Search results

The purpose of this paper is to design a modified version of the double sampling plan to handle the inspection processes requiring a minimum sample size to assure the median life for the products under the new Weibull–Pareto distribution. The economic design of the proposed plan is also considered to assure the product's lifetime with minimum cost.

The authors have developed an optimization model for obtaining the required plan parameters by solving simultaneously two non-linear inequalities and such inequalities have been formed based on the two points on the operating characteristic curve approach.

The results show that the average sample number, average total inspection and total inspection cost under the proposed plan are smaller than the same of a single sampling plan. This means that the proposed plan will be more efficient than a single sampling plan in reducing inspection effort and cost while providing the desired protection.

The proposed modified double sampling plan designed to assure the median life of the products under the new Weibull–Pareto distribution is not available in the literature. The proposed plan will be very useful in assuring the product median lifetime with minimum sample size as well as minimum cost in all the manufacturing industries.

Artificial fruit ripening is hazardous to mankind. In the recent past, artificial fruit ripening is increasing gradually due to its commercial benefits. To discriminate the type of fruit ripening involved at the vendors’ side, there is a great demand for on-sight ethylene detection in a nondestructive manner. Therefore, this study aims to deal with a comparison of various laboratory and portable methods developed so far with high-performance metrics to identify the ethylene detection at fruit ripening site.

This paper focuses on various types of technologies proposed up to date in ethylene detection, fabrication methods and signal conditioning circuits for ethylene detection in parts per million and parts per billion levels. The authors have already developed an infrared (IR) sensor to detect ethylene and also developed a lab-based setup belonging to the electrochemical sensing methods to detect ethylene for the fruit ripening application.

The authors have developed an electrochemical sensor based on multi-walled carbon nanotubes whose performance is relatively higher than the sensors that were previously reported in terms of material, sensitivity and selectivity. For identifying the best sensing technology for optimization of ethylene detection for fruit ripening discrimination process, authors have developed an IR-based ethylene sensor and also semiconducting metal-oxide ethylene sensor which are all compared with literature-based comparable parameters. This review paper mainly focuses on the potential possibilities for developing portable ethylene sensing devices for investigation applications.

The authors have elaborately discussed the new chemical and physical methods of ethylene detection and quantification from their own developed methods and also the key findings of the methods proposed by fellow researchers working on this field. The authors would like to declare that the extensive analysis carried out in this technical survey could be used for developing a cost-effective and high-performance portable ethylene sensing device for fruit ripening and discrimination applications.

The primary purpose of this study is to examine the factors leading to shopping cart abandonment and construct a model depicting interrelationship among them using interpretive structural modeling (ISM) and Matriced Impact Croises Multiplication Appliquee an un Classement (MICMAC).

Initially, 20 factors leading to shopping cart abandonment were extracted through a systematic literature review and expert opinions. Fifteen factors were finalized using the importance index and CIMTC method, for which consistency has been checked in SPSS software through a statistical reliability test. Finally, ISM and MICMAC approach is used to develop a model depicting the contextual relationship among finalized factors of shopping cart abandonment.

The ISM model depicts a technical glitch (SC8), cash on delivery not available (SC4), bad checkout interface (SC9), just browsing (SC11), and lack of physical examination (SC12) are drivers or independent factors. Additionally, four quadrants have been formulated in MICMAC analysis based on their dependency and driving power. This facilitates technical managers of e-commerce companies to focus more on factors leading to shopping cart abandonment according to their dependency and driving power.

Taking an expert’s opinion as a base may affect the results of the study due to biases based on subjectivity.

This study’s outcomes would accommodate practitioners, researchers, and multinational or national companies to indulge in e-commerce to anticipate factors restricting the general public from online shopping.

For the successful running of an e-commerce business and to retain the confidence of e-shoppers, every e-commerce company must make a strategy for controlling factors leading to shopping cart abandonment at the initial stage. So, this paper attempts to highlight the main factors leading to shopping cart abandonment and interrelate them using ISM and MICMAC approaches. It provides a clear path to technical heads, researchers, and consultants for handling these shopping cart abandonment factors.

The purpose of this paper is to explore the effect of ZnO on the structure and properties of micro-arc oxidation (MAO) coating on rare earth magnesium alloy under large concentration gradient.

The macroscopic and microscopic morphology, thickness, surface roughness, chemical composition and structure of the coating were characterized by different characterization methods. The corrosion resistance of the film was studied by electrochemical and scanning Kelvin probe force microscopy. The results show that the addition of ZnO can significantly improve the compactness and corrosion resistance of the MAO coating, but the high concentration of ZnO will cause microcracks, which will reduce the corrosion resistance to a certain extent.

When the concentration of zinc oxide is 8 g/L, the compactness and corrosion resistance of the coating are the best, and the thickness of the coating is positively correlated with the concentration of ZnO.

Too high concentration of ZnO reduces the performance of MAO coating.

The MAO coating prepared by adding ZnO has good corrosion resistance. Combined with organic coatings, it can be applied in corrosive marine environments, such as ship parts and hulls. To a certain extent, it can reduce the economic loss caused by corrosion.

The effect of ZnO on the corrosion resistance of MAO coating in electrolyte solution was studied systematically, and the conclusion was new to the common knowledge.

The Gulf Cooperation Council (GCC) of countries has some of the highest electricity consumptions and carbon dioxide emissions per capita in the world. This poses a direct challenge to the GCC government’s ability to meet their CO₂ reduction targets. In this review paper the current household electricity consumption situation in the GCC is reviewed.

Three scenarios for reducing energy consumption and CO₂ emissions are proposed and evaluated using strengths, weaknesses, opportunities and threats (SWOT) as well as the political, economic, social, technical, legal and environmental (PESTLE) frameworks.

The first scenario found that using solar Photovoltaic (PV) or hybrid solar PV and wind system to power household lighting could save significant amounts of energy, based on lighting making up between 8% to 30% of electricity consumption in GCC households. The second scenario considers replacement of conventional appliances with energy-efficient ones that use around 20% less energy. The third scenario looks at influencing consumer behavior towards sustainable energy consumption.

Pilot trials of these scenarios are recommended for a number of households. Then the results and feedback could be used to launch the schemes GCC-wide.

The proposed scenarios are designed to encourage responsible electricity consumption and production within households (SDG12).

All three proposals are found viable for policymakers to implement. However, to ensure successful implementation GCC Governments are recommended to review all the opportunities and challenges associated with these schemes as laid out in this paper.

Road transport is an important sector of the economy, however, its negative impacts on the environment, human health and sustainability of potential economic growth are significant. Transport externalities tend to be neglected within the market process. The damage generated through significant externalities of road transport in Czechia was identified, based on unique data processing, to reach almost 3.5 billion € annually. This chapter presents an overview of internalization taxes and fees, their current rates and generated receipts. If excise duty is disregarded as fundamentally unsuitable for the internalization of externalities, then the receipts from other applied taxes and fees, particularly the road tax, seem to be insufficient. Although economic growth is encouraged, its form is not sustainable in view of the rising phase of the Kuznets curve and the related irreversible environmental impacts.

This study aims to comparatively analyze the cut parts obtained as a result of cutting the Ni-based Inconel 625 alloy, which is widely used in the aerospace industry, with the wire electro-discharge machining (WEDM) and abrasive water jet machining (AWJM) methods in terms of macro- and microanalyses.

In this study, calipers, Mitutoyo SJ-210, Nikon SMZ 745 T, scanning electron microscope and energy dispersive X-ray were used to determine kerf, surface roughness and macro- and microanalyses.

Considering the applications in the turbine industry, it has been determined that the WEDM method is suitable to meet the standards for the machinability of Inconel 625 alloy. In contrast, the AWJM method does not meet the standards. Namely, while the kerf angle was formed because the hole entrance diameters of the holes obtained with AWJM were larger than the hole exit diameters, the equalization of the hole entry and exit dimensions, thanks to the perpendicularity and tension sensitivity of the wire electrode used in the holes drilled with WEDM ensured that the kerf angle was not formed.

It is known that the surface roughness of the parts used in the turbine industry is accepted at Ra = 0.8 µm. In this study, the average roughness value obtained from the successful drilling of Inconel 625 alloy with the WEDM method was 0.799 µm, and the kerf angle was obtained as zero. In the cuts made with the AWJM method, thermal effects such as debris, microcracks and melted materials were not observed; an average surface roughness of 2.293 µm and a kerf of 0.976° were obtained.

Propaganda is a prevalent technique used in social media to intentionally express opinions or actions with the aim of manipulating or deceiving users. Existing methods for propaganda detection primarily focus on capturing language features within its content. However, these methods tend to overlook the information presented within the external news environment from which propaganda news originated and spread. This news environment reflects recent mainstream media opinions and public attention and contains language characteristics of non-propaganda news. Therefore, the authors have proposed a graph-based multi-information integration network with an external news environment (abbreviated as G-MINE) for propaganda detection.

G-MINE is proposed to comprise four parts: textual information extraction module, external news environment perception module, multi-information integration module and classifier. Specifically, the external news environment perception module and multi-information integration module extract and integrate the popularity and novelty into the textual information and capture the high-order complementary information between them.

G-MINE achieves state-of-the-art performance on both the TSHP-17, Qprop and the PTC data sets, with an accuracy of 98.24%, 90.59% and 97.44%, respectively.

An external news environment perception module is proposed to capture the popularity and novelty information, and a multi-information integration module is proposed to effectively fuse them with the textual information.

This systematic literature review analyzes the academic literature to understand SC risk and resilience across different organizational sizes and industries. The academic literature has well discussed the causes of supply chain (SC) risk events, the impact of SC disruptions, and associated plans for SC resilience. However, the literature remains fragmented on the role of two fundamental elements in achieving SC resilience: the firm's size and the firm's industry as firms' contingent factors. Therefore, it is important to investigate and highlight SC resilience differences by size and industry type to establish more resilient firms.

Building upon the contingent resource-based view of the firm, the authors posit that organizational factors such as size and industry sector have important roles in developing organizational resilience capabilities. This systematic literature review and analysis is based on the structural and systematic analysis of high-ranked peer-reviewed journal papers from January 2000 to June 2021 collected through three global scientific databases (i.e. ProQuest, ScienceDirect, and Google Scholar) using relevant keywords.

This systematic literature review of 230 high-quality articles shows that SC risk events can be categorized into demand, supply, organizational, operational, environmental, and network/control risk events. This study suggests that the SC resilience plans developed by startups, small and mdium-sized enterprises (SMEs), and large organizations are not necessarily the same as those of large enterprises. While collaboration and networking and risk management are the most crucial resilience capabilities for all firms, applying lean and quality management principles and utilizing information technology are more crucial for SMEs. For large firms, knowledge management and contingency planning are more important.

This study provides a comprehensive review of the literature on SC resilience plans across different organizational sizes and industries, offering new insights into the nature and dynamics of startups', SMEs', and large enterprises' SC resilience in different industries. The study highlights the need for further investigation of SC risk and resilience for startups, SMEs, and different industries on a more detailed level using empirical data. This study’s findings have important implications for researchers and practitioners and guide the development of effective SC resilience strategies for different types of firms.

Neo-institutional theories and their constructs have so far only received limited attention in supply chain management literature. As recent supply chain disruptions and their ripple effects affect actors on a broader institutional level, supply chains are confronted with multiple new and emerging, often conflicting, institutional demands. This study aims to unpack the notion of institutional complexity behind supply chain disruptions and present a novel institutional framework to lower supply chain susceptibility and increase supply chain resilience.

The authors identify the patterns of complexity that shape the supply chain susceptibility, namely, distance, diversity and ambiguity, and present three institutional responses to susceptibility to increase supply chain resilience, namely, institutional entrepreneurship, institutional alignment and institutional layering.

This paper analyses the current situational relevance to better understand the various and patterned ways how logics influence both supply chain susceptibility and the supply chain resilience. The authors derive six propositions on how complexity can be reduced for supply chain susceptibility and can be increased for supply chain resilience.

By expanding and extending research on institutional complexity to supply chains, the authors broaden how researchers in supply chain management view supply chain susceptibility, thereby providing managers with theory to think differently about supply chains and its resilience.