Search results

1 – 10 of over 4000
Open Access
Article
Publication date: 14 June 2019

Xiaoning Long

Innovation is the fundamental driving force for the long-term sustainable development of an economy. After four decades of rapid economic growth, China is facing crises related to…

6422

Abstract

Purpose

Innovation is the fundamental driving force for the long-term sustainable development of an economy. After four decades of rapid economic growth, China is facing crises related to a demographic structure of “aging before getting rich,” industrial overcapacity of low-end products and environmental and resources constraints. This paper aims to discuss these issues.

Design/methodology/approach

Based on logical analysis and recapitulation of previous empirical research, this study presents the conclusion.

Findings

Scientific and technological innovation, as strategic support to improve social productivity and overall national strength, must be placed at the center of the country’s overall development.

Originality/value

The development model that preys upon cheap resources for extensive growth is unsustainable. Thus, the country needs an urgent strategic switch to drive its economic growth through research and development innovation and original technological advancement.

Details

China Political Economy, vol. 2 no. 1
Type: Research Article
ISSN: 2516-1652

Keywords

Open Access
Article
Publication date: 13 March 2024

Tao Wang, Shaoliang Wu, Hengqiong Jia, Shanqing Peng, Haiyan Li, Piyan Shao, Zhao Wei and Yi Shi

During the construction process of the China Railway Track System (CRTS) I type filling layer, the nonwoven fabric bags have been used as grouting templates for cement asphalt…

Abstract

Purpose

During the construction process of the China Railway Track System (CRTS) I type filling layer, the nonwoven fabric bags have been used as grouting templates for cement asphalt (CA) emulsified mortar. The porous structure of nonwoven fabrics endowed the templates with breathability and water permeability. The standard requires that the volume expansion rate of CA mortar must be controlled within 1%–3%, which can generate expansion pressure to ensure that the cavities under track slabs are filled fully. However, the expansion pressure caused some of the water to seep out from the periphery of the filling bag, and it would affect the actual mix proportion of CA mortar. The differences in physical and mechanical properties between the CA mortar under track slabs and the CA mortar formed in the laboratory were studied in this paper. The relevant results could provide important methods for the research of filling layer materials for CRTS I type and other types of ballastless tracks in China.

Design/methodology/approach

During the inspection of filling layer, the samples of CA mortar from different working conditions and raw materials were taken by uncovering the track slabs and drilling cores. The physical and mechanical properties of CA mortar under the filling layer of the slab were systematically analyzed by testing the electrical flux, compressive strength and density of mortar in different parts of the filling layer.

Findings

In this paper, the electric flux, the physical properties and mechanical properties of different parts of CA mortar under the track slab were investigated. The results showed that the density, electric flux and compressive strength of CA mortar were affected by the composition of raw materials for dry powders and different parts of the filling layer. In addition, the electrical flux of CA mortar gradually decreased within 90 days’ age. The electrical flux of samples with the thickness of 54 mm was lower than 500 C. Therefore, the impermeability and durability of CA mortar could be improved by increasing the thickness of filling layer. Besides, the results showed that the compressive strength of CA mortar increased, while the density and electric flux decreased gradually, with the prolongation of hardening time.

Originality/value

During 90 days' age, the electrical flux of the CA mortar gradually decreased with the increase of specimen thickness and the electrical flux of the specimens with the thickness of 54 mm was lower than 500 C. The impermeability and durability of the CA mortar could be improved by increasing the thickness of filling layer. The proposed method can provide reference for the further development and improvement of CRTS I and CRTS II type ballastless track in China.

Details

Railway Sciences, vol. 3 no. 2
Type: Research Article
ISSN: 2755-0907

Keywords

Open Access
Article
Publication date: 25 August 2021

Weiwei Zhu, Jinglin Wu, Ting Fu, Junhua Wang, Jie Zhang and Qiangqiang Shangguan

Efficient traffic incident management is needed to alleviate the negative impact of traffic incidents. Accurate and reliable estimation of traffic incident duration is of great…

1506

Abstract

Purpose

Efficient traffic incident management is needed to alleviate the negative impact of traffic incidents. Accurate and reliable estimation of traffic incident duration is of great importance for traffic incident management. Previous studies have proposed models for traffic incident duration prediction; however, most of these studies focus on the total duration and could not update prediction results in real-time. From a traveler’s perspective, the relevant factor is the residual duration of the impact of the traffic incident. Besides, few (if any) studies have used dynamic traffic flow parameters in the prediction models. This paper aims to propose a framework to fill these gaps.

Design/methodology/approach

This paper proposes a framework based on the multi-layer perception (MLP) and long short-term memory (LSTM) model. The proposed methodology integrates traffic incident-related factors and real-time traffic flow parameters to predict the residual traffic incident duration. To validate the effectiveness of the framework, traffic incident data and traffic flow data from Shanghai Zhonghuan Expressway are used for modeling training and testing.

Findings

Results show that the model with 30-min time window and taking both traffic volume and speed as inputs performed best. The area under the curve values exceed 0.85 and the prediction accuracies exceed 0.75. These indicators demonstrated that the model is appropriate for this study context. The model provides new insights into traffic incident duration prediction.

Research limitations/implications

The incident samples applied by this study might not be enough and the variables are not abundant. The number of injuries and casualties, more detailed description of the incident location and other variables are expected to be used to characterize the traffic incident comprehensively. The framework needs to be further validated through a sufficiently large number of variables and locations.

Practical implications

The framework can help reduce the impacts of incidents on the safety of efficiency of road traffic once implemented in intelligent transport system and traffic management systems in future practical applications.

Originality/value

This study uses two artificial neural network methods, MLP and LSTM, to establish a framework aiming at providing accurate and time-efficient information on traffic incident duration in the future for transportation operators and travelers. This study will contribute to the deployment of emergency management and urban traffic navigation planning.

Details

Journal of Intelligent and Connected Vehicles, vol. 4 no. 2
Type: Research Article
ISSN: 2399-9802

Keywords

Open Access
Article
Publication date: 25 August 2022

Qiyuan Chen, Zebing Wei, Xiao Wang, Lingxi Li and Yisheng Lv

The purpose of this paper aims to model interaction relationship of traffic agents for motion prediction, which is critical for autonomous driving. It is obvious that traffic…

Abstract

Purpose

The purpose of this paper aims to model interaction relationship of traffic agents for motion prediction, which is critical for autonomous driving. It is obvious that traffic agents’ trajectories are influenced by physical lane rules and agents’ social interactions.

Design/methodology/approach

In this paper, the authors propose the social relation and physical lane aggregator for multimodal motion prediction, where the social relations of agents are mainly captured with graph convolutional networks and self-attention mechanism and then fused with the physical lane via the self-attention mechanism.

Findings

The proposed methods are evaluated on the Waymo Open Motion Dataset, and the results show the effectiveness of the proposed two feature aggregation modules for trajectory prediction.

Originality/value

This paper proposes a new design method to extract traffic interactions, and the attention mechanism is used in each part of the model to extract and fuse different relational features, which is different from other methods and improves the accuracy of the LSTM-based trajectory prediction method.

Details

Journal of Intelligent and Connected Vehicles, vol. 5 no. 3
Type: Research Article
ISSN: 2399-9802

Keywords

Open Access
Article
Publication date: 8 July 2020

Yang Li, Yaochen Qin, Liqun Ma and Ziwu Pan

The ecological environment of the Loess Plateau, China, is extremely fragile under the context of global warming. Over the past two decades, the vegetation of the Loess Plateau…

1360

Abstract

Purpose

The ecological environment of the Loess Plateau, China, is extremely fragile under the context of global warming. Over the past two decades, the vegetation of the Loess Plateau has undergone great changes. This paper aims to clarify the response mechanisms of vegetation to climate change, to provide support for the restoration and environmental treatment of vegetation on the Loess Plateau.

Design/methodology/approach

The Savitsky–Golay (S-G) filtering algorithm was used to reconstruct time series of moderate resolution imaging spectroradiometer (MODIS) 13A2 data. Combined with trend analysis and partial correlation analysis, the influence of climate change on the phenology and enhanced vegetation index (EVI) during the growing season was described.

Findings

The S-G filtering algorithm is suitable for EVI reconstruction of the Loess Plateau. The date of start of growing season was found to gradually later along the Southeast–Northwest direction, whereas the date of the end of the growing season showed the opposite pattern and the length of the growing season gradually shortened. Vegetation EVI values decreased gradually from Southeast to Northwest. Vegetation changed significantly and showed clear differentiation according to different topographic factors. Vegetation correlated positively with precipitation from April to July and with temperature from August to November.

Originality/value

This study provides technical support for ecological environmental assessment, restoration of regional vegetation coverage and environmental governance of the Loess Plateau over the past two decades. It also provides theoretical support for the prediction model of vegetation phenology changes based on remote sensing data.

Details

International Journal of Climate Change Strategies and Management, vol. 12 no. 4
Type: Research Article
ISSN: 1756-8692

Keywords

Open Access
Article
Publication date: 31 March 2023

Yong Chen, Zhixian Zhan and Wei Zhang

As the strategy of 5G new infrastructure is deployed and advanced, 5G-R becomes the primary technical system for future mobile communication of China’s railway. V2V communication…

Abstract

Purpose

As the strategy of 5G new infrastructure is deployed and advanced, 5G-R becomes the primary technical system for future mobile communication of China’s railway. V2V communication is also an important application scenario of 5G communication systems on high-speed railways, so time synchronization between vehicles is critical for train control systems to be real-time and safe. How to improve the time synchronization performance in V2V communication is crucial to ensure the operational safety and efficiency of high-speed railways.

Design/methodology/approach

This paper proposed a time synchronization method based on model predictive control (MPC) for V2V communication. Firstly, a synchronous clock for V2V communication was modeled based on the fifth generation mobile communication-railway (5G-R) system. Secondly, an observation equation was introduced according to the phase and frequency offsets between synchronous clocks of two adjacent vehicles to construct an MPC-based space model of clock states of the adjacent vehicles. Finally, the optimal clock offset was solved through multistep prediction, rolling optimization and other control methods, and time synchronization in different V2V communication scenarios based on the 5G-R system was realized through negative feedback correction.

Findings

The results of simulation tests conducted with and without a repeater, respectively, show that the proposed method can realize time synchronization of V2V communication in both scenarios. Compared with other methods, the proposed method has faster convergence speed and higher synchronization precision regardless of whether there is a repeater or not.

Originality/value

This paper proposed an MPC-based time synchronization method for V2V communication under 5G-R. Through the construction of MPC controllers for clocks of adjacent vehicles, time synchronization was realized for V2V communication under 5G-R by using control means such as multistep prediction, rolling optimization, and feedback correction. In view of the problems of low synchronization precision and slow convergence speed caused by packet loss with existing synchronization methods, the observer equation was introduced to estimate the clock state of the adjacent vehicles in case of packet loss, which reduces the impact of clock error caused by packet loss in the synchronization process and improves the synchronization precision of V2V communication. The research results provide some theoretical references for V2V synchronous wireless communication under 5G-R technology.

Details

Railway Sciences, vol. 2 no. 1
Type: Research Article
ISSN: 2755-0907

Keywords

Open Access
Article
Publication date: 6 April 2022

Huajing Ying, Huanhuan Ji, Xiaoran Shi and Xinyue Wang

In the presence of coronavirus disease 2019 (COVID-19), due to the social distance restriction, consumers' regular consumption behaviors and patterns have been changing…

1901

Abstract

Purpose

In the presence of coronavirus disease 2019 (COVID-19), due to the social distance restriction, consumers' regular consumption behaviors and patterns have been changing fundamentally. Thereafter, an innovative group buying model has emerged and developed explosively with a specific focus on consumer's location, known as community-based group buying (CGB). The purpose of this paper is to investigate the transfer mechanism of user's trust in dyadic contexts of social and commercial role-playing in the CGB program.

Design/methodology/approach

This study adopts an empirical research method, with an online and offline questionnaire survey, a total of 382 responses have been obtained. Then, both descriptive analysis and hierarchical regression analysis are conducted to explore the dual roles of group leader and its corresponding effects on consumers' trust (i.e. emotional trust and behavioral trust) and engagement actions (i.e. purchase and share) in the CGB program.

Findings

Results indicate that resident's trust and their perception of group leader's friend role can positively enhance their engagement actions in the CGB programs. Meanwhile, for the purpose of profit maximization, the group leader is more willing to play a friend role in transactions no matter whether the role conflict exists.

Originality/value

Research findings provide some managerial insights for CGB platform on the selection and training of group leaders and the incentive mechanism design.

Details

Modern Supply Chain Research and Applications, vol. 4 no. 2
Type: Research Article
ISSN: 2631-3871

Keywords

Open Access
Article
Publication date: 22 March 2022

Xiaoyu Yan, Weihua Liu, Victor Shi and Tingting Liu

The literature review aims to facilitate a broader understanding of on-demand service platform operations management and proposes potential research directions for scholars.

2955

Abstract

Purpose

The literature review aims to facilitate a broader understanding of on-demand service platform operations management and proposes potential research directions for scholars.

Design/methodology/approach

This study searches four databases for relevant literature on on-demand service platform operations management and selects 72 papers for this review. According to the research context, the literature can be divided into research on “a single platform” and research on “multiple platforms”. According to the research methods, the literature can be classified into “Mathematical Models”, “Empirical Studies”, “Multiple Methods” and “Literature Review”. Through comparative analysis, we identify research gaps and propose five future research agendas.

Findings

This paper proposes five research agendas for future research on on-demand service platform operations management. First, research can be done to combine classic research problems in the field of operations management with platform characteristics. Second, both the dynamic and steady-state issues of on-demand service platforms can be further explored. Third, research employing mathematical models and empirical analysis simultaneously can be more fruitful. Fourth, more research efforts on the various interactions among two or more platforms can be pursued. Last but not least, it is worthwhile to examine new models and paths that have emerged during the latest development of the platform economy.

Originality/value

Through categorizing the literature into two research contexts as well as classifying it according to four research methods, this article clearly shows the research progresses made so far in on-demand service platform operations management and provides future research directions.

Details

Modern Supply Chain Research and Applications, vol. 4 no. 2
Type: Research Article
ISSN: 2631-3871

Keywords

Open Access
Article
Publication date: 10 February 2023

Junting Lin, Mingjun Ni and Huadian Liang

This study aims to propose an adaptive fractional-order sliding mode controller to solve the problem of train speed tracking control and position interval control under…

Abstract

Purpose

This study aims to propose an adaptive fractional-order sliding mode controller to solve the problem of train speed tracking control and position interval control under disturbance environment in moving block system, so as to improve the tracking efficiency and collision avoidance performance.

Design/methodology/approach

The mathematical model of information interaction between trains is established based on algebraic graph theory, so that the train can obtain the state information of adjacent trains, and then realize the distributed cooperative control of each train. In the controller design, the sliding mode control and fractional calculus are combined to avoid the discontinuous switching phenomenon, so as to suppress the chattering of sliding mode control, and a parameter adaptive law is constructed to approximate the time-varying operating resistance coefficient.

Findings

The simulation results show that compared with proportional integral derivative (PID) control and ordinary sliding mode control, the control accuracy of the proposed algorithm in terms of speed is, respectively, improved by 25% and 75%. The error frequency and fluctuation range of the proposed algorithm are reduced in the position error control, the error value tends to 0, and the operation trend tends to be consistent. Therefore, the control method can improve the control accuracy of the system and prove that it has strong immunity.

Originality/value

The algorithm can reduce the influence of external interference in the actual operating environment, realize efficient and stable tracking of trains, and ensure the safety of train control.

Details

Railway Sciences, vol. 2 no. 1
Type: Research Article
ISSN: 2755-0907

Keywords

Open Access
Article
Publication date: 19 March 2024

Mazignada Sika Limazie and Soumaïla Woni

The present study investigates the effect of foreign direct investment (FDI) and governance quality on carbon emissions in the Economics Community of West African States (ECOWAS).

Abstract

Purpose

The present study investigates the effect of foreign direct investment (FDI) and governance quality on carbon emissions in the Economics Community of West African States (ECOWAS).

Design/methodology/approach

To achieve the objective of this research, panel data for dependent and explanatory variables over the period 2005–2016, collected in the World Development Indicators (WDI) database and World Governance Indicators (WGI), are analyzed using the generalized method of moments (GMM). Also, the panel-corrected standard errors (PCSE) method is applied to the four segments of the overall sample to analyze the stability of the results.

Findings

The findings of this study are: (1) FDI inflows have a negative effect on carbon emissions in ECOWAS and (2) The interaction between FDI inflows and governance quality have a negative effect on carbon emissions. These results show the decreasing of environmental damage by increasing institutional quality. However, the estimation results on the country subsamples show similar and non-similar aspects.

Practical implications

This study suggests that policymakers in the ECOWAS countries should strengthen their environmental policies while encouraging FDI flows to be environmentally friendly.

Originality/value

The subject has rarely been explored in West Africa, with gaps such as the lack of use of institutional variables. This study contributes to the literature by drawing on previous work to examine the role of good governance on FDI and the CO2 emission relationship in the ECOWAS, which have received little attention. However, this research differs from previous work by subdividing the overall sample into four groups to test the stability of the results.

Details

Journal of Economics and Development, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 1859-0020

Keywords

1 – 10 of over 4000