Search results

This study aims to represent a novel closed-form solutions method based on the product of the exponential model to solve the inverse kinematics of a robotic manipulator. In addition, this method is applied to master–slave control of the minimally invasive surgical (MIS) robot.

For MIS robotic inverse kinematics, the closed-form solutions based on the product of the exponential model of manipulators are divided into the RRR and RRT subproblems. Geometric and algebraic constraints are used as preconditions to solve two subproblems. In addition, several important coordinate systems are established on the surgical robot and master–slave mapping strategies are illustrated in detail. Finally, the MIS robot can realize master–slave control by combining closed-form solutions and master–slave mapping strategy.

The simulation of the instrument manipulator based on the RRR and RRT subproblems is executed to verify the correctness of the proposed closed-form solutions. The fact that the accuracy of the closed-form solutions is better than that of the compensation method is validated by the contrastive linear trajectory experiment, and the average and the maximum tracking errors are 0.1388 mm and 0.3047 mm, respectively. In the animal experiment, the average and maximum tracking error of the left instrument manipulator are 0.2192 mm and 0.4987 mm, whereas the average and maximum tracking error of the right instrument manipulator are 0.1885 mm and 0.6933 mm. The successful completion of the animal experiment comprehensively demonstrated the feasibility and reliability of the master–slave control strategy based on the novel closed-form solutions.

The proposed closed-form solutions are error-free in theory. The master–slave control strategy is not affected by calculation error when the closed-form solutions are used in the surgical robot. And the accuracy and reliability of the master–slave control strategy are greatly improved.

Existing robot-assisted minimally invasive surgery (RMIS) system lacks of force feedback, and it cannot provide the surgeon with interaction forces between the surgical instruments and patient’s tissues. This paper aims to restore force sensation for the RMIS system and evaluate effect of force sensing in a master-slave manner.

This paper presents a four-DOF surgical instrument with modular joints and six-axis force sensing capability and proposes an incremental position mode master–slave control strategy based on separated position and orientation to reflect motion of the end of master manipulator to the end of surgical instrument. Ex-vivo experiments including tissue palpation and blunt dissection are conducted to verify the effect of force sensing for the surgical instrument. An experiment of trajectory tracking is carried out to test precision of the control strategy.

Results of trajectory tracking experiment show that this control strategy can precisely reflect the hand motion of the operator, and the results of the ex-vivo experiments including tissue palpation and blunt dissection illustrate that this surgical instrument can measure the six-axis interaction forces successfully for the RMIS.

This paper addresses the important role of force sensing and force feedback in RMIS, clarifies the feasibility to apply this instrument prototype in RMIS for force sensing and provides technical support of force feedback for further clinical application.

The paper aims to propose an assembly scheme based on master–slave coordination for a compliant dual-arm robot to complete a peg-in-hole assembly task.

The proposed assembly scheme is inspired by the coordinated behaviors of human beings in the assembly process. The left arm and right arm of the robot are controlled to move alternately. The fixed arm and the moving arm are distinguished as the slave arm and the master arm, respectively. The position control model is used at the uncontacted stage, and the torque control model is used at the contacted stage.

The proposed assembly scheme is evaluated through peg-in-hole assembly experiments with different shapes of assembly piece. The round, triangle and square assembly piece with 0.5 mm maximum clearance between the peg and the hole can be assembled successfully based on the proposed method. Furthermore, three assembly strategies are investigated and compared in the peg-in-hole assembly experiments with different shapes of assembly piece.

The contribution of this study is that the authors propose an assembly scheme for a compliant dual-arm robot to overcome the low positioning accuracy and complete the peg-in-hole assembly tasks with different shapes parts.

The purpose of this paper aims to design an optimization control for tunnel boring machine (TBM) based on geological identification. For unknown geological condition, the authors need to identify them before further optimization. For fully considering multiple crucial performance of TBM, the authors establish an optimization problem for TBM so that it can be adapted to varying geology. That is, TBM can operate optimally under corresponding geology, which is called geology-adaptability.

This paper adopted k-nearest neighbor (KNN) algorithm with modification to identify geological conditions. The modification includes adjustment of weights in voting procedure and similarity distance measurement, which at suitable for engineering and enhance accuracy of prediction. The authors also design several key performances of TBM during operation, and built a multi-objective function. Further, the multi-objective function has been transformed into a single objective function by weighted-combination. The reformulated optimization was solved by genetic algorithm in the end.

This paper provides a support for decision-making in TBM control. Through proposed optimization control, the advance speed of TBM has been enhanced dramatically in each geological condition, compared with the results before optimizing. Meanwhile, other performances are acceptable and the method is verified by in situ data.

This paper fulfills an optimization control of TBM considering several key performances during excavating. The optimization is conducted under different geological conditions so that TBM has geological-adaptability.

The purpose of this paper is to propose a novel event-triggered aperiodic intermittent sliding-mode control (ETAI-SMC) algorithm for master–slave bilateral teleoperation robotic systems to further save communication resources while maintaining synchronization precision.

By using the Lyapunov theory, a new event-triggered aperiodic intermittent sliding-mode controller is designed to synchronize master–slave robots in a discontinuous method. Unlike traditional periodic time-triggered continuous control strategy, a new ETAI condition is discussed for less communication pressure. Then, the exponential reaching law is adopted to accelerate sliding-mode variables convergence, which has a significant effect on synchronization performance. In addition, the authors use quantizers to make their algorithm have obvious progress in saving communication resources.

The proposed control algorithm performance is validated by an experiment developed on a practical bilateral teleoperation system with two PHANToM Omni robotic devices. As a result, the synchronization error is limited within a small range and the control frequency is evidently reduced. Compared with a conventional control algorithm, the experimental results illustrate that the proposed control algorithm is more sensitive to system states changes and it can further save communication resources while guaranteeing the system synchronization accuracy, which is more practical for real bilateral teleoperation robotic systems.

A novel ETAI-SMC for bilateral teleoperation robotic systems is proposed to find a balance between reducing the control frequency and synchronization control precision. Combining the traditional sliding-mode control algorithm with the periodic intermittent control strategy and the event-triggered control strategy has produced obvious effect on our control performance. The proposed ETAI-SMC algorithm helps the controller be more sensitive to system states changes, which makes it possible to achieve precise control with lower control frequency. Moreover, we design an environment contact force feedback algorithm for operators to improve the perception of the slave robot working environment. In addition, quantizers and the exponential convergence law are adopted to help the proposed algorithm perform better in saving communication resources and improving synchronization precision.

In any critical system, high‐availability of software components like web services has so far been achieved through replication. Three replication strategies known as active, passive, and hybrid, describe for example how many replicas are needed, where to locate replicas, and how replicas interact with the original web service and among themselves if needed. The purpose of this paper is to show how replicates could be substituted with components that are similarly functional to the component that needs back‐up in case of failure.

After examination of the different existing replication strategies, it was decided to test the suitability of the proposed web services high‐availability approach based on communities for each strategy. To this end, the specification of web services using two behaviors, namely control and operational, was deemed appropriate.

The active replication strategy is the only strategy that could support the development of a web services high‐availability approach based on communities of web services.

The proposed approach has been validated in practice by deploying a JXTA‐based testbed. The experimental work has implemented the active replication strategy.

Software component high‐availability could be achieved by components that are similarly functional to this component, which permits the common limitations of existing replication strategies to be addressed.

Robotic systems for laparoscopic minimally invasive surgery (MIS) always end up with highly sophisticated mechanisms and control schemes – making it a long and hard development process with a steep price. This paper aims to propose and realize a new, efficient and convenient strategy for building effective control systems for surgical and even other complex robotic systems.

A novel method that takes advantage of the modularization concept by integrating two middleware technologies (robot operating system and robotic technology middleware) into a common architecture based on the strengths of both was designed and developed.

Tests of the developed control system showed very low time-delay between the master and slave sides; good movement representation on the slave manipulator; and high positional and operational accuracy. Moreover, the new development strategy trial came with much higher efficiency and lower costs.

This method results in a modularized and distributed control system that is amenable to collaboratively develop; convenient to modify and update; componentized and easy to extend; mutually independent among subsystems; and practicable to be running and communicating across multiple operating systems. However, experiments show that surgical training and updates of the robotic system are still required to achieve better proficiency for completing complex minimally invasive surgical operations with the proposed and developed system.

This research proposed and developed a novel modularization design method and a novel architecture for building a distributed teleoperation control system for laparoscopic MIS.

According to UN estimates more than 2,000 people are killed or maimed every month by land‐mines. Although some mechanical solutions to their removal have been proposed, this is still heavily dependent on human manipulation. This study seeks to posit a robotic solution to this extremely hazardous operation.

Examines an active tele‐operated master‐slave robot hand system in which the master and slave hands have completely different structures.

A secure grasping strategy with a neuro‐fuzzy position control is optional, involving robust position control and accurate force control.

To the best of the authors' knowledge, the configuration and control system of the tele‐operation master‐slave robotic hand is novel in the applied robotics research field.

This paper recommends an improved design methodology for the slave half of teleoperator systems based on the notion of master‐slave symmetry. Traditional slaves consist of a conventional robot retrofitted with force‐torque sensors. The new methodology eliminates dependence on destabilizing force‐torque‐sensor schemes by augmenting existing master design methods with newly invented cable mechanisms. Design goals such as bandwidth, backdrivability, and force fidelity have been applied successfully to optimize design of the trajectory‐and‐force‐controllable Whole‐Arm Manipulation (WAM) robot. Although not yet used as the slave of a teleoperator system, the results from performance tests of the experimental WAM manipulator are promising. Finally, the authors suggest a new concept ‐ Whole‐Arm Haptics ‐ that is only possible with whole‐arm manipulation, where the user steers the kinematic redundancy directly. Whole‐Arm Haptics allow teleoperators to manipulate objects larger than the slave itself.

The purpose of this paper is to present a coordinated control strategy for stable walking of biped robot with heterogeneous legs (BRHL), which consists of artificial leg (AL) and intelligent bionic leg (IBL).

The original concentrated control in common biped robot system is replaced by a master‐slave dual‐leg coordinated control. P‐type open/closed‐loop iterative learning control is used to realize the time‐varying gait tracking for IBL to AL.

The new control architecture can simplify gait planning scheme of BRHL system with complicated closed‐chain mechanism and mixed driving mode.

Designing and constructing a suitable magneto‐rheological damper can greatly improve the control performance of IBL.

Master‐slave coordination strategy is suitable for BRHL stable walking control.

The concepts and methods of dual‐leg coordination have not been explicitly proposed in single biped robot control research before. Master‐slave coordinated control strategy is suitable for complicated BRHL.