Search results

This paper aims to present the design of a compact quad-band coplanar-fed monopole antenna for tablet computer applications.

The antenna has the smallest size of 26 × 14 mm and supports GSM, Wi-Fi, WIMAX and Bluetooth. The proposed antenna consists of a coplanar fed main radiator, c-shaped stubs and parasitic meandered stub. The inverted c-shaped stubs enhance the bandwidth of upper frequencies. The resonance at 2.4 GHz is individually controlled by the coupled meandered stub.

The percentage bandwidth in the four operating bands are 8.7/4.12/27.8/13.3%. Furthermore, the antenna is integrated with the mock-up ground plane and specific absorption rate (SAR) calculations are performed. The estimated SAR is less than 1.6 W/kg for a 1 g body tissue. The gain and efficiency of the antenna are 3.56/4.37/4.97/6 dBi and 82.4/85/97.1/89.3%, respectively. The measured impedance and radiation characteristics of the fabricated prototype are in good correlation with the simulated results.

In the proposed work, vias and lumped elements are not used for lower band excitation, and most of the wireless applications in the tablet computers have been covered. Further, the effect of antenna with different orientation has been tested for the estimation of SAR.

The design, fabrication and experimental validation of defected microstrip structure (DMS) are proposed to address the problem of near-end crosstalk (NEXT) and far-end crosstalk (FEXT) between the microstrip transmission lines in a printed circuit board.

The proposed DMS evolved with the combination of spur line (L-shaped DMS) and U-shaped DMS topologies. This technique reduces the strength of electromagnetic coupling and suppresses crosstalk by optimizing the capacitive and inductive coupling ratio between the linked microstrip lines. The practical inductance value is much more significant in DMS than in defected ground structures (DGS), but the capacitance value remains the same.

A DMS unit is etched on the aggressor microstrip line instead of the DGS circuit. Because there is no leakage via the ground plane and the circuit size is far smaller than with DGS, the enclosure issue is disregarded. DMS structures have a larger effective inductance and are resistant to electromagnetic interference. A tightly coupled transmission line structure with minimal separation between the coupled microstrip line is designed using DMS. Further research must be conducted to improve the NEXT, FEXT and spacing between the transmission lines.

Simulation and actual measurement results show that the proposed DMS structure can effectively suppress crosstalk by analysing the S-parameters, namely, S_12, S_13 and S_14, with measured values of 1.48 dB, 20.65 dB and 21.099 dB, respectively. The data rate is measured to be 1.34 Gbps as per the eye diagram characterization. The results show that the NEXT and FEXT are reduced by approximately 20 dB in the frequency range of 1–11 GHz for mixed signals. The substantial measured results in the vector network analyser coincide with the computer simulation technology microwave studio suite simulation results.

The purpose of this paper is to design a suitable guard trace to reduce the electromagentic interference between two closely spaced high frequency transmission lines. A novel cross-shaped resonator combined via fence is passed down to alleviate far-end and near-end crosstalk (NEXT) in tightly coupled high-speed transmission lines. The distance between the adjacent transmission lines is increased stepwise as a function of trace width.

A rectangular-shaped resonator via fence is connected by a guard trace has been proposed to overcome the coupling between the traces that is separated by 2 W. Similarly, by creating a cross-shaped resonator via fence connected by guard trace that reduces the spacing further by 1.5 W.

A tightly coupled transmission line structure that needs separation by a designed unit cell structure. Further research needs to be conducted to improve the NEXT, far-end crosstalk (FEXT) and spacing between the transmission lines.

This study portrays a novel method that combines the resonators via fence with a minimum spacing between the tightly coupled transmission lines which reduce the NEXT and FEXT; thereby reducing the size of the routing area. The resultant test structures are characterized at high frequencies using time domain and frequency domain analysis. The following scattering parameters such as insertion loss, NEXT and FEXT of the proposed method are measured as 1.504 dB, >30 dB and >20 dB, respectively.