Search results

Recent developments in the psychometric assessment of youth psychopathic traits suggest that the inclusion of a conduct disorder (CD) factor to the traditional three factors of the psychopathy construct may improve the incremental validity of these measures. The purpose of the current study is to examine whether the addition of a CD factor incrementally improves the ability of the Youth Psychopathic Traits Inventory Short version (YPI-S) to predict criminal recidivism.

A longitudinal quantitative research design was used with a sample detained male youth (N = 214, M_age = 16.4 years, SD_age = 1.3 years).

Results using the area under the curve analysis suggest that the inclusion of a CD factor slightly improves the capacity of the YPI-S to predict one-year general criminal recidivism, but it does not significantly increase its capacity to predict violent criminal recidivism. Results also indicate that a CD scale outperforms the YPI-S, even with an additional CD factor included, in terms of predicting one-year general and violent recidivism.

Self-reported youth psychopathic trait measures, even those that include a CD factor as a fourth factor, should be used with caution when the aim is to predict youth criminal recidivism.

To the best of the authors’ knowledge, this is the first study using a self-reported youth psychopathic traits measure with a CD factor to examine youth criminal recidivism.

This study aims to examine the influence of social media usage (SMU) on minimalist consumption and how the fear of missing out (FoMO) underlies this effect.

Four preregistered correlational/experimental studies (n = 1,763) are used. A pilot study (n = 436) examines the correlations between SMU, FoMO and minimalism. Studies 1 (n = 409), 2 (n = 415) and 3 (n = 503) further investigate the influence of SMU on minimalist consumption intentions, including mindful purchase, forgoing free products and decluttering, and test for evidence of mediation via FoMO by measuring or manipulating FoMO.

The results show that a high SMU makes consumers susceptible to FoMO, leading to impulsive purchases and careless product acquisition. However, when campaigners promote minimalism as a social media movement, they can activate FoMO, persuading consumers to practice decluttering.

Future research might examine how subjective age affects FoMO and minimalist consumption tendencies. Could campaigners use young social cues to make older consumers more susceptible to FoMO appeals? Could old social cues cause younger consumers to perceive greater social responsibility and to embrace minimalist consumption?

Minimalist lifestyles can promote sustainable consumption. This research provides insights into how SMU is a double-edged sword – it can cause FoMO users to disdain minimalism. However, it can promote minimalism if a minimalist campaign is strategically positioned as a social media movement using a FoMO-laden appeal.

Extant consumer behavior research on minimalism has just begun to investigate the antecedents of minimalist consumption. FoMO is conceptually related to minimalism, but the relationship between FoMO and minimalist consumption has not yet been empirically tested. This research fills these gaps by examining SMU and the associated FoMO as antecedents of minimalist consumption. Empirical evidence for the impact of SMU on various minimalist consumption behaviors and the mediating role of FoMO is provided.

The aim is to advance the conceptualisation of island entrepreneurship by investigating how the island context, for example, industry characteristics, social context and formal and informal institutions, influences the development of artisan food businesses in that context.

An applied, qualitative and participatory research approach was implemented. Data were collected during a business development process focusing on food artisans in the Åland Islands. In total, 19 business owners participated in the process. Key informants and public officers were interviewed, and the literature was reviewed. Interviews were analysed using phenomenography to identify representative categories, and the literature was analysed using content analysis.

Island characteristics and context, local institutions, the quality of social capital and gendered institutions influence business activities positively and negatively. Island entrepreneurship entails mobilising agencies to find innovative solutions that enable businesses to overcome obstacles. Most previous research treats business activities as entrepreneurship; however, as self-employment is essential in the island context, it should be highlighted in future studies.

This study illustrates how the island context influences the business development of small firms. Results indicate that local policies (1) benefitting female entrepreneurs, (2) supporting local businesses and (3) promoting locally produced artisan food could generate benefits for the entire artisan food businesses.

Local policies that (1) benefit female entrepreneurs, (2) support local businesses and (3) promote locally produced artisan food have the potential to generate benefits for the entire trade. Policies can benefit from an understanding of the role played by different ecosystem actors. Promoting self-employment can generate benefits for the local entrepreneurial ecosystem by providing agglomeration and helping to solve some challenges caused by the characteristics of islands.

Empirically, this research enhances the knowledge of post-productive responses in the island context. Theoretically, the study advances the conceptualisation of research on the island entrepreneurship context and the local food debate.

Titanium dioxide (TiO₂) has high opacity, high brightness and whiteness, owing to its high refractive index value. It is mainly used in the coating industry and continuous efforts have been made to replace some of the TiO₂ in paint with new pigments. This study aims to replace part of TiO₂ pigment with various percentages of BaSO₄, CaCO₃ and kaolin in styrene butyl acrylate-based paint formulations, without changing the properties of paints using only titanium dioxide.

To determine the optimum use rate of new pigment mixing, opacity, gloss, scrub resistance and weather resistance properties have been investigated in the water-based paint formulation. The morphological properties of these samples were examined by scanning electron microscopy analysis.

In the total color change (ΔE) measurements, it was observed that the sample coded 85Ti/15Ba produced extremely similar results to the situation when TiO₂ was used alone. It was seen that the best results were obtained when 85Ti/15Ba was used instead of TiO₂.

Comparison research on the impact of replacing TiO₂ with BaSO₄, CaCO₃ and kaolin on the performance characteristics of water-based styrene butyl acrylate-based paint formulations has not been done in the literature, according to the literature search.

Stab-resistant body armor (SRBA) is used to protect the body from sharp knives. However, most SRBA materials currently have the disadvantages of large weight and thickness. This paper aims to prepare lightweight and high-performance SRBA by 3D printing truss structure and resin-filling method.

The stab resistance truss structure was prepared by the fused deposition modeling method, and the composite structure was formed after filling with resin for dynamic and quasi-static stab tests. The optimized structural plate can meet the standard GA68-2019. Digital image correlation technology was used to analyze the local strain changes during puncture. The puncture failure mode was summarized by the final failure morphologies. The explicit dynamics module in ANSYS Workbench was used to analyze the design of the overlapped structure stab resistance process in this paper.

The stab resistance performance of the 3D-printed structural plate is affected by the internal filling pattern. The stab resistance performance of 3D-printed structural parts was significantly improved after resin filling. The 50%-diamond-PLA-epoxy, with a thickness of only 5 mm was able to meet the stab resistance standard. Resins are used to increase the strength and hardness of the material but also to increase crack propagation and reduce the toughness of the material. The overlapping semicircular structure was inspired by the exoskeleton structure of the demon iron beetle, which improved the stab resistance between gaps. The truss structure can effectively disperse stress for toughening. The filled resin was reinforced by absorbing impact energy.

The 3D-printed resin-filled truss structure can be used to prepare high-performance stab resistance structural plates, which balance the toughness and strength of the overall structure and ultimately reduce the thickness and weight of the SRBA.

This study aims to measure the level of satisfaction among women with childbirth services provided at public health facilities. Further, to analyse the impact of their socio-economic and obstetric characteristics on their level of satisfaction.

To accomplish these objectives a cross-sectional survey was conducted in two districts of an Indian state, Bihar. Structured questionnaire was developed based on the scale proposed by Okumu and Oyugi (2018) both for vaginal and caesarean birth patients. For empirical analysis multiple linear regression model was employed.

Results suggest that majority of mothers are satisfied with the care they received during childbirth, regardless of whether they chose a caesarean (55%) or vaginal delivery (53%). Women report the lowest levels of satisfaction with postpartum care and the privacy that was preserved by healthcare personnel at health facility. Further the study also confirms the association between patient’s socio-economic characteristics and their satisfaction level.

This is the first study of its kind to highlight the situation of public healthcare system in Bihar, which is the third most populated state in India with poor social and health indicators.