Search results

In the cylinders of a marine diesel engine, self-ignition occurs in a very short time after the fuel injection into the combustion chamber. Therefore, this paper aims to develop a model of diesel fuel spray for the early stage of fuel spray in the marine diesel engine. The main technical aspects such as nozzle diameter of the marine engine injector and backpressure in the combustion chamber were taken into consideration.

In this paper, laboratory experimental studies were carried out to determine parameters of fuel spray in an early stage of injection in the marine diesel engine. The optical measuring Mie scattering technique was used to record the fuel injection process. The working space was a constant volume chamber. The backpressure parameters in the constant volume chamber were the same as during the operation of the marine diesel engine. Based on the experimental studies and important Hiroyasu and Arai models of fuel spray presented in literature was proposed new model of fuel spray parameters for marine diesel injectors.

In this paper, the proposed new model of the two main parameters described fuel spray evolution”: new model of spray tip penetration (STP) and spray cone angle (SCA). New model propagation of fuel STP in time was included the influence of nozzle diameter and backpressure. The proposed model has a lower error, about 15%–34%, than the model of Hiroyasu and Arai. Moreover, a new model of the evolution over time of the SCA is developed.

In the future research of fuel spray process must be taken influence of the fuel temperature. Diesel fuel has a different density and viscosity in dependence of fuel temperature. Therefore are predicted of the expansion about influence of fuel temperature, new model of fuel spray for a marine diesel engine. The main limitations occurring in the research are not possible to carry out the research while real operation marine diesel engine.

An experimental test was carried out for a real fuel injector of a marine diesel engine. Design parameters and fuel injection parameters were selected on the basis of the actual one. In the literature, SCA is defined as a constant parameter for the specific preliminary data. A new model for the early stage of fuel spray of SCA propagation in time has been proposed. The early stage of fuel spray is especially important, because in this time comes in there to fuel self-ignition.

This paper analyzes two external costs often associated with port development, cost to fisheries from marine dredge disposal and damages from air pollution, using estimates of development and operation for a proposed (but since cancelled) container port as a case study. For dredge disposal, a bio-economic model was used to assess short- and long-term and indirect (joodweb) damages to fisheries from marine disposal of clean sediments. In the case of air pollution, estimates of annual activity levels and emission coefficients are used to estimate incremental annual emissions of three key pollutants (NOx, HC and CO) for trucks, trains, yard vehicles, and vessels. These estimates allow for phasing in of strict new air pollution regulations. For both external costs, sensitivity analyses are used to reflect uncertainty. Estimates of shadow values in year 2002 dollars amount from $0.094 per cubic yard to $0.169 per cubic yard of clean dredged material for the selected disposal site and from $0.0584 per mile (jor current control standards) to $ 0. 0023 per mile (after phasing in of new regulations) for air pollution from heavy trucks.

A flexible model which is based on a Triangular intuitionistic flexibility ranking and aggregating (TIFRA) operator is proposed for failure detection and reliability management in a Wind Turbine system. The model which is employed when there are limited research data and valid source of information, uses expert-based knowledge/opinion for failure detection and reliability management. The results from the study concludes that, the most important area affected by failure with respect to the failure criteria used, includes; oil level sensor tilt sensors for tower installation and accelerometers for tower sway (A₂), Pressure sensor for blade monitoring (A₃), and the Pitch actuator (A₄). The main advantage of the proposed method is that it provides advanced information about faults that identifies the intensity of the system behavior also; the method provides a more complete view of the reliability management and root cause of failure in the Wind Turbine (WT) system using the flexibility parameter in the model.

Ports create harmful effects on their adjacent population because ships discharge noxious gases like SO_X, NO_X, and particulate matter (PM). To tackle this problem, some ports started to control emission through regulations such as Emission Control Areas (ECA) and Reduced Speed Zone (RSZ). This paper estimates the social cost of ship emission and eco-efficiency at the Port of Incheon (POI). We further examine how the ECA and RSZ designation can reduce the social cost. The estimation is based on the activity-based approach, where ship type, engine, and movement are used to measure fuel consumption and then emission. Results suggest that the social cost of ship emission at the POI amounts to $90,805,478. The eco-efficiency of the POI, compared to the one at the Port of Las Palmas in another study, is substantially better. Under RSZ, the corresponding emission abatement values are $4,485,308, $2,642,009 and $21,932,435 from SO₂, NO_X and PM reduction, respectively. If 1.0% and 0.1% sulfur fuel are used complying with rules of the ECA, the social cost savings amount to $8,174,947 and $12,868,842 from SO₂ reduction.

Shipping is a major source of air pollution, causing severe impacts on the environment and human health, greatly contributing to the creation of greenhouse gases and influencing climate change. The research was investigated to provide a better insight into the emission inventories in the Red River in Hanoi (Vietnam) that is often heavily occupied as the primary route for inner-city waterway traffic.

The total emissions of seven different pollutants (PM₁₀, PM_2.5, SO_x, CO, CO₂, NO_x and HC) were estimated using the SPD-GIZ emission calculation model.

The results show that CO₂ has the most significant contribution to the gas volume emitted: 103.21 tons/day. Remarkably, bulk carriers are the largest emission vehicle, accounting for more than 97% of total emissions, due to their superior number and large capacity.

The result to have a roadmap for making efforts to fulfil its commitment so that it could achieve its net-zero climate target by 2050 in Vietnam as committed at COP26.

In this research, the number of vehicles and types of vessels travelling on the Red River flowing within Hanoi territory and other activity data are reported. The tally data will be used to estimate emissions of seven different pollutants (PM₁₀, PM_2.5, SO_x, CO, CO₂, NO_x and HC) using a method combining both top-down and bottom-up approaches.

This research aims to study the economic conditions of fishermen living in the coastal area of Kabupaten Pesisir Selatan.

The method used is a descriptive analysis method supported by a participatory planning method. The importance of primary data is to understand deeply the real problems of fishermen in the field, collected by using a survey method such as field observations, in-depth interviews by gathering fishermen and related stakeholders in the area, undertaking forum group discussion, workshop and seminar. Secondary data are necessary to support the primary data analysis.

The results showed that there is an abundance of marine resources, but the economic condition of fishermen is far from expected. The income from fishing is not enough to feed their family's daily needs due to low catching productivity and raw fish selling price. The regency government and province do not have clear and concrete policies to resolve firmly and thoroughly the economic problems of fishermen living in the coastal areas.

This study succeeds in providing two breakthrough strategic policies to improve the economic conditions of fishermen, i.e. institutional and entrepreneurial innovations.

Both strategic policies have a mutual relationship. Therefore, the implementations have to integrate with one another and be executed simultaneously in a single coastal area management system.

Bupati as a top policymaker in this region must take full responsibility for the successful implementation of these two strategic policies.

Providing new ideas to solve the main problem of fishermen living in the coastal area in Indonesia.

This paper introduces a macro traffic flow model of carbon dioxide emissions from container ports. As long as both the throughput and the transshipment rate of the port are available, any port in the world can use it to estimate emissions. Initially, two Japanese container ports are used as reference points to derive the equivalent units of carbon dioxide per TEU for application to other ports. Then macro traffic flows within a container port are defined. Finally, carbon dioxide emissions from different container ports are estimated using the macro estimation procedure introduced in this paper. The results of trial estimations for selected ports among different countries highlight that the impacts of container ports on global warming are serious. This issue will be intensified if competition is increased by the larger container ports aspiring to be international mega hubs.

This paper presents a case study examining the emissions impacts of a modal shift from on-road trucks to rail for goods movement through the Southern California ports region, one of the severest non-attainment areas in terms of national air quality standards. Recent completion of the Alameda Corridor, a 20-mile rail expressway that connects the Ports of Long Beach and Los Angeles with rail mainlines near downtown Los Angeles, provides substantial reserve capacity for port traffic to be diverted from the severely congested road network to the rail line. On-road vehicles emissions were estimated using California mobile-source emissions model, ‘EMFAC’ that incorporates a set of emissions factors for each vehicle type and an estimate of vehicle activity. These emissions were then compared with the emissions generated from trains increased to carry freight volume diverted from truck traffic. On the basis of year 2000 traffic level, it was estimated that for a 20 percent modal shift of port traffic, mobile-source emissions can be reduced up to 0.86 tons for nitrogen oxides and 16 kg for particulate matter per day. The analysis results indicate that encouraging the modal shift for port-related freight traffic should be an integral part of overall air quality improvement initiatives for the study area.

Petroleum hydrocarbons are naturally occurring flammable fossil fuels used as conventional energy sources. It has carcinogenic, mutagenic properties and is considered a hazardous pollutant. Soil contaminated with petroleum hydrocarbons adversely affects the properties of soil. This paper aim to remove pollutants from the environment is an urgent need of the hour to maintain the proper functioning of soil ecosystems.

The ability of micro-organisms to degrade petroleum hydrocarbons makes it possible to use these microorganisms to clean the environment from petroleum pollution. For preparing this review, research papers and review articles related to petroleum hydrocarbons degradation by micro-organisms were collected from journals and various search engines.

Various physical and chemical methods are used for remediation of petroleum hydrocarbons contaminants. However, these methods have several disadvantages. This paper will discuss a novel understanding of petroleum hydrocarbons degradation and how micro-organisms help in petroleum-contaminated soil restoration. Bioremediation is recognized as the most environment-friendly technique for remediation. The research studies demonstrated that bacterial consortium have high biodegradation rate of petroleum hydrocarbons ranging from 83% to 89%.

Proper management of petroleum hydrocarbons pollutants from the environment is necessary because of their toxicity effects on human and environmental health.

This paper discussed novel mechanisms adopted by bacteria for biodegradation of petroleum hydrocarbons, aerobic and anaerobic biodegradation pathways, genes and enzymes involved in petroleum hydrocarbons biodegradation.

This systematic literature review focuses on the following future advanced information and communication technologies (ICTs) applied in the maritime transport of cargo: Internet of Things (IoT), big data, cloud computing and autonomous ships/vessels (including unmanned ships/vessels). The review question is: “RQ: In what context and by means of what mechanism does the implementation of future advanced ICTs have disruptive impact on maritime transport?”.

The paper complies with the methodological requirements of systematic reviews. The information analysis and synthesis are based on the CIMO logic, referring to the context (C), intervention (I), mechanism (M) and outcome (O) of the implementation of future advanced ICTs in maritime transport.

The review identifies the contextual factors and components of the mechanism that lead to the disruptive impact of different types of future advanced ICT interventions on maritime transport.

The review approaches only the most important future advanced ICTs that will disrupt maritime transport.

The maritime transport organizations should consider: intended outcome as intervention trigger; increased efficiency and responsiveness; benchmarking.

For the first time, the CIMO logic is applied in a systematic review focused on future advanced ICTs in maritime transport. The CIMO-DMT model is elaborated as a basis for further research. Ten directions of study are recommended in a future research agenda.