Search results

The purpose of this paper is to inspire a different way of thinking about digitalization and organizational change by theorizing simultaneity as an alternative to the otherwise dominant root metaphor of sequence in the literature on digitalization and organizational change.

The theoretical argument is based on a reading of central contributions to the literature on digital technology and organizational change, and particularly inspired by the work positing a constitutive entanglement of technology and organization. We argue for an extension of this line of thinking with a reading of Latour’s notion tonalities. The relevance of the theoretical argument is demonstrated through an illustrative empirical example of the phenomenon digital-ready legislation.

The paper identifies sequence as a root metaphor in the organization and digital change literature. It develops a simultaneity view and illustrates its relevance through the example of digital-ready legislation, pinpointing how technological, organizational and legal elements are attuned to one another at the same time rather than in sequence.

The sequentiality view has dominated the change management research, which has travelled from research into practice. The simultaneity view has the potential to offer a new approach to planning change, with a focus on the simultaneous alignment of, e.g. legal, organizational and technological elements.

The paper offers an alternative to dominant views on digitalization and organizational change, drawing on an overlooked notion in Latour’s scholarship, namely tonalities. This has potential to qualify the entanglement thesis and develop simultaneity as a new metaphor for understanding digital change.

This papers aims to study lattice structures in terms of geometric variables, manufacturing variables and material-based variants and their correlation with compressive behaviour for their application in a methodology for the design and development of personalized elastic therapeutic products.

Lattice samples were designed and manufactured using extrusion-based additive manufacturing technologies. Mechanical tests were carried out on lattice samples for elasticity characterization purposes. The relationships between sample stiffness and key geometric and manufacturing variables were subsequently used in the case study on the design of a pressure cushion model for validation purposes. Differentiated areas were established according to patient’s pressure map to subsequently make a correlation between the patient’s pressure needs and lattice samples stiffness.

A substantial and wide variation in lattice compressive behaviour was found depending on the key study variables. The proposed methodology made it possible to efficiently identify and adjust the pressure of the different areas of the product to adapt them to the elastic needs of the patient. In this sense, the characterization lattice samples turned out to provide an effective and flexible response to the pressure requirements.

This study provides a generalized foundation of lattice structural design and adjustable stiffness in application of pressure cushions, which can be equally applied to other designs with similar purposes. The relevance and contribution of this work lie in the proposed methodology for the design of personalized therapeutic products based on the use of individual lattice structures that function as independent customizable cells.

Polyurethane (PUR) foam parts are traditionally manufactured using metallic molds, an unsuitable approach for prototyping purposes. Thus, rapid tooling of disposable molds using fused filament fabrication (FFF) with polylactic acid (PLA) and glycol-modified polyethylene terephthalate (PETG) is proposed as an economical, simpler and faster solution compared to traditional metallic molds or three-dimensional (3D) printing with other difficult-to-print thermoplastics, which are prone to shrinkage and delamination (acrylonitrile butadiene styrene, polypropilene-PP) or high-cost due to both material and printing equipment expenses (PEEK, polyamides or polycarbonate-PC). The purpose of this study has been to evaluate the ease of release of PUR foam on these materials in combination with release agents to facilitate the mulding/demoulding process.

PETG, PLA and hardenable polylactic acid (PLA 3D870) have been evaluated as mold materials in combination with aqueous and solvent-based release agents within a full design of experiments by three consecutive molding/demolding cycles.

PLA 3D870 has shown the best demoldability. A mold expressly designed to manufacture a foam cushion has been printed and the prototyping has been successfully achieved. The demolding of the part has been easier using a solvent-based release agent, meanwhile the quality has been better when using a water-based one.

The combination of PLA 3D870 and FFF, along with solvent-free water-based release agents, presents a compelling low-cost and eco-friendly alternative to traditional metallic molds and other 3D printing thermoplastics. This innovative approach serves as a viable option for rapid tooling in PUR foam molding.

The purpose of this study, most recent advancements in threedimensional (3D) printing have focused on the fabrication of components. It is typical to use different print settings, such as raster angle, infill and orientation to improve the 3D component qualities while fabricating the sample using a 3D printer. However, the influence of these factors on the characteristics of the 3D parts has not been well explored. Owing to the effect of the different print parameters in fused deposition modeling (FDM) technology, it is necessary to evaluate the strength of the parts manufactured using 3D printing technology.

In this study, the effect of three print parameters − raster angle, build orientation and infill − on the tensile characteristics of 3D-printed components made of three distinct materials − acrylonitrile styrene acrylate (ASA), polycarbonate ABS (PC-ABS) and ULTEM-9085 − was investigated. A variety of test items were created using a commercially accessible 3D printer in various configurations, including raster angle (0°, 45°), (0°, 90°), (45°, −45°), (45°, 90°), infill density (solid, sparse, sparse double dense) and orientation (flat, on-edge).

The outcome shows that variations in tensile strength and force are brought on by the effects of various printing conditions. In all possible combinations of the print settings, ULTEM 9085 material has a higher tensile strength than ASA and PC-ABS materials. ULTEM 9085 material’s on-edge orientation, sparse infill, and raster angle of (0°, −45°) resulted in the greatest overall tensile strength of 73.72 MPa. The highest load-bearing strength of ULTEM material was attained with the same procedure, measuring at 2,932 N. The tensile strength of the materials is higher in the on-edge orientation than in the flat orientation. The tensile strength of all three materials is highest for solid infill with a flat orientation and a raster angle of (45°, −45°). All three materials show higher tensile strength with a raster angle of (45°, −45°) compared to other angles. The sparse double-dense material promotes stronger tensile properties than sparse infill. Thus, the strength of additive components is influenced by the combination of selected print parameters. As a result, these factors interact with one another to produce a high-quality product.

The outcomes of this study can serve as a reference point for researchers, manufacturers and users of 3D-printed polymer material (PC-ABS, ASA, ULTEM 9085) components seeking to optimize FDM printing parameters for tensile strength and/or identify materials suitable for intended tensile characteristics.

Considering the standards developed by the Sustainability Accounting Standards Board (SASB), this study aims to examine whether the link between material sustainability and financial performance depends on the extent to which the company is oriented toward stakeholders.

To test the predictions, 13,942 firm-year observations from 43 different countries are used, covering the period from 2010 to 2019. Using a hand-mapping approach to match the indicators suggested by the SASB with those of the ASSET4, the authors realize that there are 170 material sustainability indicators among 466 indicators of the ASSET4. The authors use three different methods to verify if the materiality matters, including the alphas obtained from the Fama and French factor models, comparing the average abnormal returns of the portfolios and the bootstrapped Cramer technique.

The findings show that companies investing in material sustainability activities perform better than those investing in immaterial activities. Also, consistent with the theoretical foundations, the authors find that the effect of investing in material sustainability activities is more pronounced in stakeholder-oriented countries than that in shareholder-oriented countries. The results are robust to a battery of sensitivity tests.

Owing to COVID-19 in late 2019, data from 2020 to 2022 have not been used to obtain reliable results.

The results obtained in the current research provide valuable guidance for investors to make investments considering the degree of materiality of sustainability activities in different industries. It also helps managers to increase the company’s financial performance, make efficient decisions related to investment in sustainability activities and find investment strategies on the material sustainability issues in their industries.

This study provides a clearer understanding of investment in sustainability activities in different industries by separating material and immaterial sustainability activities in stakeholder and shareholder-oriented countries, and the results obtained can change the perspective of investors and company managers regarding investing in such activities in different countries. Investing in more materiality sustainability activities than the immateriality dimension can be new opportunities for companies to achieve predetermined goals, help retain and attract business partners or be a source of innovation for new product lines or services. Internal morale and employee engagement may increase while increasing productivity and firm performance. This discussion opens the way for future research.

This study provides insight into the effect of investing in material and immaterial sustainability activities in different industries on the company’s performance in shareholder and stakeholder-oriented countries.

Firefighter Personal Protective Equipment (PPE) is the only barrier between the firefighter and hazardous environment. Gloves are a crucial component of the multi-component PPE. Over time the gloves have reduced the intensity of hand injuries, yet further improvement in terms of material selection and glove design is required to strike the balance between protection and comfort. Focusing on the material aspect, the purpose of this study is to present literature analysis on material selection and testing for firefighter gloves.

The study conducted a literature analysis on material selection and characterization of firefighter PPE. The review summarizes and evaluates past work addressing the characterization of firefighter gloves in accordance with NFPA 1971 requirements and points out found research gaps to aid with foundation of future research.

The study summarizes several research works to inform readers about the material selection and characterization of firefighter gloves. Based on the analyzed literature, the study resulted in material specification sheets for firefighter gloves. The developed material specification sheets provide information in terms of crucial material properties to be incorporated for accurate functioning of firefighter gloves, testing methods to validate those material properties and materials from analyzed literature exhibiting desired properties.

With large research addressing firefighter PPE, only limited studies focus specifically on gloves. Thus, this study provides a literature analysis covering material selection and testing for gloves. A consolidated firefighter gloves material specification document, which does not appear to be available in the literature, will provide a foundation for the development and characterization of firefighter gloves to better serve the functions along with ensuring user comfort.

The purpose of this paper is to compile a comprehensive status report on pipes/piping networks across different industrial sectors, along with specifications of materials and sizes, and showcase welding avenues. It further extends to highlight the promising friction stir welding as a single solid-state pipe welding procedure. This paper will enable all piping, welding and friction stir welding stakeholders to identify scope for their engagement in a single window.

The paper is a review paper, and it is mainly structured around sections on materials, sizes and standards for pipes in different sectors and the current welding practice for joining pipe and pipe connections; on the process and principle of friction stir welding (FSW) for pipes; identification of main welding process parameters for the FSW of pipes; effects of process parameters; and a well-carved-out concluding summary.

A well-carved-out concluding summary of extracts from thoroughly studied research is presented in a structured way in which the avenues for the engagement of FSW are identified.

The implications of the research are far-reaching. The FSW is currently expanding very fast in the welding of flat surfaces and has evolved into a vast number of variants because of its advantages and versatility. The application of FSW is coming up late but catching up fast, and as a late starter, the outcomes of such a review paper may support stake holders to expand the application of this process from pipe welding to pipe manufacturing, cladding and other high-end applications. Because the process is inherently inclined towards automation, its throughput rate is high and it does not need any consumables, the ultimate benefit can be passed on to the industry in terms of financial gains.

To the best of the authors’ knowledge, this is the only review exclusively for the friction stir welding of pipes with a well-organized piping specification detailed about industrial sectors. The current pipe welding practice in each sector has been presented, and the avenues for engaging FSW have been highlighted. The FSW pipe process parameters are characteristically distinguished from the conventional FSW, and the effects of the process parameters have been presented. The summary is concise yet comprehensive and organized in a structured manner.

The purpose of this paper is to present investigations on the significant influence of the tube material and fin density on fluid elastic instability and vortex shedding in a parallel triangular finned tube array subjected to water cross flow.

The experiment was conducted on finned tube arrays with a fin height of 6 mm and fin density of 3 fins per inch (fpi) and 9 fpi. A dedicated setup has been developed to examine fluid elastic instability and vortex shedding. Nine parallel triangular tube arrays with a pitch to tube diameter ratio of 1.78 were considered. The plain tube arrays, coarse finned tube arrays and fine finned tube arrays each of steel, copper and aluminium materials were tested. Plain tube arrays were tested to compare the results of the finned tube arrays having an effective tube diameter same as that of the plain tube.

A significant effect of fin density and tube material with a variable mass damping parameter was observed on the instability threshold. In the parallel triangular finned tube array subjected to water cross flow, a delay in the instability threshold was observed with an increase in fin density. For steel and aluminium tube arrays, the natural frequency is 9.77 Hz and 10.38 Hz, which is close to each other, whereas natural frequency of the copper tubes is 7.40 Hz. The Connors’ stability constant K for steel and aluminium tube arrays is 4.78 and 4.87, respectively, whereas it is 5.76 for copper tube arrays, which increases considerably compared to aluminum and steel tube arrays. The existence of vortex shedding is confirmed by comparing experimental results with Owen’s hypothesis and the Strouhal number and Reynolds number relationship.

This paper’s results contribute to understand the effect of tube materials and fin density on fluid elastic instability threshold of finned tube arrays subjected to water cross flow.

The PICCH research project contributes to opening a dialogue between cultural heritage archives and users. Hence, the users are identified and their information needs, the search strategies they apply and the search challenges they experience are uncovered.

A combination of questionnaires and interviews is used for collection of data. Questionnaire data were collected from users of three different audiovisual archives. Semi-structured interviews were conducted with two user groups: (1) scholars searching information for research projects and (2) archivists who perform their own scholarly work and search information on behalf of others.

The questionnaire results show that the archive users mainly have an academic background. Hence, scholars and archivists constitute the target group for in-depth interviews. The interviews reveal that their information needs are multi-faceted and match the information need typology by Ingwersen. The scholars mainly apply collection-specific search strategies but have in common primarily doing keyword searching, which they typically plan in advance. The archivists do less planning owing to their knowledge of the collections. All interviewees demonstrate domain knowledge, archival intelligence and artefactual literacy in their use and mastering of the archives. The search challenges they experience can be characterised as search system complexity challenges, material challenges and metadata challenges.

The paper provides a rare insight into the complexity of the search situation of cultural heritage archives, and the users’ multi-facetted information needs and hence contributes to the dialogue between the archives and the users.

This study aims to examine the mediating effects of corporate governance mechanisms like the board of directors on the association between disruptive technology adoption by audit clients and the risk of material misstatements, including inherent risk and control risk. In particular, the authors study the mediating effects of board characteristics such as board size, independence and gender diversity.

Based on a sample of 100 audit clients listed on the FTSE 100 from 2015 to 2021, this study uses structural equation modelling to test the research objectives.

The findings indicate a significant and negative association between disruptive technology adoption by audit clients and inherent risk. However, there is no significant evidence observed for control risk. The utilisation of disruptive technology by the audit client has a significant impact on the board characteristics, resulting in an increase in board size, greater independence and gender diversity. The authors also find strong evidence that board independence mediates the association between disruptive technology usage and both inherent risk and control risk. In addition, board size and gender exhibit distinct and differential mediating effects on the association and across the two types of risks.

The study reveals that the significant role of using disruptive technology by audit clients in reducing the risk of material misstatements is closely associated with the board of directors, which makes audit clients place greater emphasis on the construction of effective corporate governance.

This study offers essential primary evidence that can assist policymakers and standard setters in formulating guidance and recommendations for board size, independence and gender quotas, ensuring the enhancement of effective governance and supporting the future of audit within the next generation of digital services.

With respect to relevant stakeholders, it is imperative for audit clients to recognise that corporate governance represents a fundamental means of addressing the ramifications of applying disruptive technology, particularly as they pertain to inherent and control risks within the audit client.

This study contributes to the existing literature by investigating the joint impact of corporate governance and the utilisation of disruptive technology by audit clients on inherent risk and control risk, which has not been investigated by previous research.