Search results

The purpose of this paper is to numerically investigate the flow characteristics and extend the data of friction factor and Reynolds number product of hydrodynamically developing laminar flow in three-dimensional rectangular microchannels with different aspect ratios.

Using a finite-volume approach, the friction factor characteristics of Newtonian fluid in three-dimensional rectangular ducts with aspect ratios from 0.1 to 1 are conducted numerically under no-slip boundary conditions. A simple model that approximately predicts the apparent friction factor and Reynolds number product f_appRe is referenced as a semi-theoretical fundamental analysis for numerical simulations.

The accurate and reliable results of f_appRe are obtained, which are compared with classic numerical data and experimental data, and the simple semi-theoretical model used and all comparisons show good agreement. Among them, the maximum relative error with the classic numerical data is less than 3.9 per cent. The data of f_appRe are significantly extended to other different aspect ratios and the novel values of f_appRe are presented in the tables. The characteristics of f_appRe are analyzed as a function of a non-dimensional axial distance and the aspect ratios. A more effective and accurate fourth-order fitting equation for the Hagenbach's factor of rectangular channels is proposed.

From the reliable data, it is shown that the values of f_appRe and the model can be references of pressure drop and friction factor for developing laminar flow in rectangular channels for researchers and engineering applications.

This paper aims to provide an overview of Keller’s ARCS (attention, relevance, confidence and satisfaction) model of motivational design and explores how three instruction librarians at different institutions have integrated the model into their teaching practices to improve student motivation during information literacy (IL) sessions.

Case studies describe how instruction librarians began to incorporate the ARCS model into library instruction. Three librarians used self-reflective practice and a range of assessment techniques to evaluate and improve teaching practice.

ARCS is valuable for improving student engagement during IL instruction. The authors suggest best practices for learning about and integrating the model and propose instructional strategies that align with it.

This paper fills a gap in literature on practical applications of motivational design in library instruction and suggests best practices for teaching and assessment using the ARCS model.

This paper aims to investigate the consequence of the combined impacts of an induced magnetic field and thermal radiation on peristaltic transport of a Carreau nanofluid in a vertical tapered asymmetric channel. The model applied for the nanofluid comprises the effects of Brownian motion and thermophoresis.

The governing equations have been simplified under the widespread assumption of long-wavelength and low-Reynolds number approximations. The reduced coupled nonlinear equations of momentum and magnetic force function have also been solved analytically using the regular perturbation method.

The physical features of emerging parameters have been discussed by drawing the graphs of velocity, temperature, nanoparticle concentration profile, magnetic force function, current density, heat transfer coefficient and stream function. It has been realized that the magnetic force function is increased with the increase of Hartmann number, magnetic Reynolds number and mean flow rate.

It may be first paper in which the effect of induced magnetic field on peristaltic flow of non-Newtonian nanofluid in a tapered asymmetric channel has been studied.

The purpose of this paper is to study the thermal and flow characteristics of a single annually finned-tube condenser. The velocity and the temperature field inside the fin channel are revealed. Changes of the heat transfer and the flow resistance for typical fin configurations are analyzed. The optimal combinations of the fin dimension in terms of the enhancement of heat transfer are suggested.

The problem has been numerically investigated with the FLUENT software. K-ɛ model is applied in the solution of the turbulent cases. The local and the average feature of the thermal performance and the friction factor are determined. Furthermore, the effect of the fin spacing, the fin height, and the fin thickness on the heat transfer and the flow resistance are verified.

The numerical results reveal that the fin spacing is the most influential factor of all fin dimensions not only to the heat transfer but also to the flow resistance. Both the heat transfer and the flow resistance are compared with those related data available in the public literature. On the other hand, the fin height and the fin thickness affect the heat transfer of the condenser in a much less significant way in comparison to that of the fin spacing.

This paper provides some meaningful information of the fin-dimensional effect on the heat transfer and the flow resistance for a single finned tube condenser. For such kind of heat exchanger, the heat transfer coefficient, the friction factor, and the heat transfer amount per unit length tube are all important to describe the performance feature.

The purpose of this study is to show the procedure, application and main features of the hybrid numerical-analytical approach known as generalized integral transform technique by using it to study magnetohydrodynamic flow of electrically conductive Newtonian fluids inside flat parallel-plate channels subjected to a uniform and constant external magnetic field.

The mathematical formulation of the analyzed problem is given in terms of a streamfunction, obtained from the Navier–Stokes and energy equations, by considering steady state laminar and incompressible flow and constant physical properties.

Convergence analyses are performed and presented to illustrate the consistency of the integral transformation technique. The results for the velocity and temperature fields are generated and compared with those in the literature as a function of the main governing parameters.

A detailed analysis of the parametric sensibility of the main dimensionless parameters, such as the Reynolds number, Hartmann number, Eckert number, Prandtl number and electrical parameter, for some typical situations is performed.

Mixed convection heat transfer in ventilated cavities submitted to a constant heat flux has been numerically studied using the Navier‐Stokes equations with the Boussinesq approximation. Results in terms of streamlines and isotherms are produced for different values of the governing parameters, namely, the Rayleigh number (10³ ≤q Ra ≤q 10⁶) and the Reynolds number (5 ≤q Re ≤q 5, 000). The geometrical parameters are the aspect ratio of the cavity A = L^’/H^’ = 2 and the relative height of the openings B = h^’/H^’ = 1/4. Results of the simulations show that the maximum interaction between natural and forced convection occurs for couples (Ra, Re) which can be correlated as Re = a Ra^b.

Maintaining the turbine blade’s temperature within the safety limit is challenging in high-pressure turbines. This paper aims to numerically present the conjugate heat transfer analysis of a novel approach to mini-channel embedded film-cooled flat plate.

Numerical simulations were performed at a steady state using SST k – ω turbulence model. Impingement and film cooling are classical approaches generally adopted for turbine blade analysis. The existing film cooling techniques were compared with the proposed design, where a mini-channel was constructed inside the solid plate. The impact of the blowing ratio (M), Biot number (Bi) and temperature ratio (TR) on overall cooling performance was also studied.

Overall cooling effectiveness was always shown to be higher for mini-channel embedded film-cooled plates. The effectiveness increases with increasing the blowing ratio from M = 0.3 to 0.7, then decreases with increasing blowing ratio (M = 1 and 1.4) due to lift-off conditions. The mini-channel embedded plate resulted in an approximately 21% increase in area-weighted average overall effectiveness at a blowing ratio of 0.7 and Bi = 1.605. The lower uniform temperature was also found for all blowing ratios at a low Biot number, where conduction heat transfer significantly impacts total cooling effectiveness.

To the best of the authors’ knowledge, this study presents a novel approach to improve the cooling performances of a film-cooled flat plate with better cooling uniformity by using embedded mini-channels. Despite the widespread application of microchannels and mini-channels in thermal and fluid flow analysis, the application of mini-channels for blade cooling is not explored in detail.

This work presents a numerical study of the dynamic and thermal behavior of a turbulent flow in a shell and tube heat exchanger equipped with a new design of baffle type wing. The implementation of this type of baffle makes it possible to lengthen the path of the fluid in the shell, to increase the heat flux exchanged on the one hand and is to capture the weakness of the shell and tube heat exchanger with segmental baffles on the other hand.

This paper aims to analyze numerically the thermo-convective behavior of water using CFD technique by solving the conservation equations of mass, momentum and energy by the finite volume method based on the SIMPLE algorithm for coupling velocity-pressure. To describe the turbulence phenomenon, the Realizable k–ε model is employed. The analysis is done for different mass flow rates. The parameters studied are: the fluid outlet temperature, the average heat transfer coefficient, the pressure drop, the total heat transfer rate, the effect of the geometric shape of the baffle on the thermal behavior. The purpose of this study is to propose a new design of a shell and tube heat exchanger with a high heat transfer coefficient and a lower pressure drop compared to a shell and tube heat exchanger with transverse and segmental baffles.

The results showed that the use of the wing baffles enhanced the heat transfer coefficient significantly and reduced the friction coefficient. Compared with segmental baffles, the wing baffles are 11.67, 18.53 and 11.5 per cent lower in the pressure drop and 1.79, 1.9 and 2.39 per cent higher in the Nusselt number for the three mass flow rates 0.5, 1 and 2 kg/s, respectively.

The originality of this work lies in proposing a three-dimensional analysis for a novel heat exchanger.

The purpose of this study, thermal radiation and viscous dissipation impacts on double diffusive convection on peristaltic transport of Williamson nanofluid due to induced magnetic field in a tapered channel is examined. The study of propulsion system is on the rise in aerospace research. In spacecraft technology, the propulsion system uses high-temperature heat transmission governed through thermal radiation process. This study will help in assessment of chyme movement in the gastrointestinal tract and also in regulating the intensity of magnetic field of the blood flow during surgery.

The brief mathematical modelling, along with induced magnetic field, of Williamson nanofluid is given. The governing equations are reduced to dimensionless form by using appropriate transformations. Numerical technique is manipulated to solve the highly nonlinear differential equations. The roll of different variables is graphically analyzed in terms of concentration, temperature, volume fraction of nanoparticles, axial-induced magnetic field, magnetic force function, stream functions, pressure rise and pressure gradient.

The key finding from the analysis above can be summed up as follows: the temperature profile decreases and concentration profile increases due to the rising impact of thermal radiation. Brownian motion parameter has a reducing influence on nanoparticle concentration due to massive transfer of nanoparticles from a hot zone to a cool region, which causes a decrease in concentration profile· The pressure rise enhances due to rising values of thermophoresis and thermal Grashof number in retrograde pumping, free pumping and copumping region.

To the best of the authors’ knowledge, a study that integrates double-diffusion convection with thermal radiation, viscous dissipation and induced magnetic field on peristaltic flow of Williamson nanofluid with a channel that is asymmetric has not been carried out so far.

This paper describes the fabrication of integral screen printed platinum resistance elements. A detailed description is given of the techniques of element manufacture and performance. The paper is finally illustrated by an example of sensor integration into a temperature critical subsystem. This example serves to demonstrate the potential manufacturing economies achieved by this approach.