Search results

1 – 10 of 10
Article
Publication date: 15 December 2023

Stanimir Čekerinac, Ana Starčević, Miloš Basailović, Dušan Sekulić and Nevena Divac

Prison settings have limited resources, and it is of particular interest to analyze which antipsychotics are commonly prescribed in these conditions and to determine the…

Abstract

Purpose

Prison settings have limited resources, and it is of particular interest to analyze which antipsychotics are commonly prescribed in these conditions and to determine the prevalence of the adverse effects.

Design/methodology/approach

A cross-sectional, epidemiological survey was used to measure the prevalence of antipsychotic prescribing among adult prisoners in Sremska Mitrovica Prison in 2020.

Findings

The prevalence of antipsychotic use was 7.58%. The most commonly prescribed antipsychotic was clozapine (45.36%), but also olanzapine, haloperidol and risperidone were prescribed. The incidence of extrapyramidal adverse effects was nonexistent and the metabolic parameters did not differ between participants using metabolic syndrome–inducing antipsychotics and those who were prescribed metabolically inert medications. The prescribed doses were lower compared with the recommended.

Research limitations/implications

This research includes certain points that should be cautiously considered. First, the data were cross-sectional and the findings did not provide causal interpretations. Second, the data are from a single penitentiary institution, albeit the largest in the country; however, that may affect the generalizability of the findings. Third, because the included subjects were not hospitalized, some laboratory analyses were not available, according to the local regulations, and thus the prevalence of metabolic syndrome could not be precisely determined.

Practical implications

The prevalence of the antipsychotic use in prison environment is significantly higher than in general population. The most frequently prescribed antipsychotics are clozapine and olanzapine. The prevalence of adverse effects is rare, however, that is possibly due to low doses of the prescribed antipsychotics. The list of therapeutic options available to the incarcerated persons in this facility is also limited. The list of available antipsychotics does not include some atypical antipsychotics with more favorable safety and tolerability profile, such as aripiprazole or cariprazine. Long-acting antipsychotic injectables were also not available to these patients. Laboratory analyses are not regularly conducted and do not include some essential parameters such as lipid status or differential blood count. Low-dose antipsychotics for behavioral symptoms appears to be well tolerated under prison conditions where adherence is assured. It is effective during the prison stay but long-term effects, especially after release from prison, had not been studied.

Social implications

This paper advocates for better quality of health care in this correctional facility: more therapeutic options and better laboratory monitoring. The authors justify the use of clozapine in this settings due its benefits in reducing violence and aggression; however, further research would be necessary to clarify does the use of clozapine in incarcerated persons cause behavioral improvements that could result in shorter incarcerations, less recidivism and better quality of life.

Originality/value

To the best of the authors’ knowledge, this is the first insight of the antipsychotic prescribing practice in Serbia. There is very limited data on prisoners’ health care, especially mental health care, in Balkan countries. The antipsychotic prescribing pattern in this sample is characterized with higher than expected clozapine use, but without expected adverse effects.

Details

International Journal of Prison Health, vol. 20 no. 1
Type: Research Article
ISSN: 2977-0254

Keywords

Abstract

Details

Children and the Climate Migration Crisis: A Casebook for Global Climate Action in Practice and Policy
Type: Book
ISBN: 978-1-80455-910-9

Article
Publication date: 12 February 2024

Mohammad Zamani, Zahra Sohrabi, Ladan Aghakhani, Kimia Leilami, Saeed Nosratabadi, Zahra Namkhah, Cain Clark, Neda Haghighat, Omid Asbaghi and Fatemeh Fathi

Previous research indicates that vitamin D and omega-3 co-supplementation may benefit overall health, but current evidence regarding its effects on lipid profile remains unclear…

Abstract

Purpose

Previous research indicates that vitamin D and omega-3 co-supplementation may benefit overall health, but current evidence regarding its effects on lipid profile remains unclear. The present systematic review and meta-analysis aimed to examine the effects of vitamin D and omega-3 co-supplementation on lipid profile (total cholesterol [TC], low-density lipoprotein [LDL], triglyceride [TG] and high-density lipoprotein [HDL]) in adults.

Design/methodology/approach

In this systematic review and meta-analysis, relevant studies were obtained by searching the PubMed, Scopus and Web of Science databases (from inception to January 2022). Weighted mean differences and 95% confidence intervals were estimated via a random-effects model. Heterogeneity, sensitivity analysis and publication bias were reported using standard methods.

Findings

Pooled analysis of six randomized controlled trials (RCTs) revealed that vitamin D and omega-3 co-supplementation yielded significant reductions in TG (p = 0.631). A pooled analysis of five trials indicated a significant association between omega-3 and vitamin D treatment and reductions in TC (p = 0.001) and LDL (p = 0.001). Although, pooled analyses of omega-3 and vitamin D did not significantly affect HDL.

Originality/value

The findings suggest that vitamin D and omega-3 co-supplementation lowers TG, TC and LDL in adults. Future, large-scale, RCTs on various populations are needed to elucidate further beneficial effects of vitamin D and omega-3 co-supplementation on lipid profile and establish guidelines for clinical practice.

Details

Nutrition & Food Science , vol. 54 no. 2
Type: Research Article
ISSN: 0034-6659

Keywords

Article
Publication date: 7 February 2024

Chinkle Kaur and Jasleen Kaur

Millets are ancient grains, following wheat, that have been a fundamental source of human sustenance. These are nutrient-rich small-seeded grains that have gained prominence and…

Abstract

Purpose

Millets are ancient grains, following wheat, that have been a fundamental source of human sustenance. These are nutrient-rich small-seeded grains that have gained prominence and admiration globally due to their super resilience in diverse climates and significant nutritional benefits. As millets are renowned for their nutritional richness, the demand for millet-based products increases. Hence, this paper aims in identifying the growing need for innovative processing techniques that not only preserve their nutritional content but also extend their shelf life.

Design/methodology/approach

In traditional times, heat was the only means of cooking and processing of the foods, but the amount of damage they used to cause to the sensorial and nutritional properties was huge. Millets’ sensitivity toward heat poses a challenge, as their composition is susceptible to disruption during various heat treatments and manufacturing processes. To cater to this drawback while ensuring the prolonged shelf life and nutrient preservation, various innovative approaches such as cold plasma, infrared technology and high hydrostatic pressure (HPP) processing are being widely used. These new methodologies aim on inactivating the microorganisms that have been developed within the food, providing the unprocessed, raw and natural form of nutrients in food products.

Findings

Among these approaches, nonthermal technology has emerged as a key player that prioritizes brief treatment periods and avoids the use of high temperatures. Nonthermal techniques (cold plasma, infrared radiation, HPP processing, ultra-sonication and pulsed electric field) facilitate the conservation of millet’s nutritional integrity by minimizing the degradation of heat-sensitive nutrients like vitamins and antioxidants. Acknowledging the potential applications and processing efficiency of nonthermal techniques, the food industry has embarked on substantial investments in this technology. The present study provides an in-depth exploration of the array of nonthermal technologies used in the food industry and their effects on the physical and chemical composition of diverse millet varieties.

Originality/value

Nonthermal techniques, compared to conventional thermal methods, are environmentally sound processes that contribute to energy conservation. However, these conveniences are accompanied by challenges, and this review not only elucidates these challenges but also focuses on the future implications of nonthermal techniques.

Article
Publication date: 19 January 2024

Natthawut Daoset, Samroeng Inglam, Sujin Wanchat and Nattapon Chantarapanich

This paper aims to investigate the influence of post-curing temperature, post-curing time and gamma ray irradiation dose upon the tensile and compressive mechanical properties of…

Abstract

Purpose

This paper aims to investigate the influence of post-curing temperature, post-curing time and gamma ray irradiation dose upon the tensile and compressive mechanical properties of the medical graded vat photopolymerization parts.

Design/methodology/approach

Medical graded vat photopolymerization specimens, made from photopolymer resin, were fabricated using bottom-up vat photopolymerization machine. Tensile and compressive tests were conducted to assess the mechanical properties. The specimens were categorized into uncured and post-curing groups. Temperature post-processing and/or gamma irradiation exposure were for post-curing specimens. The post-curing parameters considered included temperature levels of 50°C, 60°C and 70°C, with 1, 2, 3 and 4 h periods. For the gamma irradiation, the exposure doses were 25, 50, 75 and 100 kGy.

Findings

Post-curing improved the mechanical properties of medical graded vat photopolymerization parts for both tensile and compressive specimens. Post-curing temperature greater than 50°C or a prolonged post-curing period of more than 1 h made insignificant changes or deterioration in mechanical properties. The optimal post-curing condition was therefore a 50°C post-curing temperature with 1 h post-curing time. Exposure to gamma ray improved the compressive mechanical properties, but deteriorated tensile mechanical properties. Higher gamma irradiation doses could decrease the mechanical properties and also make the part more brittle, especially for doses more than 25 kGy.

Originality/value

The obtained results would be beneficial to the medical device manufacturer who fabricated the invasive temporary contact personalized surgical instruments by vat photopolymerization technique. In addition, it also raised awareness in excessive gamma sterilization in the medical graded vat photopolymerization parts.

Details

Rapid Prototyping Journal, vol. 30 no. 3
Type: Research Article
ISSN: 1355-2546

Keywords

Article
Publication date: 7 December 2023

Sabrina Hegner, Janina Magdalena Schaumann, Barbara Francioni and Ilaria Curina

The aim of this paper is to respond to the call for exploring and empirically testing both antecedents and outcomes of brand addiction and compulsive buying behaviour. The focus…

Abstract

Purpose

The aim of this paper is to respond to the call for exploring and empirically testing both antecedents and outcomes of brand addiction and compulsive buying behaviour. The focus of the study is on the food habits of young female consumers.

Design/methodology/approach

To test the hypotheses, a survey design gathering cross-sectional primary data from 325 female Italian consumers and a structural equation modelling have been adopted.

Findings

Findings show that brand addiction is positively influenced by consumer resilience, leading to increased life happiness and self-esteem, while compulsive buying behaviour is negatively influenced by consumer resilience and positively influenced by impulsivity. Compulsive buying is also associated with brand addiction and emotional overeating. Emotional overeating is additionally influenced by impulsivity and the control variables of enjoyment of food and loneliness. Moreover, loneliness has a negative impact on life happiness and self-esteem.

Originality/value

The study applies the proposed theory by Mrad and Cui (2020) on the relationship between brand addiction and compulsive buying to food consumption. Furthermore, it expands on this research by investigating consumer characteristics as determinants and behavioural outcomes.

Details

British Food Journal, vol. 126 no. 3
Type: Research Article
ISSN: 0007-070X

Keywords

Book part
Publication date: 5 April 2024

Kajal Lahiri and Paul Noroski

The authors examine whether or not applicants and recipients of federal disability insurance (DI) inflate their self-assessed health (SAH) problems relative to others. To do this…

Abstract

The authors examine whether or not applicants and recipients of federal disability insurance (DI) inflate their self-assessed health (SAH) problems relative to others. To do this, the authors employ a technique which uses anchoring vignettes. This approach allows them to examine how various cohorts of the population interpret survey questions associated with subjective self-assessments of health. The results of the analysis suggest that DI participants do inflate the severity of a given health problem, but by a small but significant degree. This tendency to exaggerate the severity of disability problems is much more apparent among those with more education (especially those with a college degree). In contrast, racial minorities tend to underestimate severity ratings for a given disability vignette when compared to their white peers.

Open Access
Article
Publication date: 21 April 2023

Rana I. Mahmood, Harraa S. Mohammed-Salih, Ata’a Ghazi, Hikmat J. Abdulbaqi and Jameel R. Al-Obaidi

In the developing field of nano-materials synthesis, copper oxide nanoparticles (NPs) are deemed to be one of the most significant transition metal oxides because of their…

Abstract

Purpose

In the developing field of nano-materials synthesis, copper oxide nanoparticles (NPs) are deemed to be one of the most significant transition metal oxides because of their intriguing characteristics. Its synthesis employing green chemistry principles has become a key source for next-generation antibiotics attributed to its features such as environmental friendliness, ease of use and affordability. Because they are more environmentally benign, plants have been employed to create metallic NPs. These plant extracts serve as capping, stabilising or hydrolytic agents and enable a regulated synthesis as well.

Design/methodology/approach

Organic chemical solvents are harmful and entail intense conditions during nanoparticle synthesis. The copper oxide NPs (CuO-NPs) synthesised by employing the green chemistry principle showed potential antitumor properties. Green synthesised CuO-NPs are regarded to be a strong contender for applications in the pharmacological, biomedical and environmental fields.

Findings

The aim of this study is to evaluate the anticancer potential of CuO-NPs plant extracts to isolate and characterise the active anticancer principles as well as to yield more effective, affordable, and safer cancer therapies.

Originality/value

This review article highlights the copper oxide nanoparticle's biomedical applications such as anticancer, antimicrobial, dental and drug delivery properties, future research perspectives and direction are also discussed.

Details

Arab Gulf Journal of Scientific Research, vol. 42 no. 2
Type: Research Article
ISSN: 1985-9899

Keywords

Article
Publication date: 14 March 2024

Qiang Wen, Lele Chen, Jingwen Jin, Jianhao Huang and HeLin Wan

Fixed mode noise and random mode noise always exist in the image sensor, which affects the imaging quality of the image sensor. The charge diffusion and color mixing between…

Abstract

Purpose

Fixed mode noise and random mode noise always exist in the image sensor, which affects the imaging quality of the image sensor. The charge diffusion and color mixing between pixels in the photoelectric conversion process belong to fixed mode noise. This study aims to improve the image sensor imaging quality by processing the fixed mode noise.

Design/methodology/approach

Through an iterative training of an ergoable long- and short-term memory recurrent neural network model, the authors obtain a neural network model able to compensate for image noise crosstalk. To overcome the lack of differences in the same color pixels on each template of the image sensor under flat-field light, the data before and after compensation were used as a new data set to further train the neural network iteratively.

Findings

The comparison of the images compensated by the two sets of neural network models shows that the gray value distribution is more concentrated and uniform. The middle and high frequency components in the spatial spectrum are all increased, indicating that the compensated image edges change faster and are more detailed (Hinton and Salakhutdinov, 2006; LeCun et al., 1998; Mohanty et al., 2016; Zang et al., 2023).

Originality/value

In this paper, the authors use the iterative learning color image pixel crosstalk compensation method to effectively alleviate the incomplete color mixing problem caused by the insufficient filter rate and the electric crosstalk problem caused by the lateral diffusion of the optical charge caused by the adjacent pixel potential trap.

Details

Sensor Review, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 0260-2288

Keywords

Article
Publication date: 20 March 2024

Lorna de Witt, Kathryn A. Pfaff, Roger Reka and Noeman Ahmad Mirza

Current and predicted continued dramatic increases in international migration and ethnocultural diversity of older adult cohorts pose challenges for health care services. Review…

Abstract

Purpose

Current and predicted continued dramatic increases in international migration and ethnocultural diversity of older adult cohorts pose challenges for health care services. Review studies on ethnoculturally diverse older adults and health care show a lack of focus on their service use experiences. This study aims to report a meta-ethnography that addresses this knowledge gap through answering the review question: How do ethnoculturally diverse older adults who are immigrants experience health careservices?

Design/methodology/approach

The authors applied a seven-phase method of meta-ethnography to guide the review. The authors conducted two literature searches (April 2018 and June 2020) in MEDLINE, CINAHL, Embase, Sociological Abstracts and Abstracts in Social Gerontology that yielded 17 papers eligible for review.

Findings

“There’s always something positive and something negative” is the overarching metaphor for answering the review question. Findings highlight positive and negative tensions within ethnoculturally diverse older adults’ health care use experiences of understanding and being understood, having trust in providers and the health care system, having needs, preferences and resources met and desire for self-care over dependency. The majority of experiences were negative. Tipping points towards negative experiences included language, fear, provider attitudes and behaviours, service flexibility, attitudes towards Western and traditional health care and having knowledge and resources.

Originality/value

The authors propose concrete actions to mitigate the tipping points. The authors discuss policy recommendations for health care system changes at the micro, meso and macro service levels to promote positive experiences and address mainstream service policy inequities.

Details

International Journal of Migration, Health and Social Care, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 1747-9894

Keywords

1 – 10 of 10