Search results

Low-temperature plasma treatment, which offers an alternative to the existing treatment using chlorine, has been drawing worldwide attention as an eco-friendly technology for the anti-felting of wool. However, the reason why that plasma-treated wool does not shrink even after repeated aqueous laundry has still not been elucidated, though a number of related papers have been published. The aim of this study is to explore the reason by analyzing the surface of Ar-plasma treat wool using FT-IR and also XPS and by examining the changes of physicochemical properties of plasma-treated wool. It is suggested that intermediate cystine oxides(i.e., -S(O)-S- and -S(O)₂-S- groups generated on the wool fiber surface) have a strong affinity with water. Subsequently, cohesive force is exerted between fiber surfaces and this results in a decrease of the flexibility of the individual fiber in assembly. Therefore, any entanglements between fibers are suppressed, and the felting is controlled. This is an important anti-felting property plasma treatment provided. In addition, carboxyl and sulphonic acid groups produced on the fiber surface play some part in the felting behavior of wool probably due to an increase in the hydration of the fiber surface.

The surface properties of materials are often the important determinants of their usefulness, and many of the chemical treatments now in use are aimed at modifying these properties. The important properties of polymer materials such as adhesion, friction, wetting, penetrability and biological compatibility are strongly influenced by their surface characteristics. Low Temperature Plasma (LTP) is a technology which can produce not only interesting morphological modification on the surface of the polymers, but also can replace less environmental-friendly finishing processes. In this paper, four non-polymerizing plasma gases: oxygen, argon, tetrafluoromethane and 75%/25% nitrogen/hydrogen mixture were used to modify Nylon 6 filaments and fabrics. The results of SEM study reveals that interesting morphological changes on the surface of treated samples. Besides, with the appropriate LTP treatment, the fabric properties, such as the hydrophobicity of polyamides, surface luster, etc. can be greatly modified.

This study aims to enhance the dyeability of polyester fabrics with turmeric natural dyes through plasma and alkaline treatments. The aim is to achieve better color strength in dyed samples without significant changes in their other properties. This is done while the weight loss is kept in a range with no considerable effect on those properties.

The surface of a poly(ethylene terephthalate) fabric was modified using oxygen plasma at a low temperature. The alkaline hydrolysis of that polyester fabric was also done through treating it with an aqueous sodium hydroxide (NaOH) solution. The untreated and treated polyester fabrics were studied for the changes of their physical characteristics such as weight loss, wetting behavior, strength loss, bending length, flexural rigidity and K/S and wash fastness. The samples were treated with plasma and sodium hydroxide and dyed with a turmeric natural dye.

In comparison to the untreated sample, the plasma-treated, alkaline-treated and plasma treatment followed by alkaline hydrolysis polyester experienced 9.3%, 68.6% and 102.3% increase in its color depth as it was dyed with a turmeric natural dye, respectively. The plasma treatment was followed by alkaline hydrolysis. The improvement in the color depth could be attributed to the surface modification.

In this paper, investigations were conducted of the separate effects of plasma treatment and alkaline hydrolysis as well as their synergistic effect on the dyeing of the polyester fabric with a natural dye obtained from turmeric.

The purpose of this paper is to present the results of a study on friction characteristics of plasma, salt‐bath and gas nitrided layers produced in AISI 304 type austenitic and AISI 420 type martensitic stainless steels.

Plasma nitriding processes were carried out with DC‐pulsed plasma in 80% N₂+20% H₂ atmosphere at 450°C and 520°C for 8 h at a pressure of 2 mbar. Salt‐bath nitriding was performed in a cyanide‐cyanate salt‐bath at 570°C for 1.5 h. Gas nitriding was also conducted in NH₃ and CO₂ atmosphere at 570°C for 13 h. Characterization of all nitrided samples has been carried out by means of microstructure, microhardness, surface roughness measurement and friction coefficient. The morphologies of the worn surfaces of the nitrided samples were also observed using a scanning electron microscope. Friction characteristics of the nitrided samples have been investigated using a ball‐on‐disc friction and wear tester with a WC‐Co ball as the counterface under dry sliding conditions.

The plasma nitrided and salt‐bath nitrided layers on the 420 steel surfaces were much thicker than on the 304 steel surfaces. However, there was no obvious and homogeneous nitrided layer on the gas nitrided samples' surface. The plasma and salt‐bath nitriding techniques significantly increased the surface hardness of the 304 and 420 samples. The highest surface hardness of the 304 nitrided samples was obtained by the plasma nitrided technique at 520°C. On the other hand, the highest surface hardness of the 420 nitrided layers was observed in the 450°C plasma nitrided layer. Experimental friction test results showed that the salt‐bath and 450°C plasma nitrided layers were more effective in reducing the friction coefficient of the 304 and 420 stainless steels, respectively.

The relatively poor hardness and hence wear resistance of austenitic and martensitic stainless steels needs to be improved. Friction characteristic is a key property of performance for various applications of austenitic and martensitic stainless steels. This work has reported a comparison of friction characteristics of austenitic 304 and martensitic 420 stainless steels, modified using plasma, salt‐bath and gas nitriding processes. The paper is of significances for improving friction characteristics, indirectly wear performances, of austenitic and martensitic stainless steels.

This study aims to assess the performance of SAF 2205 duplex stainless steel against pure wear, tribo-corrosion, corrosion and the synergism between wear and corrosion. The effect of plasma nitriding conducted at low temperature (380°C) on SAF 2205 steel was analyzed.

Three systems were used for assessing the synergism between wear and corrosion: tribo-corrosion – wear tests conducted using the micro-scale abrasion test, performed under a slurry of alumina particles containing 3.5% NaCl; pure wear – tests conducted using the previous system but isolated in a glovebox with a 99% N2 atmosphere; and cyclic polarization under 3.5% NaCl solution. A hard nitrided layer of 3 µm thickness was characterized using X-ray diffraction, presenting expanded austenite.

The wear mode after micro-scale abrasion tests changed in the absence of an oxygen atmosphere. During pure wear, a mixed mode was identified (rolling + grooving), with the grooving mode more intense for the untreated steel. For tribo-corrosion tests, only rolling wear was identified. For all cases, the nitrided samples presented less wear. The corrosion results indicated a higher repassivation potential for the nitrided condition.

The synergism was more positive for the nitrided sample than for the untreated one, which can be considered for surface treatments of duplex stainless steels in practical applications.

A detailed description of wear mechanisms showed a significant change in the presence of oxygen atmosphere, a new approach for isolating pure wear.

The purpose of this paper is to design a low-cost stress bimorph RF-MEMS switch which is the desired transmission area application.

The bimorph structure of the low-temperature plasma-enhanced chemical vapor deposition (PECVD) of thermal oxide and gold are utilized to create the vibrating membrane. The effects of process conditions of low-temperature oxide deposited using the PECVD technique enable stress-free deposition of the key structural layer.

Scanning electron microscope images of the RF micro-switch confirms negligible stress in the released structure. The RF performances of this device exhibit isolation around 43 dB of up to 50 GHz in the OFF-state position and an insertion loss of less than 0.18 dB in the ON-state.

The finite element method results show good isolation of 43 dB and less insertion loss of 0.18 dB.

This paper aims to investigate the effects of a dielectric barrier discharge (DBD) plasma actuator (PA) qualitatively on aerodynamic characteristics of a 3 D-printed NACA 4412 airfoil model.

Airflow visualization study was performed at a Reynolds number of 35,000 in a small-scale open-loop wind tunnel. The effect of plasma actuation on flow separation was compared for the DBD PA with four different electrode configurations at 10°, 20° and 30° angles of attack.

Plasma activation may delay the onset of flow separation up to 6° and decreases the boundary layer thickness. The effects of plasma diminish as the angle of attack increases. Streamwise electrode configuration, in which electric wind is produced in a direction perpendicular to the freestream, is more effective in the reattachment of the airflow compared to the spanwise electrode configuration, in which the electric wind and the free stream are in the same direction.

The Reynolds number is much smaller than that in cruise aircraft conditions; however, the results are promising for low-velocity subsonic airflows such as improving control capabilities of unmanned aerial vehicles.

Superior efficacy of spanwise-generated electric wind over streamwise-generated one is demonstrated at a very low Reynolds number. The results in the plasma aerodynamics literature can be reproduced using ultra-low-cost off-the-shelf components. This is important because high voltage power amplifiers that are frequently encountered in the literature may be prohibitively expensive especially for resource-limited university aerodynamics laboratories.

The purpose of this paper is to generate nitrogen-containing groups in the cotton fabric surface via low-temperature nitrogen plasma as an eco-friendly physical/zero-effluent process. This was done for rendering cotton dye-able with Acid Blue 284, which in fact does not have any direct affinity to fix on it.

Dyeing characteristics of the samples such as color strength (K/S), fastness properties to light, rubbing and perspiration and durability, as well as tensile strength, elongation at break, whiteness, weight loss and wettability in addition to zeta potential of the dyed samples, were determined and compared with untreated fabric. Confirmation and characterization of the plasma-treated samples via chemical modifications and zeta potential was also studied using Fourier transform infrared spectroscopy (FTIR) and Malvern Zetasizer instrumental analysis.

The obtained results of the plasma-treated fabric reflect the following findings: FTIR results indicate the formation of nitrogen-containing groups on cotton fabrics; notable enhancement in the fabric wettability, zeta potential to more positive values and improvement in the dyeability and overall fastness properties of treated cotton fabrics in comparison with untreated fabric; the tensile strength, elongation at break, whiteness and weight % of the plasma treated fabrics are lower than that untreated one; and the durability of the plasma treated fabric decreased with increasing the number of washing cycles.

The novelty addressed here is rendering cotton fabrics dye-able with acid dye via the creation of new cationic nitrogen-containing groups on their surface via nitrogen plasma treatment as an eco-friendly and efficient tool with a physical/zero-effluent process.

The purpose of this paper is to: investigate coating of polylactic acid by TiO₂ using low-temperature plasma technique, which is a clean and environmentally benign process; study the characteristics of the obtained samples; and survey the antibacterial effect of nano-TiO₂. This method, as an eco-friendly technology used on the biodegradable polymer, would be benefited by industries which want to set feet on the greener path and reduce the social costs resulting from the harmful effects of pollutants.

TiO₂ was coated on a textile by DC magnetron sputtering. In this study titanium as a pure Ti anode is coated on the sample surface in the plasma reactor by entering argon gas (Ar). Then titanium oxide appears through entering oxygen (O₂) into the reactor.

Scanning electron microscopy analysis is applied to show the morphology of the coated surface. The quantitative value of TiO₂ was evaluated as weight percentage using X-ray fluorescence (XRF) and washing stability of the samples is measured using the XRF machine. The highest degree of antibacterial effects and washing stability are all observed in 10 min.

In this process, contrary to common methods, pure Ti is used for coating. Finishing of textiles via this method has been useful to be used as disposable hospital clothing due to its biodegradable and antibacterial properties. So it will be helpful in reducing negative environmental impacts.

This paper aims to propose a simple, eco-friendly method for obtaining colloidal solutions of silver nanoparticles (Ag NPs) by using of contact non-equilibrium low-temperature plasma in presents polysorbate-80 and to assess their antibacterial activity in composite materials (beads) for water treatment process.

Silver nanoparticles were prepared in aqueous AgNO3 solution by using of contact non-equilibrium low-temperature plasma in the present of nonionic surfactant polysorbate-80 (Tween 80) as capping agent. Ultraviolet–visible (UV) spectroscopy, X-ray diffraction and zeta potential analysis were used to study the formation and properties of silver nanoparticles.

The formation of silver colloidal solutions in the presence of capping agent under plasma discharge is characterized by the presence of peak λmax = 380 – 402 nm in the spectra. The addition of sodium alginate into the reaction mixture allows synthesizing stable colloidal silver solutions. The average size of formed silver particles is up to 50 nm. Ag NPs exhibited an excellent bactericidal activity against both gram-positive and gram- negative bacteria. Composite beads prepared using nonionic surfactant were found to be effective in disinfecting the Staphylococcus aureus to different extents.

Further studies are necessary for confirmation of the practical application, especially of the toxicity of Ag NPs, as well as the sorption properties of the alginate beads with Ag NPs.

The method provides a simple and practical solution to improving the synthesis of colloidal solutions of Ag NPs for water treatment process.

Contact nonequilibrium low-temperature plasma can be used as an effective technique for synthesis of nanomaterials.