Search results

Through this study, four different types of woven fabric structures were created by using cotton/banana blends with a 70:30 ratio by varying the weaving specifications. This study aims to investigate the comfort and mechanical properties of these woven materials.

Taguchi L16 experimental design (5 factors and 4 levels) with response surface methodology tool was used to optimize mechanical and comfort characteristics. The yarn samples used in this study are cotton/banana with a blend ratio of 70:30. Fabric type (A), grams per square metre (GSM; B), yarn count (C), fabric thickness (D) and cloth cover factor (E) are the chosen process characteristics.

The highest tensile strength and tearing strength of the cotton/banana blended fabric samples were obtained as 326.3 N and 90.3 k.gf/cm, respectively. Similarly, the highest thermal conductivity and overall moisture management capacity values were found to be 0.6628 and 3.06 W/mK X10⁻⁴, respectively. The optimized process parameters for obtaining maximum mechanical properties were using canvas fabric structure, 182 GSM, 36^s Ne yarn count, 0.48 mm fabric thickness and 23.5 cloth cover factor. Similarly, the optimized process parameters for obtaining maximum comfort properties were achieved using a twill fabric structure, 182 GSM, 32^s Ne yarn count, 0.4 mm fabric thickness and 23 cloth cover factor.

In contrast to synthetic fabrics, banana fibre and its blended materials are significant ecological solutions for apparel and functional clothing. Products made from banana fibre are a sustainable and green alternative to conventional fabrics. Banana fibre obtained from the pseudostem of the plant has an appearance similar to ramie and bamboo fibres. Numerous studies showed that banana fibre could absorb significant moisture and be spun into yarn through ring and rotor spinning technology. On the other hand, this fibre can be easily combined with cotton, jute, wool and synthetic fibre. The present utilization of pseudostem of banana plant fibre is very minimal. This type of research improves the usability of bananas their blended fabrics as apparel and functional wear.

This paper aims to analyse how financial literacy (FL) is conceptualised and operationalised in the Indian context.

A systematic literature review (SLR) was conducted using the Preferred Reporting Items for Systematic Reviews and Meta-analyses (PRISMA) protocol. Thirty-six articles published between 2010 and 2020 were considered for analysis. The FL conceptualisation was examined based on knowledge, ability, skill, attitude and confidence elements. The FL operationalisation was analysed using the modified version of the Organisation for Economic Co-operation and Development’s (OECD) Programme for International Student Assessment (PISA) 2012 model for organising the domain for an assessment framework.

The findings indicate that, despite offering operationalisation details of the FL, 13 out of 36 studies did not include a conceptual definition of FL. Of the 23 studies that mentioned a conceptual definition, 87% are primarily focused on the “knowledge” element and only 39% have combined knowledge, ability/skill and attitude elements in defining FL. As in the developed countries, the Indian studies also preferred investment/saving-related contents in their FL measures. The volume of content focusing on the financial landscape is meagre amongst the FL measures used in India and developed countries. The survey instruments of most studies have been designed in the individuals’ context but have failed to measure the extent to which individuals apply the knowledge in performing their day-to-day financial transactions. Further, it was found that 20 out of 36 studies did not convert the FL level of their target groups into a single indicator or operational value.

To the best of our knowledge, this is the first study that explores the FL’s assessment practices in India. Further, this study offers new insights by comparing the contents of FL measures used in Indian studies with those used in developed countries.

Through bibliometric analysis, the study intends to reveal the evolution of the trends in the Scopus database, the scope of research and the connection between technology and entrepreneurship.

This study uses a comprehensive science mapping approach, integrating network visualisation to map research groups, bibliometric analysis to measure publication trends and thematic analysis to identify overarching themes. This study uses a thorough technique to examine the complex interaction between technology and entrepreneurship from 2000 to 2023. The collection includes information from various sources, creating a corpus of 2,207 documents. These sources include 698 scholarly journals, books and other publications.

According to the report, the interest in technology and entrepreneurship is expanding. The three nations conducting the most study on this subject is the USA, the UK and Italy. Some of the top writers in this area include James A. Cunningham, Alison N. Link and David B. Audretsch.

The study found possibilities and problems associated with the interaction between technology and entrepreneurship. Additionally, the study found several research holes in this area. The study also noted some research gaps in this field, including those related to the sustainability of society and the environment, the effects of entrepreneurship on inequality and the difficulties faced by entrepreneurs in underdeveloped nations.

This study thoroughly overviews the business and technology sectors. It outlines some of the difficulties that must be overcome whilst identifying the main research trends in this field. Researchers, decision-makers and businesspeople interested in using technology for entrepreneurial endeavours can all benefit from the study’s findings.

This study’s dataset’s scope, which might not include all pertinent publications, is one of its limitations. Nevertheless, the results add to a thorough picture of the state of the profession and recent developments. This study’s insights are valuable for researchers, policymakers and entrepreneurs interested in leveraging technology for entrepreneurial pursuits.

The research points to a number of directions that need more inquiry, such as in-depth studies into the social and environmental implications of technology-driven entrepreneurship and methods to combat inequality.

The purpose of this paper is to compile a comprehensive status report on pipes/piping networks across different industrial sectors, along with specifications of materials and sizes, and showcase welding avenues. It further extends to highlight the promising friction stir welding as a single solid-state pipe welding procedure. This paper will enable all piping, welding and friction stir welding stakeholders to identify scope for their engagement in a single window.

The paper is a review paper, and it is mainly structured around sections on materials, sizes and standards for pipes in different sectors and the current welding practice for joining pipe and pipe connections; on the process and principle of friction stir welding (FSW) for pipes; identification of main welding process parameters for the FSW of pipes; effects of process parameters; and a well-carved-out concluding summary.

A well-carved-out concluding summary of extracts from thoroughly studied research is presented in a structured way in which the avenues for the engagement of FSW are identified.

The implications of the research are far-reaching. The FSW is currently expanding very fast in the welding of flat surfaces and has evolved into a vast number of variants because of its advantages and versatility. The application of FSW is coming up late but catching up fast, and as a late starter, the outcomes of such a review paper may support stake holders to expand the application of this process from pipe welding to pipe manufacturing, cladding and other high-end applications. Because the process is inherently inclined towards automation, its throughput rate is high and it does not need any consumables, the ultimate benefit can be passed on to the industry in terms of financial gains.

To the best of the authors’ knowledge, this is the only review exclusively for the friction stir welding of pipes with a well-organized piping specification detailed about industrial sectors. The current pipe welding practice in each sector has been presented, and the avenues for engaging FSW have been highlighted. The FSW pipe process parameters are characteristically distinguished from the conventional FSW, and the effects of the process parameters have been presented. The summary is concise yet comprehensive and organized in a structured manner.

The purpose of this study is to analyse the characteristics of cellulose fibres derived from the pseudo-stems of Curcuma longa and to evaluate the properties of non-woven fabric produced using these fibres.

The fibres were extracted via a decortication method. The acquired intrinsic qualities of the fibres were used to assess the feasibility of using them in textile applications. The thermal bonding approach was used for the development of the non-woven fabric, using a hot press machine with low-melt polyester fibre as a binder.

The mean length of Curcuma longa fibres was determined to be 52.73 cm, with a fineness value of 4.00 tex. The fibres exhibited an uneven cross-sectional morphology, characterized by a diverse range of oval-shaped lumens. The fibre exhibited a tenacity of 1.45 g/denier and an elongation value of 4.30%. The fibres possessed a moisture regain value of 11.30%. The experimental non-woven fabrics had consistent weight and thickness, while exhibiting different properties in terms of tensile strength and air permeability, with Fabric C having the highest tensile strength and the lowest air permeability value.

The features of Curcuma longa fibre, obtained with the decortication process, exhibited suitability for textile applications. Three experimental non-woven fabrics comprising different compositions of Curcuma longa fibre and low-melt polyester fibre were produced. The tensile strength and air permeability properties of these fabrics were influenced by the composition of the fibres.

This study aims to manufacture alternative window shutters using waste cotton fabrics by stiffening using polyvinyl acetate (PVA) with vinyl acrylic binder solutions.

The manufactured fabrics were evaluated for their tensile strength, drapeability, bending length by weight and color fastness to light. And finally, an analysis of variance was done for each parameter.

As the percent of PVA with a vinyl acrylic solution and the number of layers increased, the tensile strength, drape coefficient (percent), bending length (cm), and color fastness to light increased in both directions. The percent of PVA with a vinyl acrylic solution and the number of layers are statistically significant for each response such as tensile strength, drape coefficient (percent), bending length (cm), color fastness to light and water repellency at a 95% confidence interval. Tensile strength, drape coefficient (%) and bending length (cm) are always greater in the warp direction than in the weft direction. The tensile strength, drape coefficient (percent), bending length (cm) and color fastness to light of treated fabrics samples are greater than those of the untreated fabrics.

The factory waste fabrics can be recycled into window shutters which will provide the cheaper raw material for window shutter manufacturers.

Eri is a short-stapled fibre that possesses an excellent soft feel and warmness to the wearer. Investigation of thermal comfort and moisture properties of Eri silk fabric provides the enhanced commercial scope for Eri silk-based clothing.

To examine the impact of process factors on thermal and moisture properties, three different single knit Eri silk structures were made, each with a different loop length and yarn count. Three different linear densities of Eri silk spun yarn (15, 20 and 25 tex) were selected. Three distinct knitted constructions, including plain jersey, popcorn and cellular blister, were created, along with two different loop lengths.

The novel cellular blister structure has shown appreciable thermal comfort properties than the other two structures. Yarn fineness and loop length were significant with most of the thermal comfort properties.

In recent times the Eri silk production is completely domesticated, so the new demand can easily be met by the producers. This research will create a new scope for Eri silk fibres in sportswear and leisure wear.

This study was conducted to explore the influence of knit structure, loop length and yarn count on the thermal comfort properties of the clothing.

Eri silk fiber has superior thermal insulation behavior, better softness than cotton fiber. However, Eri silk’s use in the commercial arena has not yet taken off. The purpose of the study is to explore the comfort properties of the fabric, which enhances the commercial acceptance of Eri silk clothing.

In this investigation, three different single knit Eri silk structures were produced with different loop lengths and yarn counts to analyze the influence of process variables on low-stress mechanical properties. To execute the research work, Eri silk spun yarn of three different linear densities (15 tex, 20 tex, 25 tex) were chosen. Three different knitted structures were produced, such as single jersey, popcorn and cellular blister, and two different loop lengths were also selected.

The cellular blister structure has shown appreciable low-stress properties next highest position was attained by the popcorn structure. Yarn fineness and loop length were significant with most of the low-stress properties.

The findings of this research will contribute to a greater awareness of Eri silk knitted fabric and its process parameters in relation to its commercial utility.

This study was conducted to explore the influence of knit structure, loop length and yarn count on the low-stress properties of Eri silk-based thermal clothing.

This study aims to investigate the effects of the number of miss stitches and tuck stitches in the knit structure on the technological parameters and physical and mechanical properties of knitted fabrics.

The number of miss stitches and tuck stitches was increased from 3.6% to 8.3%, and the influence of this increase on knitwear properties was analyzed.

It was found that an increase from 3.6% to 8.3% leads to a decrease in the stretchability of knitwear in width from 330% to 290% and in length from 112% to 95%. With an increase from 5% to 6.3%, the surface density of knitwear decreases by 11.6 g. And with an increase from 6.3% to 8.3%, the surface density of knitwear decreases by 11.8 g. It was also found that the presence of miss stitches and tuck stitches in the knit structure reduces the material consumption, and the presence of miss stitches increases the shape stability of the knitted fabric.

It was concluded that the number of miss stitches and tuck stitches has the strongest influence on surface density, followed by volume density.

Recently, the Government of India has emphasized digital financial inclusion for promoting cashless transactions with a vision to transform India from a traditional cash-based economy into a cashless economy. Technology-driven payment apps are facilitated greater access to cashless financial services and improve the speed, efficiency, accuracy and effectiveness of financial transactions. This study aims to explore the determinants of quick response (QR) code mobile payment (m-payment) adoption intention among marginalized street vendors in India.

The proposed research model was tested using 320 responses from QR code m-payment users. An interview schedule was performed using the structured questionnaire from marginalized street vendors by adopting a purposive sampling technique. The proposed research framework of this study developed on the Unified Theory of Acceptance and Use of Technology (UTAUT). In addition to the existing variables proposed in the UTAUT model, three more variables have been added, namely, digital financial literacy (DFL), personal innovativeness (PI) and perceived trust (PT). Besides, the study used confirmatory factor analysis and structural equation modeling techniques to analyze the data.

This study confirms that factors such as performance expectancy, effort expectancy, facilitating conditions, PT and customers’ DFL are significant determinants of street vendors’ intention to use QR code m-payment services. However, social influence and PI have shown an insignificant relationship with adopting a QR code m-payment system.

The results provide insights for policymakers and service providers. Specifically, government and bankers design promotional campaigns emphasizing the ease of use, perceived benefits, security and faster business transactions to accept and use the QR code m-payment system to encourage prospective users to achieve a cashless economy.

Many prior studies have widely concentrated on m-payment adoption intention in India. However, only a few studies have attempted to examine the factors influencing the adoption of QR code m-payment services among merchants from emerging economies. There is a dearth of studies on QR code adoption from an unorganized sector perspective, specifically marginalized street vendors. Therefore, this study explicitly examines the extent to which the determinants of adoption intention toward QR code-based m-payment services among marginalized street vendors within the framework of the extended UTAUT model by incorporating DFL, PI and PT. The findings of this study contribute, theoretically and practically, to the existing literature.