Search results

This paper aims to study implicitly the mediating role of entrepreneurial coaching between TQM soft practice and firm performance.

The data was gathered from 160 Tunisian-certified companies. The direct and indirect effect between TQM soft practice, entrepreneurial coaching and firm performance are shown using the structural equation modeling. It was performed using SPSS 20 software and AMOS 20 software.

First, TQM practices have a positive effect on entrepreneurial coaching. Second, entrepreneurial coaching has a positive effect on firm performance. Third, TQM soft practices have a positive effect on firm performance. So, entrepreneurial coaching may implicitly mediate the relationship between TQM soft practice and firm performance.

This paper helps the practitioner to understand how entrepreneurial coaching ensure TQM soft practice implementation and how entrepreneurial coaching affects firm performance.

To the best of the author’s knowledge, this paper presents an innovative approach since it is among the first research study that treats the relationship between entrepreneurial support and TQM soft practice implementation and especially the relationship between entrepreneurial coaching and the success of the TQM soft practices implementation.

Industry 5.0 (I5.0) is eventually set to supersede Industry 4.0 (I4.0), despite the fact that I4.0 continues to gain ground in emerging nations like India. Now India is aspiring to be a global manufacturing hub, and I5.0 offers enormous potential to position India as a forerunner in intelligent and collaborative manufacturing systems. Therefore, this research article aims to understand the relationship between I5.0 and sustainable manufacturing (SM) thoroughly; pinpoint its impact and implementation challenges; analyze its impact on Triple-Bottom-Line (TBL) sustainability; and present an inclusive framework for I5.0 implementation for Indian manufacturing enterprises.

The coexistence of two industrial revolutions raises questions, which necessitates debates and explanations. Thus, the systematic literature review (SLR) approach is used to address this issue and this study used Web of Science, Scopus, Science Direct and Google Scholar databases. Following a critical SLR, 82 research papers have been cited in this article, and the majority of cited articles were published from 2010 to 2022, to ensure a focused analysis of pertinent and recent scholarly contributions.

I4.0 is considered to be technology-driven, however, I5.0 is perceived to be value-driven. I5.0 is not a replacement or a chronological continuation of the I4.0 paradigm. The notion of I5.0 offers a distinct perspective and emphasizes the necessity of research on SM within the TBL sustainability boundaries. I5.0 introduces a new TBL: resilience in value creation, human well-being and sustainable society. Indeed, I5.0 seems to be economically, socially, and environmentally sustainable while manufacturing products with high productivity.

Theoretical implications pertain to restructuring business models and workforce transformation, whereas practical implications underscore the significance for manufacturing enterprises to embrace I5.0 for their sustainable development. By understanding the nuanced relationship between I5.0 and SM, enterprises can navigate implementation challenges, maximize TBL sustainability and embrace an inclusive I5.0 framework for high productivity and resilience.

The existing literature presents the general notion of I5.0 but lacks in-depth TBL sustainability analysis. This research used a systematic and rigorous SLR approach that evaluates the existing literature, enables an in-depth understanding, identifies research gaps and provides evidence-based recommendations for the decision-making process. Furthermore, this research aims to stand on an unbiased assessment, exploring theoretical and practical implications of I5.0 implementation for manufacturing enterprises and suggesting future research avenues.

Industrialisation has contributed to global environmental problems, especially in developed countries, but increasingly so in developing ones as well. The rising public concern for the natural environment is compelling business entities to revise their business models towards green lean (GL) management. Most manufacturing firms have realised that GL implementation is a critical factor that drives their success. Therefore, keeping in view the above said aspects, the purpose of this paper is to empirically assess the complementary impact of GL practices on environmental performance.

Data from a sample of 124 Indian manufacturing industries are analysed using a structural equation modelling technique.

Evidence suggests that GL practices such as top management commitment, government support, human resource management, health and safety of employees and public pressure and legislature have significantly positive effect on environmental performance of manufacturing industries.

The sample is limited to Indian manufacturing industries situated in northern region, with a low response rate.

Successful implementations of GL practices can lead to improved environmental performance. Manufacturing industries within emerging economies like India can improve on their GL practices by incorporating these findings into their business models, while research could be guided to focus their inquiries on this and related genres of scholarly work.

To the best of the authors’ knowledge, this study is one of the first to empirically assess the complementary impact of GL practices on environmental performance within the Indian context.

Resin-based friction materials are the most widely used key materials in industry for braking and transmission. However, the friction coefficient of resin-based friction materials significantly decreases at temperatures above 300°C, which reduces their friction performance.

This study combines elevated-temperature mechanical experiments with friction and wear experiments to explain the thermal degradation resistance performance and temperature recovery performance of resin-based friction materials. It also investigates the influence of friction material strength and worn morphology on the friction coefficient of materials at elevated temperature.

The experimental results show that the increase in friction coefficient of friction materials below 300°C is mainly due to the increase in worn morphology characterization parameters, and the thermal degradation phenomenon above 300°C is mainly due to the decrease of shear strength of friction film. Basalt fiber can significantly improve the thermal degradation resistance of friction materials. The friction coefficient of basalt fiber-reinforced specimens after thermal degradation reaches 0.421–0.443, which is 19–25% higher than the original. The thermal decay rate is 9.03–11.0%, which is 7.9–9.87% lower than the original. Moreover, the friction coefficient has good cooling recovery performance.

Revealed the thermal degradation mechanism of resin-based friction materials, verified that basalt fibers can improve the thermal degradation resistance of friction materials and provided reference for the development of new friction materials.

Industry 4.0 is recognised as a competitive strategy that helps implementers optimise their value chain. However, its adoption poses several challenges. This study investigates and ranks the drivers and barriers to implementing Industry 4.0 in the Thai sugar industry, the world's second-largest sugar exporter. It also evaluates the industry's readiness for Industry 4.0.

The drivers and impediments were identified based on a systematic literature review (SLR) and further investigated using a questionnaire, expert interviews, Pearson's correlation and nonparametric statistical analyses. The IMPULS model was used to assess the industry's readiness.

Most companies expect to minimise costs, develop employees and improve various elements of operational performance and data tracking capability. Thai sugar producers are still at a low readiness level to deploy Industry 4.0. High investment is the major challenge. Small businesses struggle to hire competent employees, collaborate with a highly credible technology provider and adapt to new solutions.

The findings can serve as a benchmark or guide for sugar manufacturers and companies in other sectors, where Industry 4.0 technologies are not yet widely utilised, to overcome existing roadblocks and make strategic decisions. They can also assist governments in developing policies that foster digital transformation and increase national competitiveness.

There is a scarcity of research on Industry 4.0 execution in the sugar industry. This study addresses this gap by investigating the reasons for the hesitancy of sugar producers to pursue Industry 4.0 and proposing solutions.

The advantages of offshoring are increasingly under scrutiny, and coronavirus disease 2019 (COVID-19) has advanced the debate, calling for a redefinition of firms' production location strategies. While attention has primarily focused on the relocation of second-degree strategies, such as back-shoring, near-shoring and further offshoring, there are also other alternatives, including home country-based domestic product and process innovations, and the development of new business activities. The objective of the authors' paper is to identify which factors influence decision-makers when they select and implement such post-offshoring strategic alternatives.

The authors consider 11 Italian manufacturing companies that implemented these strategies and analyze triggers, drivers, enabling factors and barriers of the decision phase, as well as content, governance mode and timing of the implementation phase.

Based on the collected findings, the authors suggest a set of propositions for further research. First of all, firms can simultaneously manage multiple strategies by adopting an ambidextrous approach through which to mitigate supply chain risks. They may integrate their domestic and international production activities, but the home country remains central for innovations and production of high-end products and Industry 4.0 technologies increases the probability of investing in their home country. At the same time, lack of competence induces selective near- and back-shoring, while full back-shoring is mainly a consequence of managerial mistakes. Competence availability acts as a barrier to relocation in the home country, inducing the implementation of either an insourcing strategy or a combination of insourcing and outsourcing.

The authors' work identifies post-offshoring as a dynamic process and provides insights into the post-pandemic scenario. The conceptual framework may represent a useful tool for company managers in re-evaluating their initial offshoring strategies.

Through the reconstruction of the events of some foreign entrepreneurs who worked in the territory of the Italian city of Bari in the first half of the 19th century, this paper aims to analyze the role of entrepreneurial migration in the economic development of Apulia land in this period.

This study adopts a theoretical framework that combines the concept of mixed embeddedness in a multifocal perspective, with the model of the diffusion of innovation focusing on the role of the so-called agency of actors, and of the network, in the dissemination of innovation. The theoretical framework is applied to multiple case studies to compare the evidence that emerged from the simultaneous analysis of several situations.

By analyzing how innovations have spread within the network of entrepreneurs of that time, it is possible to identify some relevant aspects related to the mechanisms of dissemination of innovations in the context of entrepreneurial migration. Specifically, the opportunity structure is intended in an even broader sense than indicated in the classic approach to mixed embeddedness: it is considered as the result of the joint interaction of the political, institutional and economic context of several places, and the behavioral dynamics of several groups.

Due to the specific method chosen, the outcomes of the research might apply to a narrow context. Therefore, the results need to be tested and confirmed in further empirical studies, and by applying multiple research methods.

Findings are useful and significant in the analysis of the link that exists between the diffusion of innovations and migrant entrepreneurship, and then the conclusions can be applied and extended to the current phenomenon of migration-related innovations, with specific reference to developing countries.

Findings can be applied and extended to the current phenomenon of migration-related innovations and highly skilled migration, with specific reference to developing countries.

This paper contributes to shed new light on the contextual and multifocal factors that influence the development of innovations in the networks of migrant entrepreneurship, in a specific historical period and a specific context. Combining social, human and financial capital with the wider opportunity structure, this study also provides a comprehensive understanding of the modalities through which migrant and high-skilled entrepreneurs could innovate.

The purpose of this paper is to test and develop a method for generation and selection of six sigma projects. This is done by testing the use of the generation and selection method for six sigma projects (GSM_SSP) in a Brazilian manufacturing industry with the participation of managers, aiming to gather the user’s perspective and improvement opportunities for the approach itself.

The work adopts the action research (AR) approach once the researchers were busily involved in the training, implementation and use of the GSM_SSP. The intervention was performed in on a series of 15 workshops, with a group of managers, during six months.

The application of the eight steps of the GSM_SSP approach assisted the company’s management team to generate nine project candidates and also to select three six sigma projects. This study also finds and discusses barriers and lessons learned used to improve the GSM_SSP.

This study presents an example of how six sigma project generation and selection has been applied to a manufacturing industry by adapting AR to the process using the eight steps of GSM_SSP, demonstrating how the management team was involved. This study should be replicated in different companies because AR is limited in its generalization.

To the best of the authors’ knowledge, this study represents the first use of AR methodology in six sigma project selection. This study contributes a method that can generate and select six sigma projects. In doing so, the research offers a simple approach that can be used by managers. In addition, the steps of the approach before selection were explored.

Industry 4.0 has offered significant potential for manufacturing firms to alter and rethink their business models, production processes, strategies and objectives. Manufacturing organizations have recently undergone substantial transformation due to Industry 4.0 technologies. Hence, to successfully deploy and embed Industry 4.0 technologies in their organizational operations and practices, businesses must assess their adoption readiness. For this purpose, a multi-dimensional analytical indicator methodology has been developed to measure Industry 4.0 maturity and preparedness.

A weighted average method was adopted to assess the Industry 4.0 readiness using a case study from a steel manufacturing organization.

The result revealed that the firm ranks between Industry 2.0 and Industry 3.0, with an overall score of 2.32. This means that the organization is yet to achieve Industry 4.0 mature and ready organization.

The multi-dimensional indicator framework proposed can be used by managers, policymakers, practitioners and researchers to assess the current status of organizations in terms of Industry 4.0 maturity and readiness as well as undertake a practical diagnosis and prognosis of systems and processes for its future adoption.

Although research on Industry 4.0 maturity models has grown exponentially in recent years, this study is the first to develop a multi-dimensional analytical indicator to measure Industry 4.0 maturity and readiness.

This paper aims to explore the research field of digital transformation in small and medium enterprises (SMEs), considering the importance of SMEs in the economic development of countries.

Considering the contributions of researchers and the challenges of SMEs to transform their business models, in this paper, the authors conducted a scientometric analysis using CiteSpace that included 448 documents indexed in Scopus.

The authors appreciated the growth in the number of publications that have studied the digital transformation process in SMEs, showing a niche of researchers interested in the flourishing research topic. Likewise, the authors identified the intention of SMEs to adopt digital technologies such as artificial intelligence, big data, cloud computing, data analytics, electronic commerce and the Internet of Things.

This paper is a valuable resource for academics and researchers in information systems, decision-makers in digital transformation in SMEs and governmental organisations concerned with digital technologies adoption in SMEs to achieve digital transformation and increase competitiveness and productivity.

This study used CiteSpace to conduct a scientometric analysis to explore how researchers have focused on frameworks and maturity models for measuring SME readiness, the impact of Industry 4.0 on SMEs, guides for helping managers evaluate their Industry 4.0 positioning, the development and implementation of digital business strategies for SMEs, the presentation of cases of SMEs that have driven digital transformation and future research opportunities.