Search results

The purpose of this study aims to simulate the long-period fiber grating sensor pulse peak position against the transmission range. The long-period fiber grating sensor pulse peak position against the transmission range is simulated clearly where the pulse peak value at zero position is 0.972655 with the ripple factor of unity. It is demonstrated that the long-period fiber grating sensor bandwidth can be estimated to be 50 µm. Wavelength shift of the long-period grating sensor (LPGS) is reported against grating wavelength, applied temperatures and applied micro strain.

This work has reported the numerical simulation of LPGS transmission spectrum behavior characteristics under the strain and temperature effects by using OptiGrating simulation software. The sensor fabrication material is silica-doped germanium. The transmittivity/reflectivity and input spectrum pulse intensity of long-period Bragg sensor variations are simulated against the grating wavelength variations. Input/output pulse intensity of LPGS variations is simulated against the timespan variations with the Gaussian input pulse from 100 to 500 km link length.

Temperature variation and strain variation of the LPGS are outlined against both applied temperatures and micro-strain variations at the central grating wavelength of 1,550 nm.

It is demonstrated that the long period fiber grating sensor bandwidth can be estimated to be 50 µm. Wavelength shift of the long period grating sensor is reported against both grating wavelength, applied temperatures and applied micro strain. Temperature variation and strain variation of the long period grating sensor are outlined against both applied temperatures and micro strain variations at the central grating wavelength of 1550 nm.

The on‐line concentration and temperature measurement of solutions is of great interest as a means of quality production control in many industrial processes, such as in food service industry, pharmaceuticals industry, chemical industry and environmental engineering, especially for harmful solutions or solutions that cannot be reached by the operator. This paper seeks to address these issues.

A high resolution all‐fiber multi‐parameter sensor system has been studied theoretically and experimentally. The sensor system can be used for on‐line monitoring of concentration and temperature simultaneously and dynamically. A combined long period fiber grating (CLPG) is used as the sensor head based on its resonance wavelength shifts being almost linearly with concentration and temperature, and also based on that the two applied resonance peaks have different concentration‐wavelength coefficients and different temperature‐wavelength coefficients. Two wavelength‐matched fiber Bragg gratings (FBGs) are used to convert resonance peak wavelengths of the CLPG into corresponding intensities for interrogation.

When the concentration and the temperature all fluctuate dynamically during experiments, a concentration resolution of 0.03 g/L has been achieved in the range of 0∼200 g/L, and a temperature resolution of 0.02C has been realized in the range of −20∼60C.

On‐line monitoring of concentration and temperature for solutions is a means of quality production control in biological, chemical and other many industrial processes, such as in food service industry, pharmaceuticals industry, chemical industry, and also in environmental engineering, especially for harmful solutions or solutions that cannot be reached by the operator. Optical fiber sensors have numerous advantages over traditional sensors, such as immunity to electromagnetic interference, higher stability and sensitivity, more easiness of multiplex, being competent for application in harsh environments, “smart structures” and on‐site measurements. Long period optical fiber grating sensor is the most appropriate sensor for multi‐parameter monitoring in the fields mentioned above, which has all the advantages of optical fiber sensor. Besides, optical fiber grating sensors can be used for monitoring more accurately because its signal is coded by wavelength. The all‐fiber sensor system is suitable for remote monitoring of many solutions, such as the solutions of NaCl, glucose, alcohol, and hydrocarbon.

The purpose of this paper is to demonstrate a simple fiber sensor for simultaneous measurement of liquid refractive-index (RI) and temperature.

The sensor structure is formed by a long period fiber grating cascaded with a section of thin-core fiber. The long period fiber grating is fabricated on single mode fiber, followed by a section of 20-mm length thin-core fiber which is a modal interferometer.

Cladding mode interference between long period fiber grating and thin-core fiber modal interferometer is weak in the experimental investigation. Both of these two cladding mode type fiber devices are sensitive to surrounding RI and temperature. So the RI and temperature can be measured simultaneously by monitoring the spectral characteristics of the compound sensor. The sensitivity is calibrated and sensor matrix is provided in the experiment.

This proposed fiber sensor is simple, tough, cost-effective and suitable for discriminate the liquid RI and temperature with high sensitivity.

This study aims to analyze the transmission characteristics of a long-period grating (LPG) fabricated on plastic optical fibers (POFs) and its refractive index (RI) sensing.

The geometric optic method is used to analyze the factors affecting the transmission characteristics of an LPG on POFs. The RI sensing performances of unbent LPGs and U-bent LPGs fabricated on POFs with different diameters are evaluated experimentally.

This study shows that the transmission loss caused by LPG strongly depends on the structural parameters of LPG and the environmental RI. For the unbent LPG, the highest RI sensitivity of 1,015%/RI unit (RIU) was obtained in the RI range of 1.33–1.45. For the U-bent LPG without cladding, the highest RI sensitivities of 1,007 and 559%/RIU are obtained in the RI ranges of 1.33–1.40 and 1.40–1.45, respectively.

A geometric optic method is used to analyze the transmission characteristics for an LPG on POFs, and the RI sensing of the LPGs are studied experimentally. The results show the LPG has a good RI sensing performances and is with the features of low-cost, simple structure and easy fabrication.

The purpose of this paper is to provide a contemporary look at the current state‐of‐the‐art in wireless sensor networks (WSNs) for structure health monitoring (SHM) applications and discuss the still‐open research issues in this field and, hence, to make the decision‐making process more effective and direct.

This paper presents a comprehensive review of WSNs for SHM. It also introduces research challenges, opportunities, existing and potential applications. Network architecture and the state‐of‐the‐art wireless sensor communication technologies and standards are explained. Hardware and software of the existing systems are also clarified.

Existing applications and systems are presented along with their advantages and disadvantages. A comparison landscape and open research issues are also presented.

The paper presents a comprehensive and recent review of WSN systems for SHM applications along with open research issues.

This research paper adopts the fundamental tenets of advanced technologies in industry 4.0 to monitor the structural health of concrete beam members using cost-effective non-destructive technologies. In so doing, the work illustrates how a coalescence of low-cost digital technologies can seamlessly integrate to solve practical construction problems.

A mixed philosophies epistemological design is adopted to implement the empirical quantitative analysis of “real-time” data collected via sensor-based technologies streamed through a Raspberry Pi and uploaded onto a cloud-based system. Data was analysed using a hybrid approach that combined both vibration-characteristic-based method and linear variable differential transducers (LVDT).

The research utilises a novel digital research approach for accurately detecting and recording the localisation of structural cracks in concrete beams. This non-destructive low-cost approach was shown to perform with a high degree of accuracy and precision, as verified by the LVDT measurements. This research is testament to the fact that as technological advancements progress at an exponential rate, the cost of implementation continues to reduce to produce higher-accuracy “mass-market” solutions for industry practitioners.

Accurate structural health monitoring of concrete structures necessitates expensive equipment, complex signal processing and skilled operator. The concrete industry is in dire need of a simple but reliable technique that can reduce the testing time, cost and complexity of maintenance of structures. This was the first experiment of its kind that seeks to develop an unconventional approach to solve the maintenance problem associated with concrete structures. This study merges industry 4.0 digital technologies with a novel low-cost and automated hybrid analysis for real-time structural health monitoring of concrete beams by fusing several multidisciplinary approaches into one integral technological configuration.

Optical fibre multiplexed sensors are used to make measurements at multiple, discrete locations, usually by sending optical signals between each measurement location and a conveniently positioned optical interrogation instrument. It is rapidly becoming practical to construct multiplexed optical fibre sensor arrays based on in‐fibre Bragg gratings. A Bragg grating can be produced in an optical fibre by writing a periodic variation in the refractive index of the fibre’s core along the axis, using ultra‐violet light. Multiplexing applications will appear ranging from the small scale, with only a few sensors, up to very large scales with hundreds of sensors.

The purpose of this paper is to compare the sensing characteristics of uniform fiber Bragg grating (FBG) and tilted fiber Bragg grating (TFBG) by presenting a detailed research review. Temperature, axial strain, bending, vibration and refractive index measurands of FBG and TFBG sensor are presented and some significant differences are found.

Theoretical analysis and practical application in engineering are investigated and compared from other authors' research papers and self analysis. Spectra behavior of both FBG and TFBG are discussed.

There are found to be significant differences in temperature, axial strain, bending, vibration and refractive index sensing characteristics of FBG and TFBG.

The paper's analysis is comprehensive and clear and provides readers with the sensing characteristics of FBG and TFBG in detail.

The purpose of this paper is to look at fibreoptic sensing techniques and applications.

The paper provides information on fibreoptic sensing technologies, instrumentation, advantages and applications.

Fibreoptic sensing, especially fibreoptic Bragg gratings, provide a highly effective means of monitoring internal changes in structural and other components that were previously impossible or very difficult to detect. Such systems are now approaching full commercialisation.

The paper provides a useful overview of how fibreoptic sensors work, and the advantages they provide when used in instrumentation applications ranging from compact devices to large and complex structures, where they may be structurally integrated.

This paper aims to present an effective sensing detection system based on fiber Bragg grating (FBG) sensing technology for protective barriers that have been effectively applied to intercept and stop rocks from falling onto railway tracks. . Determination of exact stress and deformation values during impact tests for key components of the protective barrier forms important criteria for quality control of these barriers. Monitoring changes in force along the protective barrier when deployed in field application allows for real-time disaster warning for collapse and falling rocks.

In this paper, we propose a monitoring strategy for key components of a protective barrier. During performance tests, dynamic force and strain were measured for the steel strands and supporting I-beam, respectively. Design of a special elastic structure for the force transducer based on finite element analysis and tensile tests has been discussed here. Two types of FBG force transducers were manufactured based on the elastic structure. Four FBG force transducers and four FBG strain sensors were used for impact verification testing of a new rigid protective barrier with a design protection level of 25 KJ.

Dynamic force and strain responses were obtained during an impact of free-falling block with a kinetic energy of 25 KJ.

The FBG monitoring scheme can be extremely valuable for optimized design of the barrier and can provide real-time disaster warning in regions of collapse and falling rocks.