Search results

The purpose of this paper is to investigate the effect of reinforcement, inhomogeneity and initial stress on the propagation of shear waves. The problem consists of magneto poroelastic medium sandwiched between self-reinforced medium and poroelastic half space. Using Biot’s theory of wave propagation, the frequency equation is obtained.

Shear wave propagation in magneto poroelastic medium embedded between a self-reinforced medium and poroelastic half space is investigated. This particular setup is quite possible in the Earth crust. All the three media are assumed to be inhomogeneous under initial stress. The significant effects of initial stress and inhomogeneity parameters of individual media have been studied.

Phase velocity is computed against wavenumber for various values of self-reinforcement, heterogeneity parameter and initial stress. Classical elasticity results are deduced as a particular case of the present study. Also in the absence of inhomogeneity and initial stress, frequency equation is discussed. Graphical representation is made to exhibit the results.

Shear wave propagation in magneto poroelastic medium embedded between a self-reinforced medium, and poroelastic half space are investigated in presence of initial stress, and inhomogeneity parameter. For heterogeneous poroelastic half space, the Whittaker’s solution is obtained. From the numerical results, it is observed that heterogeneity parameter, inhomogeneity parameter and reinforcement parameter have significant influences on the wave characteristics. In addition, frequency equation is discussed in absence of inhomogeneity and initial stress. For the validation purpose, numerical results are also computed for a particular case.

This paper aims to investigate the mechanism of Ni particles distribution in the liquid Sn3.5Ag melt under the external static magnetic field. The control steps of Ni particles and the Sn3.5Ag melt metallurgical process were studied. After aging, the microhardness of pure Sn3.5Ag, Sn3.5Ag containing randomly distributed Ni particles and Sn3.5Ag containing columnar Ni particles were compared.

Place the sample in a crucible for heating. After the sample melts, place a magnet directly above and below the sample to provide a magnetic field. Sn3.5Ag with the different morphological distribution of Ni particles was obtained by holding for different times under different magnetic field intensities. Finally, pure Sn3.5Ag, Sn3.5Ag with random distributed Ni particles and Sn3.5Ag with columnar Ni particles were aged and their microhardness was tested after aging.

The experimental results show that with the increase of magnetic field strength, the time for Ni particle distribution in Sn3.5Ag melt to reach equilibrium is shortened. After aging, the microhardness of Sn3.5Ag containing columnar nickel particles is higher than that of pure Sn3.5Ag and Sn3.5Ag containing randomly distributed nickel particles. A chemical reaction is the control step in the metallurgical process of nickel particles and molten Sn3.5Ag.

Under the action of the magnetic field, Ni particles in Sn3.5Ag melt will be arranged into columns. With the increase of magnetic field strength, the shorter the time for Ni particles in Sn3.5Ag melt to arrange in a column. With the extension of the service time of the solder joint, if Sn3.5Ag with columnar nickel particles is used as the solder joint material, its microhardness is better than Sn3.5Ag with arbitrarily distributed nickel particles and pure Sn3.5Ag.

This research paper adopts the fundamental tenets of advanced technologies in industry 4.0 to monitor the structural health of concrete beam members using cost-effective non-destructive technologies. In so doing, the work illustrates how a coalescence of low-cost digital technologies can seamlessly integrate to solve practical construction problems.

A mixed philosophies epistemological design is adopted to implement the empirical quantitative analysis of “real-time” data collected via sensor-based technologies streamed through a Raspberry Pi and uploaded onto a cloud-based system. Data was analysed using a hybrid approach that combined both vibration-characteristic-based method and linear variable differential transducers (LVDT).

The research utilises a novel digital research approach for accurately detecting and recording the localisation of structural cracks in concrete beams. This non-destructive low-cost approach was shown to perform with a high degree of accuracy and precision, as verified by the LVDT measurements. This research is testament to the fact that as technological advancements progress at an exponential rate, the cost of implementation continues to reduce to produce higher-accuracy “mass-market” solutions for industry practitioners.

Accurate structural health monitoring of concrete structures necessitates expensive equipment, complex signal processing and skilled operator. The concrete industry is in dire need of a simple but reliable technique that can reduce the testing time, cost and complexity of maintenance of structures. This was the first experiment of its kind that seeks to develop an unconventional approach to solve the maintenance problem associated with concrete structures. This study merges industry 4.0 digital technologies with a novel low-cost and automated hybrid analysis for real-time structural health monitoring of concrete beams by fusing several multidisciplinary approaches into one integral technological configuration.

This paper presents an overview and discusses the applications of fibre reinforced polymer (FRP) bars as reinforcement in civil engineering structures. Following a discussion of the science underpinning their use, selected case studies where FRP reinforcement has been used are presented. The use of FRP reinforcement is rapidly gaining pace and may replace the traditional steel due to its enhanced properties and cost‐effectiveness. In addition, FRP reinforcement offers an effective solution to the problem of steel durability in aggressive environments and where the magnetic or electrical properties of steel are undesirable.

This paper aims to study the influence of different reinforcement methods on crack monitoring characteristics of eddy current array sensors, and the sensors with two different reinforcement methods, SUS304 reinforcement and permalloy reinforcement, are proposed.

First, the finite element model of the sensor is established to analyze the influence of the reinforcement plate’s electromagnetic parameters on the crack identification sensitivity. Then, the crack monitoring accuracy test of sensors with two reinforcement methods is carried out. Finally, the fatigue crack monitoring experiments with bolt tightening torques of 45 and 63 N · m are carried out, respectively.

In this study, it is found that the crack identification sensitivity of the sensor can be improved by increasing the relative permeability of the reinforcement plate. The crack monitoring accuracy of the sensors with two different reinforcement methods is about 1 mm. And the crack identification sensitivity of the sensor reinforced by permalloy reinforcement plate is significantly higher than that of the sensor reinforced by SUS304 reinforcement plate.

The sensor reinforced by reinforcement plate can work normally under the squeezing action of the bolt, and the crack monitoring sensitivity of the sensor can be significantly improved by using the reinforcement plate with high relative permeability.

The purpose of this study is stated regarding the impact of the horizontally polarized shear wave vibration on a composite medium in the terms of phase and damped velocity.

The assumed composite is composed of magneto-elastic fiber-reinforced (MEFR) layer constrained between heterogeneous viscoelastic layer and heterogeneous elastic half-space. The considered heterogeneity is associated with the directional rigidity and mass density in the uppermost layer and half-space of quadratic and trigonometric types, respectively. The coupled field equations related to the respective medium are solved analytically by employing the method of separation of variables.

The dispersion relation of the stated problem is secured by using the continuity assumptions, imposed at the stress-free surface and the interfaces of the expressed medium. The adopted numerical examples are used to compute the dispersion relation and plot the graphs between phase/damped velocity and wave number. Parametric studies on the phase and damped velocity yield five main conclusions: (1) Phase velocity decreases with increasing value of wave number and damped velocity increases up to a certain number and then starts falling simultaneously with increasing magnitude of wave number while keeping the rest parametric values fixed. (2) The presence of heterogeneity in the upper layer enhances the phase velocity and diminishes the damped velocity, but the presence of heterogeneity in the half-space enhances both the phase and damped velocity. (3) The appearance of reinforced parameters enhances the phase velocity for the considered crystalline graphite material and diminishes the phase velocity for the rest materials (carbon fiber-epoxy resin and steel) of the MEFR layer. Similarly, damped velocity decreases for the assumed crystalline graphite material of the MEFR layer and increases for the rest materials of the MEFR layer. (4) The induced dissipation factor due to viscoelastic property shows reversal decreasing and increasing effect on phase and damped velocity of SH-wave. (5) Ascending values of the angle at which the wave crosses the magnetic field increase the phase velocity and decrease the damped velocity for all the considered MEFR examples.

Till date, the mathematical modeling as well as vibrational analysis of wave propagation through the composite structure consisting of MEFR layer constrained between viscoelastic media and elastic half-space under the effect of different varying properties with depth remains a new challenging issue for the researchers around the globe. The current analysis is an approach to move ahead in the era of wave propagation in different realistic models based on their parametric studies. Also, these studies are very helpful to find their applications in the field of mechanical, construction, aerospace, automobile, biomedical, marine, manufacturing industries and many branches of science and technology where magnetic fields induced in elastic deformation occur.

The attractiveness of functionally graded composites lies in the possibility of a gradual spatial change of their properties such as hardness, strength and wear resistance. The purpose of this paper is to discuss the use of electromagnetic buoyancy to separate the reinforcement particles during the casting process of such a composite.

The basic problem encountered in the process of casting composites is to obtain electromagnetic buoyancy and simultaneously to avoid a flow of the liquid metal which destroys the desired composite structure. In this paper the authors present the methodology of numerical optimization of inductor geometry in order to homogenize the electromagnetic force field distribution.

The optimization method based on searching the solution subspace created by applying knowledge of the modelled process physics proved better than the universal local optimization methods. These results were probably caused by the complex shape of the criterion function hypersurface characterized by the presence of local minima.

Due to their characteristics, functionally graded composites are of great interest to the automotive, aerospace and defense industries. In the case of metal matrix composites casting techniques (as the presented one) are the most effective methods of producing functionally graded materials.

The paper presents the optimization of a new process of casting functionally graded composites in a low-frequency alternating electromagnetic field. The process involves problems that did not occur previously in the area of electromagnetic processing of materials. The paper proposes the use of special design of inductors to homogenize the electromagnetic force field.

During plasma disruption events in tokamaks, a large amount of magnetic energy is associated to the transfer of plasma current in eddy currents into the passive structures. In the paper, the influence of the in‐vessel design, in terms of magnetic shielding and electrical insulation, on the magnitude and the flow pattern of the eddy currents is investigated.

The purpose of this paper is to investigate the effect of initial stress and heterogeneity on the propagation of torsional waves in dissipative medium. The problem consists of dry sand poroelastic half-space embedded between heterogeneous self-reinforced half-space and poroelastic medium. The frequency equation is derived in the framework of Biot's theory with some variants.

Torsional wave propagation in dry sand poroelastic half-space embedded between self-reinforced half-space and poroelastic medium. All the constituents here are assumed to be dissipative, heterogeneous and initial stressed.

Phase velocity and attenuation are computed against wavenumber for various values of self-reinforcement parameter, inhomogeneity parameter and initial stress. Particular cases are discussed in absence of dissipation. The numerical results are presented graphically.

Initial stress and heterogeneity effects on torsional waves in dry sand half-space between reinforced half-space and poroelastic medium are investigated. The frequency equation is derived, and which intern gives the phase velocity and attenuation coefficient for various values of initial stress, self-reinforcement parameter and heterogeneity parameter. From the numerical results, it is clear that as wavenumber varies phase velocity and attenuation are periodic in nature for all the cases. Particular cases are discussed in absence of dissipation. This kind of analysis can be extended to any elastic solid by taking magnetic, thermo and piezoelectric effects into account.

This paper discusses the lower concentration reinforcement of cathodic ultrafine ceramic particulates, on metal matrices like Zn, Al and alloy‐matrices like Cu Zn, Cu Mn, Al Zn and Ni‐P‐B alloy‐electrodeposits, etc. It is assumed that these ultrafine ceramic particulates in lower concentration‐range are effective in covering the anodic grain‐boundary networks and other anodic‐defect sites, such that there is an effective reduction of surface anodic‐current. It is shown that at a critical threshold particulate concentration, the surface dissolution is minimum, followed by a drastic increase above that concentration. Such increase in dissolution is attributed to the random dispersion of the particulates on the grain‐proper, as these cannot be accommodated within the anodic grain‐boundary channels, micro‐voids and other defect sites. As such they form stress‐raiser points and enhance surface dissolution. This paper also discusses the correlation of the grain boundary structures, particulate trapping capacity of the matrix and the galvanic stress factors due to random distribution of particulates.