Search results

To study the effect of inhibition of new bipyrazole derivatives on the corrosion of steel in HCl media at various temperatures.

In this study, novel corrosion inhibitors, namely bipyrazoles were synthesised and tested as corrosion inhibitors for steel in 1 M HCl. The degree of corrosion was measured using various techniques including weight loss measurements, potentiodynamic polarisation, linear polarisation resistance (Rp) and impedance spectroscopy (EIS).

It was found that 1,5,5′‐trimethyl‐1H,2′H‐3,3′‐bipyrazole (P₁) gave the best inhibition effect. The inhibition efficiency increased with the concentration of P₁ to attain 79 per cent at 10⁻³ M. Good agreement between the various methods explored was observed. Polarisation measurements also showed that P₁ acted essentially as a cathodic inhibitor. The cathodic curves indicated that the reduction of proton at the steel surface was an activating mechanism. P₁ adsorbed on the steel surface according to Frumkin adsorption model.

The synthesis route offers the possibility of other pyrazolic compounds to be tested in the future.

The inhibitory efficiency of P₁ increased with the increase of both the concentration and the temperature (in the 298‐353 K range). As such, P₁ can be used in chemical cleaning and pickling processes.

The originality of this work is the synthesis of new inhibitors based on pyrazolic organic compounds.

The purpose of this study is to investigate starch mucor (SM) in potassium iodide (KI) as corrosion inhibitor of aluminium in hydrochloric acid (HCl) medium.

The SM in KI was characterized by gravimetric, scanning electron microscopy, electrochemical impedance spectroscopy measurements, potentiodynamic polarization and gas chromatography-mass spectrometer techniques. The inhibition efficiency was optimized using response surface methodology.

The result revealed that the inhibitor inhibited corrosion at a low concentration with the rate of inhibition increasing as the concentration of the inhibitor increased. The inhibition efficiency increases as the temperature was increased with slight incorporation of the inhibitor (SM in KI). This indicates that the corrosion control is both inhibitor (SM in KI) and temperature dependent.

The research results can provide the basis for using SM in KI as corrosion inhibitor of aluminium in HCL medium. Mixed-type inhibitor nature of SM was proved by cathodic and anodic nature of the polarization curves.

The purpose of this paper is to investigate the adsorption and corrosion inhibition of two isomeric compounds (C4H5N3) as aminopyrazine (AP) and 2-amino-pyrimidine (2AP) on mild steel (MS) in 0.5 M HCl. The study was a trial to combine experimental and modelling studies and research effect of molecular geometry on inhibition effect of inhibitor molecules.

The thermodynamic, kinetic and quantum parameters were determined. The electrochemical impedance spectroscopy and anodic polarisation measurements were obtained. The scanning electron microscope was used for monitoring electrode surface. The highest occupied molecular orbital, energy of the lowest unoccupied molecular orbital, Mulliken and natural bonding orbital charges on the backbone atoms, absolute electronegativity, absolute hardness were calculated by density functional theory (DFT)/B3LYP/6-311G (++ d,p).

Results showed that AP and 2AP suppressed the corrosion rate of MS. The corrosion current values were 0.530, 0.050 and 0.016 mA cm-2 in HCl, AP and 2AP containing HCl solutions, respectively. It was illustrated with the blocked fraction of the MS surface by adsorption of inhibitors which obeyed the Langmuir isotherm. The inhibition efficiency follows the order: 2AP > AP which is in agreement with experimental and quantum results.

This paper provides lay a bridge on the molecular geometry and inhibition efficiency by electrochemical tests and modelling study. The inhibition effect of AP and 2AP has not been compared with each other, neither experimentally nor theoretically. This study put forward possible application of 2AP as corrosion inhibitor especially for closed-circuit systems.

The purpose of this paper is to minimize corrosion-related pollution in the environment. From the lemongrass extract (LGE), the authors selected one of the best green inhibitors.

The corrosion and inhibition of mild steel in traditional acidification solutions were estimated by electrochemical measurements. The corrosion appearance was observed with scanning electron microscopy, atomic force microscopy micrographs and attenuated total reflectance infrared spectroscopy spectrum. The correlation was formed between the gained inhibition efficiency (IE)% from electrochemical measurements and certain quantum chemical parameters.

The results displayed that the IE was up to 90% when the LGE concentration was 300 ppm. The results confirmed that the theoretical experiments are very similar to the experimental observations.

For the first time, LGE was used as a cheap and safe corrosion inhibitor for mild steel corrosion in the acidification process. The mechanism of mild steel corrosion and anti-corrosion in acid solution has been suggested.

The inhibition effect of Foeniculum vulgare seeds’ (FVS) extract on the corrosion of mild steel in acidic medium was studied using weight loss, electrochemical impedance spectroscopy and Tafel polarization, as well as the surface morphology of the mild steel.

Weight loss measurements, potentiodynamic tests, electrochemical impedance spectroscopy studies and gas chromatography/mass spectrometry and scanning electron microscopy analysis of FVS extract were performed.

FVS extract acts as a good inhibitor for the corrosion of mild steel in 1.0 M HCl. The inhibition efficiency increases with the increase in inhibitor concentration but decreases with the increase of temperature.

FVS extract was observed to play an important role in the corrosion inhibition of mild steel in acidic solution.

This paper is intended to be added to the family of green inhibitors which are highly efficient inhibitors and can be used in the area of corrosion prevention and control.

The purpose of this paper is to develop an eco-friendly corrosion inhibitor for mild steel in 1 M HCl.

A pharmaceutical drug acetyl G was investigated for its corrosion inhibition efficiency using weight loss method, potentiodynamic polarisation and electrochemical impedance spectroscopy.

The inhibition efficiency increased with increase in inhibitor concentration. Results from polarisation studies revealed mixed type of inhibition. Impedance studies, scanning electron microscopy and Fourier transform spectroscopy confirm the adsorption of inhibitor on the mild steel surface.

The drug acetyl G has sulphur and nitrogen atoms which effectively block the corrosion of mild steel and is non-toxic and has good inhibition efficiency.

This method provides an excellent, non-toxic and cost-effective material as a corrosion inhibitor for mild steel in acid medium.

Application of this drug as a corrosion inhibitor has not been reported yet in the literature. Replacing the organic inhibitors, this green inhibitor shows excellent inhibition efficiency. This is adsorbed excellently on the mild steel surface due to the presence of long chain and hetero atoms. Thus, the drug retards the corrosion reaction.

The purpose of this paper is to evaluate the effect of thiourea (TU) on corrosion resistance property for rolled and recrystallized E-34 microalloyed steels by using electrochemical polarization techniques.

To perceive the effect of TU on the corrosion inhibition efficiency, various concentrations of TU (from 1 × 10 − 4 to 1 × 10 − 2M) and different temperatures (20, 30 and 400°C) in 1N sulfuric acid are used.

It is found that TU has significant inhibition effect on corrosion process. Moreover, it reveals that both the inhibitor concentrations and temperatures have a strong influence on the corrosion prevention efficiency of inhibitor. Thermodynamics studies confirm that the inhibitor adsorption follows the Langmuir adsorption isotherm model.

To the best of the authors’ knowledge, it is the first work that has been disclosed the corrosion inhibitory effect of TU for recrystallized E-34 microalloyed steels in acidic media.

This paper aims to investigate the corrosion inhibition effects of indole-3-carbaldehyde and 2-methylindole on mild steel in 1 M HCl solution.

Indole-3-carbaldehyde and 2-methylindole as corrosion inhibitors of mild steel in 1 M HCl solution were investigated by polarisation and electrochemical impedance spectroscopy (EIS). Adsorption isotherm and mechanism were calculated. Quantum chemical calculations were used to find out a correlation between electronic structure of inhibitors and inhibition efficiency. Changes in the properties of metal surface in HCl solution in the presence of inhibitors were studied by contact angle measurements.

Polarisation results revealed inhibitors could reduce cathodic and anodic reactions rates on metal surface. EIS analysis showed that inhibition efficiency of indoles increases by increasing the inhibitors’ concentration; maximum inhibition efficiency was 95 and 94 per cent in solutions containing 1 mM indole-3-carbaldehyde and 2-methylindole, respectively. Inhibitors’ adsorptions on metal surface were confirmed by analysing the exposed metals’ surface through contact angles measurements. The adsorption of inhibitors was found to follow Langmuir isotherm. Quantum chemical calculations showed that a more positively charged benzene ring in the structure of two indole-based inhibitors would lead to higher adsorption to metal.

This research was carried out to understand the effects of two different functional groups (-C=O, -CH3) with different induction effects on the indole structure and on inhibition efficiency of corrosion inhibitors with the purpose of using these components in industrial application as acid wash solutions to etch and remove rusts from metal surfaces.

Electrochemical measurements were used to characterize the inhibiting effectiveness of Curcuma and saffron, considered as green inhibitors in a corrosive environment 3% NaCl on A106 Gr B carbon steel.

This study/paper aims to polarization and potentiodynamic impedance spectroscopy techniques were performed on A106 Gr B carbon steel in the 3% NaCl environment only and containing various concentrations of Curcuma and Saffron (0.005, 0.01, 0.02, 0.04, g/L) after 30 min of immersion; these measures were taken at a temperature of (298 ± 1)K. A voltlab PGZ 301 assembled by A 106 Gr B carbon steel working electrode, a platinum counter electrode (CE) and a saturated calomel electrode as the reference electrode were used in the experiment. In this research, potentiodynamic polarization and electrochemical impedance spectroscopy were used.

The inhibition efficiencies increased with increase in the concentrations of the inhibitor but decreased with rise in temperature. The obtained results show an optimal efficiency with 0.04 g/L which are ordered of 78 and 96 per cent successively for the two inhibitors. Curcuma and saffron acts as a mixed type inhibitor. Adsorption of the inhibitor molecules corresponds to Langmuir adsorption isotherm. Mechanism of inhibition was also investigated by calculating the thermodynamic and activation parameters like (ΔG), (E_a), (ΔH_a) and (ΔS_a). The inhibitor molecules followed physical adsorption on the surface of carbon steel.

The present trend in research on environmental friendly corrosion inhibitors is concentrating on products of natural origin due principally to non-toxicity and eco-friendliness. Among these natural products are curcuma and saffron.

The purpose of this paper is to reveal the effect of microstructure on the corrosion behavior of CoCrNi alloy in 3.5 Wt.% NaCl solution.

The as-cast CoCrNi alloy was prepared by arc melting, and the cold-rolled and annealed alloys were prepared by processing the as-cast alloy.

The experimental results showed that a protective passivation film was formed on the surfaces of these CoCrNi MEA, and the stability and compactness of alloys increased in the sequence of cold-rolled, as-cast and annealed CoCrNi alloys. The annealed CoCrNi alloys had the best pitting resistance.

This study proposes the effect of the microstructure of CoCrNi alloy on corrosion resistance.