Search results

Late life depression is often associated with a poor response to antidepressants; therefore an alternative strategy for therapy is required. Although several studies have reported that phosphatidylserine (PS) may be effective for late life depression and that omega-3 fatty acids DHA and EPA have also proven beneficial for many higher mental functions, including depression, no concrete conclusion has been reached. This study was performed to clarify the effect of PS and omega-3 fatty acid-containing supplement for late life depression by not only clinical evaluation but also salivary cortisol levels. Eighteen elderly subjects with major depression were selected for the study. In all, insufficient improvement had been obtained by antidepressant therapy for at least 6 months. The exclusion criteria from prior brain magnetic resonance images (MRI) included the presence of structural MRI findings compatible with stroke or other gross brain lesions or malformations, but not white matter hypersensitivities. They took a supplement containing PS 100 mg, DHA 119 mg and EPA 70 mg three times a day for 12 weeks. The effects of the supplement were assessed using the 17-item Hamilton depression scale (HAMD17) and the basal levels and circadian rhythm of salivary cortisol. The study adopted them as indices because: salivary cortisol levels are high in patients with depression, their circadian rhythm related to salivary cortisol is often irregular, and these symptoms are alleviated as depression improves. The mean HAM-D17 in all subjects taking the supplement was significantly improved after 12 weeks of taking the supplement. These subjects were divided into 10 non-responders and 8 responders. The basal levels and circadian rhythm of salivary cortisol were normalized in the responders while not in non-responders. PS and omega-3 fatty acids, or other elements of the supplement, may be effective for late life depression, associated with the correction of basal levels and circadian rhythm of salivary cortisol.

Accurate values for infiltration rate are important to reliably estimate heat losses from buildings. Infiltration rate is rarely measured directly, and instead is usually estimated using algorithms or data from fan pressurisation tests. However, there is growing evidence that the commonly used methods for estimating infiltration rate are inaccurate in UK dwellings. Furthermore, most prior research was conducted during the winter season or relies on single measurements in each dwelling. Infiltration rates also affect the likelihood and severity of summertime overheating. The purpose of this work is to measure infiltration rates in summer, to compare this to different infiltration estimation methods, and to quantify the differences.

Fifteen whole house tracer gas tests were undertaken in the same test house during spring and summer to measure the whole building infiltration rate. Eleven infiltration estimation methods were used to predict infiltration rate, and these were compared to the measured values. Most, but not all, infiltration estimation methods relied on data from fan pressurisation (blower door) tests. A further four tracer gas tests were also done with trickle vents open to allow for comment on indoor air quality, but not compared to infiltration estimation methods.

The eleven estimation methods predicted infiltration rates between 64 and 208% higher than measured. The ASHRAE Enhanced derived infiltration rate (0.41 ach) was closest to the measured value of 0.25 ach, but still significantly different. The infiltration rate predicted by the “divide-by-20” rule of thumb, which is commonly used in the UK, was second furthest from the measured value at 0.73 ach. Indoor air quality is likely to be unsatisfactory in summer when windows are closed, even if trickle vents are open.

The findings have implications for those using dynamic thermal modelling to predict summertime overheating who, in the absence of a directly measured value for infiltration rate (i.e. by tracer gas), currently commonly use infiltration estimation methods such as the “divide-by-20” rule. Therefore, infiltration may be overestimated resulting in overheating risk and indoor air quality being incorrectly predicted.

Direct measurement of air infiltration rate is rare, especially multiple tests in a single home. Past measurements have invariably focused on the winter heating season. This work is original in that the tracer gas technique used to measure infiltration rate many times in a single dwelling during the summer. This work is also original in that it quantifies both the infiltration rate and its variability, and compares these to values produced by eleven infiltration estimation methods.

This study examines the osteoconductive and healing capabilities of locally implanted synthetic hydroxyapatite (sHAp) derived from eggshells in the central incisor sockets of rats.

Toxicity experiments were conducted in vitro and in vivo, to testify the safety dosage of sHAp. Around 24 mature male Sprague–Dawley (SD) rats had their upper central incisors extracted. The rats were placed into three groups of eight rats each: Group 1: the sockets of extracted central incisors were left unfilled (control), Group 2: filled up with commercially available hydroxyapatite (HAp) and Group 3: implanted with sHAp locally retrieved from eggshells. After extraction, four rats from each group were sacrificed at 2nd and 4th weeks. Maxillary tissue sections were obtained and stained with hematoxylin and eosin (H&E) and Masson’s trichome (MT) staining. Anti-osteocalcin (OCN) and proliferating cell nuclear antigen (PCNA) were used primary antibodies for immunohistochemistry (IHC) special labeling.

The results showed that the locally implanted sHAp was non-toxic and safe in cell lines (human osteoblast and fibroblast) and animals. Histological analysis of H&E, MT and IHC showed that the sockets treated with locally implanted sHAp from eggshells were filled with new bone tissue of comparable thickness to other groups.

This unique technique uses locally implanted eggshell-derived sHAp with osteoconductive characteristics. In an in vivo model, sHAps increased OCN and PCNA expression to improve bone repair.

Renal failure is an end-stage consequence after persistent hyperglycemia during diabetic nephropathy (DN), and the etiology of DN has been linked to oxidative stress. The purpose of this research was to determine the beneficial synergistic effects of S-Allyl Cysteine (SAC) and Taurine (TAU) on oxidative damage in the kidneys of type 2 diabetic rats induced by hyperglycemia.

Experimental diabetes was developed by administering intraperitoneal single dose of streptozotocin (STZ; 65 mg/kg) with nicotinamide (NA; 230 mg/kg) in adult rats. Diabetic and control rats were treated with SAC (150 mg/kg), TAU (200 mg/kg) or SAC and TAU combination (75 + 100 mg/kg) for four weeks. The estimation of body weight, fasting blood glucose (FBG), oral glucose tolerance test (OGTT), oxidative stress markers along with kidney histopathology was done to investigate the antidiabetic potential of SAC/TAU in the NA/STZ diabetic group.

The following results were obtained for the therapeutic efficacy of SAC/TAU: decrease in blood glucose level, decreased level of thiobarbituric acid reactive substances (TBARS) and increased levels of GSH, glutathione-s-transferase (GST) and catalase (CAT). SAC/TAU significantly modulated diabetes-induced histological changes in the kidney of rats.

SAC/TAU combination therapy modulated the oxidative stress markers in the kidney in diabetic rat model and also prevented oxidative damage as observed through histopathological findings.

In addition to agriculture, energy production, and industries, potable water plays a significant role in many fields, further increasing the demand for potable water. Purification and desalination play a major role in meeting the need for clean drinking water. Clean water is necessary in different areas, such as agriculture, industry, food industries, energy generation and in everyday chores.

The authors have used the different search engines like Google Scholar, Web of Science, Scopus and PubMed to find the relevant articles and prepared this mini review.

The various stages of water purification include coagulation and flocculation, coagulation, sedimentation and disinfection, which have been discussed in this mini review. Using nanotechnology in wastewater purification plants can minimize the cost of wastewater treatment plants by combining several conventional procedures into a single package.

In society, we need to avail clean water to meet our everyday, industrial and agricultural needs. Purification of grey water can meet the clean water scarcity and make the environment sustainable.

This mini review will encourage the researchers to find out ways in water remediation to meet the need of pure water in our planet and maintain sustainability.

This paper aims to print 3D structures from polymers that resist bacterial attachment by reactive jetting of acrylate monomers.

The first step towards printing was ink development. Inks were characterised to carry out an estimation of their potential printability using the Z parameter to predict stable jetting conditions. Printability conditions were optimised for each ink using a Dimatix DMP-2800, which enabled 3D structures to be fabricated.

UV photo-initiated polymers, which resist bacterial attachment, were found to be printable using piezo-based inkjet printers. The waveform required for each ink depends on the value of the Z parameter. Once the waveform and the printability parameters were optimised, 3D objects were fabricated.

This methodology has been confirmed as an effective method to 3D print materials that have been demonstrated to be bacteria resistant. However, ink curing depends on modification of some parameters (such as photoinitiator concentration or UV exposure time) which would result in an improvement of the curing process post jetting.

The combination of inkjet based 3D printing with new materials resistant to bacterial attachment means the possibility of building customised medical devices with a high level of complexity and bespoke features can be fully realised. The scope and variability of the devices produced will exceed what can be achieved using standard fabrication methodologies and can be applied to reduce the incidence of device associated infections and to address increased morbidity, mortality and health care costs associated with nosocomial infections.

In this paper, the novel use of materials that resist bacterial attachment has been described to build 3D structures using material jetting. Its value lies on the potential impact this methodology could produce in the biomedical device and research fields.

How does the human brain absorb information and turn it into skills of its own in psychotherapy? In an attempt to answer this question, the authors will review the intricacies of processing channels in psychotherapy and propose the term transprocessing (as in transduction and processing combined) for the underlying mechanisms. Through transprocessing the brain processes multimodal memories and creates reparative solutions in the course of psychotherapy. Transprocessing is proposed as a stage-sequenced mechanism of deconstruction of engrained patterns of response. Through psychotherapy, emotional-cognitive reintegration and its consolidation is accomplished. This process is mediated by cellular and neural plasticity changes.

This scientific article aims to evaluate the efficacy of the drug Doxorubicin for treating hepatocellular carcinoma (HCC) in Egypt. The study analyzes data from patients referred to a multi-disciplinary consultation at the National Cancer Institute, Cairo University. The study includes 40 intermediate-stage HCC patients who underwent treatment with either Doxorubicin-Lipiodol or Doxorubicin-loaded drug-eluting beads-trans-arterial chemoembolization (DEB-TACE).

Patients referred to a multi-disciplinary consultation at the National Cancer Institute, Cairo University with a possible diagnosis of HCC in the intermediate stage were eligible for the study.

The study finds that the plasma peak concentration of Doxorubicin is significantly higher in patients treated with Lipiodol compared to those treated with DEB-TACE. The median plasma peak concentration of patients treated with Lipiodol was significantly higher 424 (202.5–731) than the peak level of patients treated with beads 84.95 (26.6–156.5) with p-value = 0.036. However, there is no significant difference in other pharmacokinetic parameters between the two treatment groups. The research article also investigates the genetic polymorphisms in HCC patients treated with Doxorubicin-Lipiodol and Doxorubicin-loaded DEB-TACE. It identifies a significant association between the ABCB1 gene (C3435T) and the concentration of Doxorubicin in plasma. Patients with the CCand computed tomography (CT) genotypes of ABCB1 have higher concentrations of Doxorubicin compared to those with the TT genotype. Furthermore, the study examines the progression-free survival rates and tumour response in the two treatment groups. It demonstrates that DEB-TACE patients have a higher progression-free survival rate compared to cTACE patients. DEB-TACE also leads to better tumour regression.

The current study helps to increase the understanding of the genetic factors that may contribute to HCC susceptibility in the Egyptian population. However, it is essential to consider that genetic polymorphism is just one aspect of HCC risk, and other factors such as environment, lifestyle and viral infections also play crucial roles. Further research is needed to elucidate the complex interactions between genetic and environmental factors in HCC development among Egyptians.

This study aims to assess the effect of water variation on bioethanol production from cassava peels (CP) using Saccharomyces cerevisiae yeast as the ethanologenic agent.

The milled CP was divided into three treatment groups in a small-scale flask experiment where each 20 g CP was subjected to two-stage hydrolysis. Different amount of water was added to the fermentation process of CP. The fermented samples were collected every 24 h for various analyses.

The results of the fermentation revealed that the highest ethanol productivity and fermentation efficiency was obtained at 17.38 ± 0.30% and 0.139 ± 0.003 gL⁻¹ h⁻¹. The study affirmed that ethanol production was increased for the addition of water up to 35% for the CP hydrolysate process.

The finding of this study demonstrates that S. cerevisiae is the key player in industrial ethanol production among a variety of yeasts that produce ethanol through sugar fermentation. In order to design truly sustainable processes, it should be expanded to include a thorough analysis and the gradual scaling-up of this process to an industrial level.

This paper is an original research work dealing with bioethanol production from CP using S. cerevisiae microbe.

1. Hydrolysis of cassava peels using 13.1 M H₂SO₄ at 100 ^oC for 110 min gave high Glucose productivity

2. Highest ethanol production was obtained at 72 h of fermentation using Saccharomyces cerevisiae

3. Optimal bioethanol concentration and yield were obtained at a hydration level of 35% agitation

4. Highest ethanol productivity and fermentation efficiency were 17.3%, 0.139 g.L⁻¹.h⁻¹

Hydrolysis of cassava peels using 13.1 M H₂SO₄ at 100 ^oC for 110 min gave high Glucose productivity

Highest ethanol production was obtained at 72 h of fermentation using Saccharomyces cerevisiae

Optimal bioethanol concentration and yield were obtained at a hydration level of 35% agitation

Highest ethanol productivity and fermentation efficiency were 17.3%, 0.139 g.L⁻¹.h⁻¹

The purpose of this paper is to offer a Christian perspective on the ethical issues related to natural procreation and artificial reproduction methods.

This paper uses descriptive and comparative methodology between the ethical aspects specific to natural procreation and artificial reproduction.

Religious beliefs play a significant role in shaping the moral perspective when an infertile couple is confronted with the choice between natural procreation and artificial reproduction.

This paper survey a broad bibliography and offers a critical evaluation of the moral aspects specific to different methods of reproductive technologies compared to the natural procreation approach.