Search results

Two sets of formulations based on three copolymer and three terpolymer systems involving tributyltin methacrylate(BTMA),methyl methacrylate(MMA) and acrylonitrile (AN) with variable tin contents of 7, 15 and 22% were prepared. There is only one varient in each formulation of the six prepared, that is the type of organotin polymer whether it is a copolymer or terpolymer of a definite tin content 7 or 15 or 22%. The binder mixture is a blend consisting of the organotin polymer, a vinyl copolymer and its external plasticizer and little amount of rosin. A moderate and fixed amount of cuprous oxide was introduced into all formulations as a supplementary toxin with organotin polymer. Leaching rates of micro amounts of copper and tin were determined. Panel exposure test in the sea was performed at Port Said. Best antifouling efficiency was obtained from formultions containing organotin copolymer or terpolymer of 22% tin content and that containing organotin copolymer of 15% tin.

The effect of pigment filler and extender on the antifouling efficiency of six compositions containing organotin polymer is studied. The binder mixture is a blend containing a copolymer of tri‐n‐butyltin methacrylate and methylmeth acrylate (OTP) with 22% tin content, a vinyl copolymer with its external plasticizer and little amount of rosin. Cuprous oxide was added as a supplementary toxin with the OTP. Leaching rates of microamounts of copper and tin were determined for a period of nearly one year applying standard techniques. Painted plates were immersed in Suez Canal waters at Port‐Said for more than 36 months. Comparison between different fillers and extenders on the antifouling behaviour of painted surfaces is shown. Compositions containing cellite and china clay exhibited the maximum antifouling performance.

To organotin polymer systems were prepared based on the reaction of tri‐n‐butyltin methacrylate with methyl methacrylate ad acrylonitrile. Tin content of the polymers was about 22% and the physical properties of the organotin polymer films were investigated. The anti‐fouling potential of the prepared polymers was investigated as unpigmented and pigmented coatings at Alexandria and Port‐Said. Compositions containing vinyl copolymer as a co‐resin as well as cuprous oxide as a supporting toxin showed good antifouling performance for more than three years.

Three copolymer and three terpolymer systems involving tributyltin methacrylate, methyl methacrylate and acrylonitrile were prepared with variable tin content of 7, 15 and 22%. The structure of the organotin polymers was investigated by the elemental analysis of tin and nitrogen and by infrared spectroscopy. Long‐term leaching rate determinations of tin from the organotin polymer films were studied and were in the range of 0.033–0.045 ?g Sn/cm2/day. The antifouling performance of the prepared polymer varnishes was tested at Ismailia and at Alexandria. Tributyltin methacrylate‐methyl methacrylate copolymer with tin content of 22% exhibited the highest antifouling potential for more than 18 months.

An organotin copolymer with tin content of 22% was prepared by the reaction of methyl methacrylate and tri‐n‐butyltin methacrylate. The prepared copolymer was incorporated into a paint formulation containing cuprous oxide as an external toxin. Laboratory evaluation of the formulation showed that the average value of the leaching rate of Cu was 7 µg/cm2/day, while the leaching rate of tin was found to be in the range of 0.033 µg/cm2/day. The antifouling performance of the prepared formulation was tested as painted areas on the hull of a trading ship. After about one year's running period through the Mediterranean and Red Sea harbours the tested areas showed good antifouling efficiency compared with the commercial antifouling paint.

Details the preparation of emulsion copolymerization of styrene (St)‐vinylacetate (VAc) with different molar ratio 33:67(A1), 50:50(A2) and 67:33(A3) using redox initiator system (k2S208/NaHS03) and investigates their film forming. Finds that the drying film characterization took on a brittle property which is attributed to the nature of styrene polymers. Explains that molar ratio 67:33 from butyl acrylate (BuA‐VAc) and vinyl acetate (B1, B2 and B3) in the presence of pluronic F87 was chosen as the coemulsifier as it gives good transparent and elastic film properties but has a tacky character owing to the nature of butyl acrylate polymer. Shows that styrene‐butylacrylate (St‐BuA) 67:33 molar ratio(C) has high conversion and a solid content of 51 per cent, and its film forming gives a transparent sheet that dries within 45 minutes. Notes that incorporation of these latices into interior and exterior coatings gives good characterization (hardness, ductility, adhesion and washability of 4,042 cycles) compared with the standard specifications for evaluation of latex paint.

Larostate 520, a cost‐effective antistat providing superior lubricity, humectancy and electrical conductivity is now available from Jordan Chemical Company, here.

The current status of nanotechnology research and development in Jordan is analyzed. In recent years, Jordanian institutions demonstrated considerable interest in the development and production of nanotechnology. Here the purpose of this paper is to provide detailed information about the status of nanotechnology in Jordan in terms of several factors that influence selectivity in nanotechnology and the number of published peer-reviewed research articles.

Several factors that influence selectivity in nanotechnology and the number of published peer-reviewed research articles were analyzed. A detailed analysis of the collected data reveals that the number of publications, citations, and patents is highly dependent on the amount of research fund.

The development in nanotechnology is associated with presence and accessibility of sensitive laboratory equipment. The nanotechnology research output in Jordan is still lower than it should be due to the lack of necessary laboratory infrastructure. This is due to the insufficient funds allocated to scientific research, the restrictive access to available instruments and the bureaucracy of some governmental departments. Compared to some developed countries, Jordan is noticeably behind in developing a nanotechnology system of research and industry. It will take time as well as technical and financial resources in order to achieve an advanced level in the field of nanotechnology in Jordan. Nevertheless, many Jordanian researchers are doing their best and are producing some good research articles.

The many applications to the same approach.

Time and publications’ resources.

Peer cooperation.

First comprehensive review ever. A base for researchers and decision makers.

This paper aims to investigate the optimization of window and shading designs to reduce the building energy consumption of a standard office room while improving occupants' comfort in Tehran and Auckland.

The NSGA-II algorithm, as a multi-objective optimization method, is applied in this study. First, a comparison of the effects of each variable on all objectives in both cities is conducted. Afterwards, the optimal solutions and the most undesirable scenarios for each city are presented for architects and decision-makers to select or avoid.

The results indicate that, in both cities, the number of slats and their distance from the wall are the most influential variables for shading configurations. Additionally, occupants' thermal comfort in Auckland is much better than in Tehran, while the latter city can receive more daylight. Furthermore, the annual energy use in Tehran can be significantly reduced by using a proper shading device and window-to-wall ratio (WWR), while building energy consumption, especially heating, is negligible in Auckland.

To the best of the authors' knowledge, this is the first study that compares the differences in window and shading design between two cities, Tehran and Auckland, with similar latitudes but located in different hemispheres. The outcomes of this study can benefit two groups: firstly, architects and decision-makers can choose an appropriate WWR and shading to enhance building energy efficiency and occupants' comfort. Secondly, researchers who want to study window and shading systems can implement this approach for different climates.

The purpose of this sudy is to provide a complete optimization-based methodology to design waveguides with metamaterial walls. The present methodology is based on optimization. Indeed, the inverse problems of design are formulated as nonlinear black-box optimization problems with constraints. Two inequality black-box constraints are taken into account as penalized terms that are added to the objective function when the constraints are not satisfied. The numerical steps are done by using a finite element method solver (GetDP). Thus, different optimization software are tested to solve the nonlinear black-box optimization problems such as IPOPT, NLOPT and NOMAD from the Opti ToolBox in MatLab.

In this work, a methodology to design waveguides with metamaterial walls is proposed. The aim is to solve an inverse problem to find the best design where the electric field cartography is the closest to an imposed one.

The present methodology is applied to solve inverse problems of design and satisfactory results were provided by the three solvers IPOPT, NLOPT and NOMAD. Those numerical experiments show that NOMAD is the most efficient method to optimize the design of those cylindrical waveguide structures with metamaterial walls.

The model is set to find solutions using a specific pattern of metamaterials. This is promising to take those geometries as variables of the optimization problems. Moreover, in this exploratory work, no constraint on the fabrication limits has been taken into account.

The originality is to formulate design problems of waveguide with metamaterial walls into optimization problems. These optimization problems are difficult to solve because the objective function and two inequality constraints are computed via a numerical simulation code based on finite element methods. Thus, an original approach based on penalization is implemented and three optimization software are used. Hence, the authors propose an optimization-based methodology and apply to solve two inverse problems of design.