Search results

The purpose of this paper is to mount Gurney flaps at the trailing edges of the canards and investigate their influence on aerodynamic characteristics of a simplified canard-configuration aircraft model.

A force measurement experiment was conducted in a low-speed wind tunnel. Hence, the height and shape effects of the Gurney flaps on the canards were investigated.

Gurney flaps can increase the lift and pitching-up moment for the aircraft model tested, thereby increasing the lift when trimming the aircraft. The dominant parameter to influence aerodynamic characteristics is the height of Gurney flaps. When the flap heights are the same, the aerodynamic efficiency of the triangular Gurney flaps is higher than that of the rectangular ones. Moreover, the canard deflection efficiency will be reduced with Gurney flaps equipped, but the total aerodynamic increment is considerable.

This paper helps to solve the key technical problem of increasing take-off and landing lift coefficients, thus improving the aerodynamic performance of the canard-configuration aircraft.

This paper recommends to adopt triangular Gurney flaps with the height of 3 per cent chord length of the canard root (c) for engineering application.

Aerodynamics drives the aircraft performance and, thus, influences fuel consumption and environmental compatibility. Further, optimization of aerodynamic shapes is an ongoing design activity in industrial offices; this will lead to incremental improvements. More significant step changes in performance are not expected from pure passive shape design. However, active flow control is a key technology, which has the potential to realize a drastic step change in performance. Flow control targets two major goals: low speed performance enhancements mainly for start and landing phase via control of separation and drag reduction at high speed conditions via skin friction and shock wave control.

This paper highlights flow control concepts and Airbus involvements for both items. To mature flow control systematically, local applications of separation control technology are of major importance for Airbus. In parallel, but at lower maturity level, investigations are ongoing to reduce the turbulent skin friction at cruise. A popular concept to delay separation at low speed conditions is the implementation of jet actuation control systems flush mounted to the wall of aerodynamic components.

In 2006, DLR (in collaboration with universities Berlin, Braunschweig and industrial partner Airbus) started to study active flow control for separation delay towards application. Based on basic proof of concepts (achieved in national projects), further flow control hardware developments and wind tunnel and lab testing took place in European funded projects.

Significant lift enhancements were realized via flow control applied to the wing leading edge and the flap.

This paper aims to correlate the flexible multibody analysis for the performance, blade airloads, rotor pitch control angles, and blade structural loads of a full-scale utility helicopter rotor in low-speed forward flight with wind tunnel test and flight test data.

A nonlinear flexible multibody dynamics analysis code, DYMORE, is used to analyze the performance and aeromechanics of a utility helicopter rotor in low-speed forward flight. The main rotor system is modeled using various multibody elements such as rigid bodies, nonlinear elastic beams, mechanical joints, and elastic springs/dampers. The freewake model is used to capture rotor wakes more elaborately in low-speed forward flight.

Fair to good correlations of rotor performance such as figure of merit in hover, rotor power, propulsive force, and lift in low-speed forward flight are achieved with sweeps of the thrust, rotor shaft tilting angle, and advance ratio, against wind tunnel test data. The blade section normal forces from the mid-span to outboard are fairly or well correlated with flight test data, but the normal force at the inboard blade station is under-predicted. The trimmed pitch control angles are reasonably predicted; however, the lateral cyclic pitch control angle is moderately under-predicted. The flap bending moments are compared fairly with measurements; however, the oscillations of the lead-lag bending and torsion moments are not captured well.

Reasonable predictions of the performance and aeromechanics of the rotor in low-speed forward flight will allow the flexible multibody dynamics to be used for the rotorcraft comprehensive analysis, in place of expensive flight and wind tunnel tests of the rotor.

Up to now, the stand-alone flexible multibody dynamics without the aid of external aerodynamic analysis has not been widely used for the analyses of rotor performance and aeromechanics in low-speed forward flight. However, the present flexible multibody dynamics analysis directly integrated with the freewake model gives fair to good correlation of the rotor performance and aeromechanics predictions in low-speed forward flight.

The purpose of this paper is to describe the research performed on flexible-wing micro air vehicle (MAV). Typical attributes associated with the aerodynamics of MAVs are low Reynolds number, low altitude flying environments and low aspect ratio platforms. These attributes give birth to several challenges such as poor aerodynamic performance, nonlinear lift patterns and reduced gust tolerance. Flexible-wing MAV is renowned for improved aerodynamic characteristics such as smooth flight in gusty conditions than its rigid-wing counterpart.

The wind-tunnel experiments are carried out for various configurations to determine the ways of further enhancing lift. The baseline geometric description for all MAVs includes 15-cm box dimension and an aspect ratio of 1. The experimental results of the baseline configuration are compared with other experimental results available in literature. After due validation, the effects of following parameters are quantized and compared with the rigid-wing counterpart: underlying skeleton; wing membrane extension; wing membrane relaxation; and wing membrane material (latex, silk, poly-vinyl chloride plastic sheet and nylon).

It is found that the skeleton layout significantly governs the lift characteristics. The effect of membrane extension and relaxation proved to be of little advantage. Latex sheets are found to be the best choice for membrane material. The aerodynamic assessment at low Reynolds number has demonstrated significant improvement of lift characteristics for flexible wings over rigid-wing counterparts.

The results presented in this paper are based on wind-tunnel experimentation. Further experimentation through flight test may be needed to reveal the true aerodynamic performance under unsteady maneuvers.

The material properties vary significantly during fabrication. A technique to standardize the properties of flexible membranes is a missing link in literature and warrants further investigation.

This concept of flexible wing has shown high potential. The primary objective of this paper is to experimentally investigate ways of further enhancing the lift of flexible-wing MAVs by controlling flexibility passively. While various researchers have spent many years on developing the optimum wing frame for the flexible wing, research on different wing materials has been limited. This is the first paper of its kind covering all aspects of wing-frame design, material, effects of extension and relaxation on wing membrane.

This paper aims to achieve an optimum flow separation control over the airfoil using a passive flow control method by introducing a bio-inspired nose near the leading edge of the National Advisory Committee for Aeronautics (NACA) 4 and 6 series airfoil. In addition, to find the optimised leading edge nose design for NACA 4 and 6 series airfoils for flow separation control.

Different bio-inspired noses that are inspired by the cetacean species have been analysed for different NACA 4 and 6 series airfoils. Bio-inspired nose with different nose length, nose depth and nose circle diameter have been analysed on airfoils with different thicknesses, camber and camber locations to understand the aerodynamic flow properties such as vortex formation, flow separation, aerodynamic efficiency and moment.

The porpoise nose design that has a leading edge with depth = 2.25% of chord, length = 0.75% of chord and nose diameter = 2% of chord, delays the flow separation and improves the aerodynamic efficiency. Average increments of 5.5% to 6° in the lift values and decrements in parasitic drag (without affecting the pitching moment) for all the NACA 4 and 6 series airfoils were observed irrespective of airfoil geometry such as different thicknesses, camber and camber location.

The two-dimensional computational analysis is done for different NACA 4 and 6 series airfoils at low subsonic speed.

This design improves aerodynamic performance and increases the structural strength of the aircraft wing compared to other conventional high lift devices and flow control devices. This universal leading edge flow control device can be adapted to aircraft wings incorporated with any NACA 4 and 6 series airfoil.

The results would be of significant interest in the fields of aircraft design and wind turbine design, lowering the cost of energy and air travel for social benefits.

Different bio-inspired nose designs that are inspired by the cetacean species have been analysed for NACA 4 and 6 series airfoils and universal optimum nose design (porpoise airfoil) is found for NACA 4 and 6 series airfoils.

Ground effect is one of the important factors in the enhancement of wing aerodynamic performance. This study aims to investigate the aerodynamic forces and performance of a flapping wing with the bending deflection angel under the ground effect.

In this study, the wing and flapping mechanism were designed and manufactured based on the seagull flight and then assembled. It is worth noting that this mechanism is capable of wing bending in the upstroke flight as big birds. Finally, the model was examined at bending deflection angles of 0° and 107° and different distances from the surface, flapping frequencies and velocities in forward flight in a wind tunnel.

The results revealed that the aerodynamic performance of flapping wings in forward flight improved due to the ground effect. The effect of the bending deflection mechanism on lift generation was escalated when the flapping wing was close to the surface, where the maximum power loading occurred.

Flapping wings have many different applications, such as maintenance, traffic control, pollution monitoring, meteorology and high-risk operations. Unlike fixed-wing micro aerial vehicles, flapping wings are capable of operating in very-low Reynolds-number flow regimes. On the other hand, ground effect poses positive impacts on the provision of aerodynamic forces in the take-off process.

Bending deflection in the flapping motion and ground effect are two influential factors in the enhancement of the aerodynamic performance of flapping wings. The combined effects of these two factors have not been studied yet, which is addressed in this study.

The paper aims to assess the potential of aircraft operation from city centres to achieve shortened travel times and the involved aircraft design process.

The paper describes the methodical approach and iterative procedure of the design process. An assessment of potential technologies is conducted to provide the required enhancements to fulfil the constraints following an inner-city operation. Operational procedures were analysed to reduce the noise propagation through flight path optimization. Furthermore, a ground-based assisted take-off system was conceived to lower required take-off field length and to prevent engine sizing just for the take-off case. Cabin design optimization for a fast turnaround has been conducted to ensure a wide utilization spectrum. The results prove the feasibility of an aircraft developed for inner city operation.

A detailed concept for a 60-passenger single aisle aircraft is proposed for an Entry-Into-Service year 2040 with a design range of 1,500 nautical miles for a load factor of 90 per cent. Although the design for Short Take-off and Landing and low noise operation had to be traded partly with cruise efficiency, a noteworthy reduction in fuel burn per passenger and nautical mile could be achieved against current aircraft.

The findings will contribute to the evaluation of the feasibility and impact of the Flightpath 2050 goal of a 4-h door-to-door by providing a feasible but ambitious example. Furthermore, it highlights possible bottlenecks and problems faced when realizing this goal.

The paper draws its value from the consideration of the overall sizing effects at aircraft level and from a holistic view on an inner-city airport/aircraft concept design for a 4-h door-to-door goal.

The high lift devices are effective at high angle of attack to increase the coefficient of lift by increasing the camber. But it affects the low angle of attack aerodynamic performance by increasing the drag. Hence, they have made as a movable device to deploy only at high angles of attack, which increases the design and installation complexities. This study aims to focus on the comparison of aerodynamic efficiency of different conventional leading edge (LE) slat configurations with simple fixed bioinspired slat design.

This research analyzes the effect of LE slat on aerodynamic performance of CLARK Y airfoil at low and high angles of attack. Different geometrical parameters such as slat chord, cutoff, gap, width and depth of LE slat have been considered for the analysis.

It has been found that the LE slat configuration with slat chord 30% of airfoil chord, forward extension 8% of chord, dip 3% of chord and gap 0.75% of chord gives higher aerodynamic efficiency (C_l/Cd) than other LE slat configurations, but it affects the low angles of attack aerodynamic performance with the deployed condition. Hence, this optimum slat configuration is further modified by closing the gap between LE slat and the main airfoil, which is inspired by the marine mammal’s nose. Thus increases the coefficient of lift at high angles of attack due to better acceleration over the airfoil nose and as well enhances the aerodynamic efficiency at low angles of attack.

The two-dimensional computational analysis has been done for different LE slat’s geometrical parameters at low subsonic speed.

This bio-inspired nose design improves aerodynamic performance and increases the structural strength of aircraft wing compared to the conventional LE slat. This fixed design avoids the complex design and installation difficulties of conventional movable slats.

The findings will have significant impact on the fields of aircraft wing and wind turbine designs, which reduces the design and manufacturing complexities.

Different conventional slat configurations have been analyzed and compared with a simple fixed bioinspired slat nose design at low subsonic speed.

The purpose of this paper is to achieve an optimum flow separation control over the airfoil using passive flow control method by introducing bio-inspired nose near the leading edge of the NACA 2412 airfoil.

Two distinguished methods have been implemented on the leading edge of the airfoil: forward facing step, which induces multiple accelerations at low angle of attack, and cavity/backward facing step, which creates recirculating region (axial vortices) at high angle of attack.

The porpoise airfoil (optimum bio-inspired nose airfoil) delays the flow separation and improves the aerodynamic efficiency by increasing the lift and decreasing the parasitic drag. The maximum increase in aerodynamic efficiency is 22.4 per cent, with an average increase of 8.6 per cent at all angles of attack.

The computational analysis has been done for NACA 2412 airfoil at low subsonic speed.

This design improves the aerodynamic performance and increases structural strength of the aircraft wing compared to other conventional high-lift devices and flow-control devices.

Different bio-inspired nose designs which are inspired by the cetacean species have been analysed for NACA 2412 airfoil, and optimum nose design (porpoise airfoil) has been found.

With aims to increase the aerodynamic efficiency of aerodynamic surfaces, study on flow control over these surfaces has gained importance. With the addition of flow control devices such as synthetic jets and vortex generators, the flow characteristics can be modified over the surface and, at the same time, enhance the performance of the body. One such flow control device is the tubercle. Inspired by the humpback whale’s flippers, these leading-edge serrations have improved the aerodynamic efficiency and the lift characteristics of airfoils and wings. This paper aims to discusses in detail the flow physics associated with tubercles and their effect on swept wings.

This study involves a series of experimental and numerical analyses that have been performed on four different wing configurations, with four different sweep angles corresponding to 0°, 10°, 20° and 30° at a low Reynolds number corresponding to Re_c=100,000.

Results indicate that the effect of tubercles diminishes with an increase in wing sweep. A significant performance enhancement was observed in the stall and post-stall regions. The addition of tubercles led to a smooth post-stall lift characteristic compared to the sudden loss in the lift with regular wings. Among the four different wings under observation, it was found that tubercles were most effective on the 0° configuration (no sweep), showing a 10.8% increment in maximum lift and a 38.5% increase in the average lift generated in the post-stall region. Tubercles were least effective on 30° configuration. Furthermore, with an increase in wing sweep, co-rotating vortices were distinctly observed rather than counter-rotating vortices.

While extensive numerical and experimental studies have been performed on straight wings with tubercles, studies on the tubercle effect on swept wings at low Reynolds number are minimal and mainly experimental in nature. This study uses numerical methods to explore the complex flow physics associated with tubercles and their implementation on swept wings. This study can be used as an introductory study to implement passive flow control devices in the low Reynolds number regime.