Search results

This paper aims to analyse the let-down stability of the binder-free dispersion of non-printing ink grades of carbon black and to assess the screen-printability of the finished inks formulated thereof from these pigment dispersions.

Binder-free pigment dispersions that were prepared and optimised following a ladder series of experiments (reported in a separate study by the authors) were let-down with three different binders such that inks containing various amounts of a binder were prepared followed by a rheological characterisation immediately after formulation and after four weeks of storage. The screen printability of the inks that displayed considerable stability was assessed, so was the ink film integrity.

The pigment dispersions that were considered in the present study were generally found to be stable after let-down with different binders. This was indicated by the fact that the finished inks possessed a shear thinning viscosity profiles, after formulation and after storage, in most of the cases. Furthermore, the screen printability of the inks was also found to be good in terms of registration quality of a selected design. The structure of the ink film deposits on uncoated and binder-coated textile fabrics was also highly integrated and free from discontinuities.

Carbon blacks with very low volatile matter content and/or high surface area are generally not considered suitable for use in the formulation of printing inks. This is because of their generally poor dispersability and inability to form dispersions that remain stable over extended periods. This work, which is a part of a larger study by the authors, concerns with the stability of inks formulated from binder-free dispersions of such non-printing ink grades of carbon black. The major advantage of using such pigments in inks is that the required functionality is achieved at considerably low pigment loadings.

The purpose of this study is to explain the effects of screen printing parameters on the quantity of ink deposited and the print quality in the context of printing of functional inks. Both these aspects of printing are crucial in the case of conventional and functional printing. This is because, in the case of conventional printing, the quantity of ink deposit affects the color strength while in the case of functional printing, it directly affects the resulting functionality of the ink layer.

In this work, an automatic lab-scale screen printer was used to print functional inks on a paper board substrate. The printing parameters, i.e. printing pressure and squeegee angle were altered and the resulting effects on the quantity of ink that was deposited were recorded. The quantity of ink deposit was related to its surface resistivity. In addition, the quality of the print was also assessed by examining the design registration quality.

The authors found that altering the squeegee angle has a significant effect on the properties of the resulting ink deposit. More importantly, the authors found that the deflection in the rubber blade squeegee was greatly dependent on the initial angle of the squeegee at the start of the printing stroke. For each set value of the squeegee angle that was considered, the actual angle during printing was recorded and used in the analysis. A printing pressure of three bars and squeegee angle of 20° resulted in the maximum weight of ink deposit with a correspondingly lowest surface resistivity.

This study is envisaged to have considerable practical implications in the rapidly growing field of functional printing of flexible substrates including, but not limited to, textiles. This is because, the study provides an insight into the effects of printing parameters on the characteristics of a functional ink deposit.

Screen printing of flexible substrates is a well-developed and arguably the most widely used printing technique, particularly for textiles. Numerous studies report on the analysis of various aspects of screen printing. However, to the best of the knowledge, the effects of printing parameters on the characteristics of functional inks, such as electrically conductive inks, have not been studied in this manner.

This paper aims to synthesise and evaluate the properties of a novel smart material consisting of a metal-free organic black pigment with a unique chromophore for bifunctional applications in optoelectronics.

A robust and highly efficient organic reaction, namely, a double [2 + 2] cycloaddition, was deployed to transform a rod-like structure for charge-transfer applications to a strongly conjugated light-absorbing molecule for both optical and electronic applications.

The synthesis and characterisation of an air-stable metal-free black pigment is reported, which contains an unconventional donor–acceptor panchromatic chromophore with an absorption window spanning 600 nm; the compound was synthetically converted from an organic semiconducting molecular rod and retains strong charge-transfer properties. The chromophore comprises tetracyanoquinodimethane adduct on either side of a dithienothiophenyl core, capped with hexyl thiophenes that ensure solubility in common organic solvents. Its propensity to form excellent thin films on different substrates such as glass and paper, with a total opacity in organic solvent, gives it the potential for wide-ranging applications in organic optoelectronics.

The synthetic chemistry and fundamental properties are investigated in the present study, with more detailed treatments and analysis to be soon developed. One leading smart material is presented, with further derivatives under investigation.

The work presented shows the possibility of converting structures from one application to another with relative ease, but how they retain properties for both, using well-known and facile conditions.

The structures are novel and an enhanced air-stable organic panchromatic chromophore is reported for processing in common organic solvents.

Pretreatment of fabric with a number of chemicals and auxiliaries is a prerequisite for inkjet printing. Owing to the rapidly increasing use of inkjet printing for textile fabrics, the study of the effects of process variables on various characteristics of the resulting print has drawn considerable interest recently. The purpose of this paper is to study the effects of different variables associated with the inkjet printing process on the quality of the resulting print. Specifically, the effects of chemicals and auxiliaries used in the pretreatment of the fabric prior to printing and factors such as steaming time were studies.

In the present study, which forms a part of a larger study by the authors, the influence of the nature of thickener, the amounts of thickener, urea and alkali, pH of the pretreatment liquor and the duration of steaming on ink penetration into the printed fabrics and the ink spreading across the fabrics was studied. The nature of ink penetration and ink spreading are known to have pronounced effects on the quality and, in turn, the overall appearance of the resulting print. A set of experiments based on a blocked 2^5–1 fractional factorial design with four centre points were conducted to evaluate the role of the aforementioned five variables. Ink penetration was quantified on the basis of the principles of Kebulka-Munk theory while ink spreading was analysed by image analysis.

Detailed statistical analyses of the experimental data obtained show that different thickeners perform differently and can have a marked influence on ink penetration and ink spreading. In the case of polyacrylic acid-based thickener, changing the levels of the factors has a marked effect on ink penetration and in-turn on ink spreading. In the case of polyacrylamide (PAM)-based thickener, on the other hand, the effect of changing the levels of various factors on the ink penetration and ink spreading is considerably less pronounced. In addition, PAM treated samples exhibited better performance in terms of ink penetration and spreading.

This study provides useful information for textile printers and highlights the importance of selecting the right type of thickener to make the printing process and the quality of the resulting print more predictable and controllable.

The purpose of this study is to identify the most influential factors affecting the printing properties and print quality of digitally printed silk fabrics in terms of colour strength and fixation percentage.

In this study, five factors (concentration of thickener, concentration of urea, concentration of alkali, pH of pretreatment liquor and steaming duration) were investigated using a blocked 2⁵⁻¹ fractional factorial experiment. The type of thickeners [polyacrylic acid and polyacrylamide (PAM)] were considered as a block.

Linear models were obtained and statistically tested using both analysis of variance and coefficient of determination (R²), and they were found to be accurate at 90 per cent confidence level. It was revealed that concentration of alkali, concentrations of urea and pH of the pretreatment liquor had an increasing effect on colour strength, whereas concentration of thickener and steaming duration showed decreasing effect on colour strength of digitally printed silk fabrics. Furthermore, concentration of alkali, concentrations of urea had increasing effect on dye fixation percentage, whereas steaming duration showed decreasing effect on dye fixation percentage of digitally printed silk fabrics. In addition, PAM thickener based pretreatment recipe exhibited better printing properties for the digitally printing of silk fabrics.

The main influences and significant two-factor interactions were discussed in detail to gain a better understanding of the printing properties of digitally printed silk fabrics. The findings of this study are useful for further optimisation of pre- and post-treatment processes for digital printing of silk fabrics.

The purpose of this paper is to prepare, characterise and evaluate nano-emulsions of copolymers of various compositions as eco-friendly binders for flexographic ink industry.

Various nano-emulsions of copolymers were prepared using styrene (St), butyl acrylate (BuAc), acrylic acid (AA) and acrylamide (AAm) monomers by means of a conventional seeded emulsion polymerisation technique, using K2S2O8 as the initiator. The characterisation of the prepared emulsions was performed using Fourier transform infrared (FT-IR), thermogravimetric analysis (TGA), gel permeation chromatography (GPC) and transmission electron microscopy (TEM). A selection of copolymers was formulated with pigments and additional ingredients, as water-based flexographic inks. The inks were characterised for their viscosity, pH, degree of dispersion, water resistance and colour density.

It was found that the low viscosity of the prepared copolymers may reduce the film thickness of the flexographic inks and may also increase the spreading of the ink on the surface. As a result, stable modified polyacrylate-based latex with improved physico-mechanical properties were obtained. The prepared latexes were showed improving and enhancing in water resistance; gloss values, and the print density that ranged from 2.06 to 2.51 and the maximum gloss values (39 and 48) were also obtained. Also, these binders provide excellent adhesion properties for both the pigment particles and the base paper.

This study focuses on the preparation of new water-based copolymer nanoparticles and their use as eco-friendly binders for flexographic ink industry.

The ink formulations developed could find use in industrial-scale printing.

Eco-friendly environment ink formulations for printing on paper substrates are novel.

This paper aims to investigate the best methods of utilisation of reclaimed asphalt pavements (RAP) in Egypt, to determine the effect of using 100% RAP instead of using virgin aggregates and asphalt; investigate the effect of thermoplastic elastomer polymer as asphalt modifier; and also improve the mechanical and physical characteristics and consequently improving the quality of asphalt paving, increasing service life of asphalt-paving and reducing costs.

Nano acrylate terpolymers were prepared with different % (Wt.) of and were characterised by Fourier transforms infrared (FTIR), for molecular weight (Mw), by thermo gravimetric analysis (TGA) and by transmission electron microscopy (TEM). A 4% (Wt.) of the prepared nanoemulsion terpolymer was mixed with virgin asphalt as a polymer modifier, to improve and reuse of the RAP. The modified binder was tested. The tests conducted include penetration, kinematic viscosity, softening point and specific gravity. Application of Marshall mix design types; hot mix asphalt (HMA), warm mix asphalt (WMA) and cold in place recycled (CIR). Four different mix designs used; control mix contained virgin asphalt by HMA, and the other three mix designs were polymermodified asphalt sample by HMA, WMA and CIR.

The research results showed that using 4 Wt.% of the prepared nanoemulsion terpolymer to produce hot mix asphalt (HMA) and warm mix asphalt (WMA) achieved higher stability compared to the control mix and cold in place recycled (CIR).

This paper discusses the preparation and the characterisation of nanoemulsion and its application in RAPs to enhance and improve the RAP quality.

Nano-acrylate terpolymer can be used as a new polymer to modify asphalt to achieve the required specifications for RAP.

According to the most recent surveys, Europe produced 265 tonnes of asphalt for road applications in 2014, while the amount of available RAP was more than 50 tonnes. The use of RAP in new blended mixes reduces the need of neat asphalt, making RAP recycling economically attractive.

This paper aims to synthesize new screen-printing ink formula based on new derivatives of azo thiadiazol disperse dyes and evaluate their characteristics after being printed on polyester fabric substrates.

New dispersed dyes based on 1, 3, 4-Thiadiazole derivatives (dyes 1 and 2) were prepared and confirmed by different analyses, infrared (IR), mass and nuclear magnetic resonance (NMR) spectroscopy, and then formulated as colored materials in the screen-printing ink formulations. Printing pastes containing the prepared dyestuffs and other ingredients were used for printing polyester using screen-printing or traditional printing. The characteristics of printed polyester fabric substrates were measured by color measurements such as a*, b*, L*, C*, E, Ho, R% and color strength, as well as light, washing, crock and alkali perspiration fastness, and finally, the depth of penetration was evaluated.

The prepared 1, 3, 4-Thiadiazole derivatives (dyes 1 and 2) were obtained from the reaction of 5,5’-(1,4-phenylene)bis(1,3,4-Thiadiazole-2-amine) with resorcinol and m-toluidine as a coupling component. The suitability of the prepared dyestuffs for silk screen-printing on polyester fabrics has been investigated. The prints obtained from a formulation containing dye 1 possess high color strength as well as good overall fastness properties if compared to those obtained using dye 2.

The method of synthesis of the new dyestuffs and screen-printing ink provides a simple and practical solution to prepare some new heterocyclic disperse azo dyes, and they are formulated in the screen-printing inks for printing on a polyester fabric substrate.

The prepared disperse dyes based on 1,3,4-Thiadiazole derivatives (dyes 1 and 2) could be used in textile printing of polyester on an industrial scale.

The purpose of this paper is to develop an effective approach to significantly improve the thermomechanical properties of shape memory polymer (SMP) nanocomposites that show fast thermally responsive shape recovery.

Hexagonal boron nitrides (h-BNs) were incorporated into polymer matrix in an attempt to improve the thermal conductivity and thermally responsive shape recovery behaviour of SMP, respectively. Thermally actuated shape recovery behaviour was recorded and monitored instrumentally.

The results show that both glass transition temperature (T_g) and thermomechanical properties of the SMP nanocomposites have been progressively improved with increasing concentration of h-BNs. Analytical results also suggest that the fast-responsive recovery behaviour of the SMP nanocomposite incorporated with h-BNs was due to the increased thermal conductivity.

A simple way for fabricating SMP nanocomposites with enhanced thermally responsive shape recovery based on the incorporation of h-BNs was developed.

The outcome of this study may help fabrication of SMP nanocomposites with fast responsive recovery behaviour.

The purpose of this study was to optimise the dyeing conditions to achieve right-first-time dyeing in hard water. Owing to the persistent water scarcity for more than two decades now, the textile industry in Pakistan is forced to rely on high-mineral-content ground water for use in textile wet processing. Furthermore, the limited amount of municipal water that is at the disposal of the textile industry is also high in mineral content. Thus, on the large scale, water hardness has become an acute problem for the textile processor. In particular, in the dyeing process, water hardness is known to have crucial effects. However, to-date, no systematic study has been conducted on this aspect of textile dyeing.

In this study, 3² full factorial design was used to optimise the dyeing conditions to achieve right-first-time dyeing in hard water. Thus, cotton fabric was dyed with Red Reactive dye (of dyebath concentration at 5, 10 and 15 g/L) in prepared hard water (of hardness at 10, 40 and 70°dH), respectively. Analysis of variance, coefficient of determination (R²) and p-values for the models were used to evaluate the adequacy of the predictive models. The surface plots of the effects were studied to further examine the interactions of two independent variables. Derringer’s desirability function was used to determine the optimum levels of each variable.

Three levels for both independent variables generate second-order polynomial models to predict the colour strength, lightness, red/green, yellow/blue and total colour difference values of dyed cotton. The obtained predictive models point out the considerable influence of both water hardness and dye concentration on right-first-time dyeing.

Such a finding enabled the dye-mill to produce the correct shade at water hardness of 10°dH and 15 g/L dye concentration, without the need for corrective reprocessing.