-tooth stiffness of the gear in nutation face gear transmission.

From the point of view of material mechanics, the gear teeth of nutation face gear are simplified as spacial variable cross-section beams. The shear deformation of gear teeth, the bending deformation of tooth root and the additional elastic deformation caused by the base deformation are gotten by simplified trapezoidal section method, thus the stiffness of nutation face gear teeth can be obtained. The comparison with finite element method results verifies the rationality of simplified trapezoidal section method for calculating the tooth stiffness of nutation face gear.

The variation of stiffness of internal and external face gears along the meshing line and tooth height in nutation face gear transmission is studied, and the variation laws of single tooth stiffness, single-tooth-pair mesh stiffness and single tooth time-varying meshing stiffness of nutation face gear teeth are obtained.

Nutation face gear transmission is a new type of transmission. The stiffness of face gear teeth is analyzed, and the variation rules of single tooth stiffness, single-tooth-pair mesh stiffness and single tooth time-varying meshing stiffness of nutation face gear teeth are obtained, which not only enriches the research of nutation face gear transmission but also has important guiding significance for the application of nutation face gear in engineering practice.

Gives a bibliographical review of the finite element meshing and remeshing from the theoretical as well as practical points of view. Topics such as adaptive techniques for meshing and remeshing, parallel processing in the finite element modelling, etc. are also included. The bibliography at the end of this paper contains 1,727 references to papers, conference proceedings and theses/dissertations dealing with presented subjects that were published between 1990 and 2001.

This study aims to develop an efficient algorithm for generation of conforming mesh for seepage analysis through 3D discrete fracture networks (DFN).

The algorithm is developed based on a refined conforming Delaunay triangulation scheme, which is then validated using analytical solutions. The algorithm is well able to meet the challenge of meshing complex geometry of DFNs.

A series of sensitivity analysis have been performed to evaluate the effect of meshing parameters on steady state solution of Darcy flow using a finite element scheme. The results show that an optimized minimum internal angle of meshing elements should be predetermined to guarantee termination of the algorithm.

The developed algorithm is computationally efficient, fast and is of low cost. Furthermore, it never changes the geometrical structure and connectivity pattern of the DFN.

Irregular windy loads are loaded for a wind turbine. This paper aims to determine the form of gear failure and the working life of the gear system by assessing the dynamic strength of gears and dynamic stress distribution.

The helical planetary gear system of the wind turbine growth rate gearbox was investigated, and while a variety of clearance and friction gear meshing processes were considered in the planetary gear system, a finite element model was built based on the contact–impact dynamics theory, solved using the explicit algorithm. The impact stress of the sun gear of the planetary gear system was calculated under different loads. An integrated planetary gear meshing stiffness, and the error of system dynamic transmission error were investigated when the planetary gear meshes with the sun or ring gears.

The load has little effect on the sun gear of the impact stress which was known. The varying stiffness is different while the planetary gear meshes with the sun and ring gears. There were differences between the planetary gear system and the planetary gear, and with load, the planetary gear transmission error decreases.

This study will provide basis knowledge for the planetary gear system.

Harmonic gears always work under different operating conditions and may usually break down due to lubrication failures, while its lubrication mechanism is still not clearly understood. This paper aims to present a lubrication model comprehensively considering the influence of contact geometry, lubrication properties and three-dimensional (3D) real surface roughness to analyze the lubrication performance under different conditions.

Based on the discrete convolution-fast Fourier transformation with duplicated padding and quasi-system numerical methods, the lubrication model for harmonic gears is developed, which is verified by comparing results with available lubrication data.

The effects of meshing process, working conditions and 3D roughness on the lubrication characteristics are discussed. From the calculated cases, the increase in rotational speed and decrease of applied torque may increase the film thickness, enhancing the lubrication performance of harmonic gears. It is also observed that proper surface roughness can be used for lubrication design.

The research results can provide theoretical guidance for improving lubrication performance and reducing friction/wear of the harmonic gear interfaces. This study can be promoted to various engineering scenarios of harmonic gears, such as industrial robots, space-driven agencies and precision measuring instruments.

The analysis of lubricating properties and efficiency is important for aviation high-speed gear. So far, the project of lubricating properties and efficiency are processing under the condition of a given lubricating state, which is still depending on practical experience. This paper aims to mostly focus on the analysis of given lubricating state but lost sight of the relevance of lubrication parameters and lubricating state, which not only makes the analysis of aviation high-speed gear transmission and efficiency fail to trace to practical situation but also has an adverse effect on the reliance and validity of the project.

Based on this, the numerical model of spraying oil and oil film spreading is established, and the quantitative relationship between spray lubrication parameters and spreading characteristics of oil film is studied. According to the geometric and mechanical conditions of meshing points and taking the influence of rich-oil/starved-oil lubrication and roughness of teeth surface into consideration, corrected film thickness under condition of elasto-hydrodynamic lubrication and lubricating state of mesh points are analyzed. On this basis, power consumption and efficiency of gear transmission are also calculated by figuring out the solid friction and oil friction separately.

Through the research of this thesis, the effect of friction power consumption and efficiency with lubrication parameters is discussed. The effect of lubrication parameters on friction power consumption and efficiency of gear is complex. With the increase of spreading film thickness and film length, the frictional power consumption is less and the efficiency is higher.

This work provides a systematic technological approach to lubrication design and efficiency calculation of aviation high-speed gear transmission, which has remarkable engineering significance for the accurate lubrication design of the aviation mechanical parts.

This paper aims to propose Bayesian filtering based on solving the Fokker–Planck equation, to improve the accuracy of filtering in non-Gauss case. Nonlinear filtering plays an important role in many science and engineering fields for estimating the state of dynamic system, but the existing filtering algorithms are mainly used for solving the problem of Gauss system.

Under the Bayesian framework, the time update of this filtering is based on solving Fokker–Planck equation, while the measurement update uses the Bayes formula directly. Therefore, this novel algorithm can be applied to nonlinear, non-Gaussian estimation. To reduce the computational complexity due to standard meshing, an adaptive meshing algorithm proposed which includes the coarse meshing, significant domain determination that is generated using extended Kalman filtering and Chebyshev’s inequality theorem, and value assignment for significant domain. Simulations are conducted on a reentry body tracking problem to demonstrate the effectiveness of this novel algorithm.

In this way, finer grid points can be placed in the regions with high conditional probability density, while the grid points with low conditional probability density can be neglected. The simulation results indicate that the novel algorithm can reduce the computational burden significantly compared to the standard meshing, while achieving similar accuracy.

A novel Bayesian filtering based on solving the Fokker–Planck equation using adaptive meshing is proposed, and the simulations show that algorithm can reduce the computational burden significantly compared to the standard meshing, while achieving similar accuracy.

A novel nonlinear filtering based on solving the Fokker–Planck equation is proposed. The novel algorithm is suitable for non-Gauss system, and can achieve similar accuracy compared to the standard meshing with the significant reduction of computational burden.