Search results

This study aims to examine ship loading strategies during large-scale military deployments. Ships are usually loaded to a stowage goal of about 65% of the ship's capacity. The authors identify how much cargo to load onto ships for each sailing and propose lower stowage goals that could improve the delivery of forces during the deployment.

The authors construct several mixed integer programs to identify optimal ship loading strategies that minimize delivery timelines for notional, but realistic, problem variables. The authors study the relative importance of these variables using experimental designs, regressions, correlations and chi-square tests of the empirical results.

The research specifies the conditions during which ships should be light loaded, i.e. loaded to less than 65% of total capacity. Empirical results show cargo delivered up to 16% faster with a light-loaded strategy compared to fully loaded ships.

This work assumes deterministic sailing times and ship loading times. Also, all timing aspects of the problem are estimated to the nearest natural number of days.

This research provides important new insights about optimal ship loading strategies, which were not previously quantified. More importantly, logistics planners could use these insights to reduce sealift delivery timelines during military deployments.

Most ship routing and scheduling problems minimize costs as the primary goal. This research identifies the situations in which ships transporting military forces should be light loaded, thereby trading efficiency for effectiveness, to enable faster overall delivery of unit equipment to theater seaports.

Beijing rail transit can actively control the density of rail transit passenger flow, ensure travel facilities and provide a safe and comfortable riding atmosphere for rail transit passengers during the epidemic. The purpose of this paper is to efficiently monitor the flow of rail passengers, the first method is to regulate the flow of passengers by means of a coordinated connection between the stations of the railway line; the second method is to objectively distribute the inbound traffic quotas between stations to achieve the aim of accurate and reasonable control according to the actual number of people entering the station.

This paper analyzes the rules of rail transit passenger flow and updates the passenger flow prediction model in time according to the characteristics of passenger flow during the epidemic to solve the above-mentioned problems. Big data system analysis restores and refines the time and space distribution of the finely expected passenger flow and the train service plan of each route. Get information on the passenger travel chain from arriving, boarding, transferring, getting off and leaving, as well as the full load rate of each train.

A series of digital flow control models, based on the time and space composition of passengers on trains with congested sections, has been designed and developed to scientifically calculate the number of passengers entering the station and provide an operational basis for operating companies to accurately control flow.

This study can analyze the section where the highest full load occurs, the composition of passengers in this section and when and where passengers board the train, based on the measured train full load rate data. Then, this paper combines the full load rate control index to perform reverse deduction to calculate the inbound volume time-sharing indicators of each station and redistribute the time-sharing indicators for each station according to the actual situation of the inbound volume of each line during the epidemic. Finally, form the specified full load rate index digital time-sharing passenger flow control scheme.

This paper aims to overcome the limitations of low efficiency, low power density and strong electromagnetic interference (EMI) of the existing pulsed melt inert gas (MIG) welding power supply. So a novel and simplified implementation of digital high-power pulsed MIG welding power supply with LLC resonant converter is proposed in this work.

A simple parallel full-bridge LLC resonant converter structure is used to design the digital power supply with high welding current, low arc voltage, high open-circuit voltage and a wide range of arc loads, by effectively exploiting the variable load and high-power applications of LLC resonant converter.

The efficiency of each converter can reach up to 92.3%, under the rated operating condition. Notably, with proposed scheme, a short-circuit current mutation of 300 A can stabilize at 60 A within 8 ms. Furthermore, the pulsed MIG welding test shows that a stable welding process with 280 A peak current can be realized and a well-formed weld bead can be obtained, thereby verifying the feasibility of LLC resonant converter for pulsed MIG welding power supply.

The high efficiency, high power density and weak EMI of LLC resonant converter are conducive to the further optimization of pulsed MIG welding power supply. Consequently, a high performance welding power supply is implemented by taking adequate advantages of LLC resonant converter, which can provide equipment support for exploring better pulsed MIG welding processes.

Health risks associated with coronavirus disease 2019 (COVID-19) have severely affected the financial stability of airline companies globally. Recapturing financial stability following this crisis depends heavily on these companies’ ability to attain efficient and productive operations. This study uses several empirical approaches to examine key factors contributing to carriers sustaining high productivity prior to, during and after a major recession. Findings suggest, regardless of economic conditions, that social distancing which requires airline companies in the Asia Pacific region to fly with a significant percentage of unfilled seats weakens the performance of those companies. Furthermore, efficient operations do not guarantee the avoidance of productivity declines, especially during a recession.

Large displacement misalignment under the action of active faults can cause complex three-dimensional deformation in subway tunnels, resulting in severe damage, distortion and misalignment. There is no developed system of fortification and related codes to follow. There are scientific problems and technical challenges in this field that have never been encountered in past research and practices.

This paper adopted a self-designed large-scale active fault dislocation simulation loading system to conduct a similar model test of the tunnel under active fault dislocation based on the open-cut tunnel project of the Urumqi Rail Transit Line 2, which passes through the Jiujiawan normal fault. The test simulated the subway tunnel passing through the normal fault, which is inclined at 60°. This research compared and analyzed the differences in mechanical behavior between two types of lining section: the open-cut double-line box tunnel and the modified double-line box arch tunnel. The structural response and failure characteristics of the open-cut segmented lining of the tunnel under the stick-slip part of the normal fault were studied.

The results indicated that the double-line box arch tunnel improved the shear and longitudinal bending performance. Longitudinal cracks were mainly distributed in the baseplate, wall foot and arch foot, and the crack position was basically consistent with the longitudinal distribution of surrounding rock pressure. This indicated that the longitudinal cracks were due to the large local load of the cross-section of the structure, leading to an excessive local bending moment of the structure, which resulted in large eccentric failure of the lining and formation of longitudinal cracks. Compared with the ordinary box section tunnel, the improved double-line box arch tunnel significantly reduced the destroyed and damage areas of the hanging wall and footwall. The damage area and crack length were reduced by 39 and 59.3%, respectively. This indicates that the improved double-line box arch tunnel had good anti-sliding performance.

This paper adopted a self-designed large-scale active fault dislocation simulation loading system to conduct a similar model test of the tunnel under active fault dislocation. This system increased the similarity ratio of the test model, improved the dislocation loading rate and optimized the simulation scheme of the segmented flexible lining and other key factors affecting the test. It is of great scientific significance and engineering value to investigate the structure of subway tunnels under active fault misalignment, to study its force characteristics and damage modes, and to provide a technical reserve for the design and construction of subway tunnels through active faults.

The purpose of this paper is to improve the tactical planning of the stakeholders of the midstream liquefied natural gas (LNG) supply chain, using an optimisation approach. The results can contribute to enhance the proactivity on significant investment decisions.

A decision support tool (DST) is proposed to minimise the operational cost of a fleet of vessels. Mixed integer linear programming (MILP) used to perform contract assignment combined with a genetic algorithm solution are the foundations of the DST. The aforementioned methods present a formulation of the maritime transportation problem from the scope of tramp shipping companies.

The validation of the DST through a realistic case study illustrates its potential in generating quantitative data about the cost of the midstream LNG supply chain and the annual operations schedule for a fleet of LNG vessels.

The LNG transportation scenarios included assumptions, which were required for resource reasons, such as omission of stochasticity. Notwithstanding the assumptions made, it is to the authors’ belief that the paper meets its objectives as described above.

Potential practitioners may exploit the results to make informed decisions on the operation of LNG vessels, charter rate quotes and/or redeployment of existing fleet.

The research has a novel approach as it combines the creation of practical management tool, with a comprehensive mathematical modelling, for the midstream LNG supply chain. Quantifying future fleet costs is an alternative approach, which may improve the planning procedure of a tramp shipping company.

This study aims to propose a vertical coupling dynamic analysis method of vehicle–track–substructure based on forced vibration and use this method to analyze the influence on the dynamic response of track and vehicle caused by local fastener failure.

The track and substructure are decomposed into the rail subsystem and substructure subsystem, in which the rail subsystem is composed of two layers of nodes corresponding to the upper rail and the lower fastener. The rail is treated as a continuous beam with elastic discrete point supports, and spring-damping elements are used to simulate the constraints between rail and fastener. Forced displacement and forced velocity are used to deal with the effect of the substructure on the rail system, while the external load is used to deal with the reverse effect. The fastener failure is simulated with the methods that cancel the forced vibration transmission, namely take no account of the substructure–rail interaction at that position.

The dynamic characteristics of the infrastructure with local diseases can be accurately calculated by using the proposed method. Local fastener failure will slightly affect the vibration of substructure and carbody, but it will significantly intensify the vibration response between wheel and rail. The maximum vertical displacement and the maximum vertical vibration acceleration of rail is 2.94 times and 2.97 times the normal value, respectively, under the train speed of 350 km·h⁻¹. At the same time, the maximum wheel–rail force and wheel load reduction rate increase by 22.0 and 50.2%, respectively, from the normal value.

This method can better reveal the local vibration conditions of the rail and easily simulate the influence of various defects on the dynamic response of the coupling system.

This study aims to ensure the operation safety of high speed trains, it is necessary to carry out nondestructive monitoring of the tensile damage of the gearbox housing material in rail time, yet the traditional tests of mechanical property can hardly meet this requirement.

In this study the acoustic emission (AE) technology is applied in the tensile tests of the gearbox housing material of an high-speed rail (HSR) train, during which the acoustic signatures are acquired for parameter analysis. Afterward, the support vector machine (SVM) classifier is introduced to identify and classify the characteristic parameters extracted, on which basis the SVM is improved and the weighted support vector machine (WSVM) method is applied to effectively reduce the misidentification of the SVM classifier. Through the study of the law of relations between the characteristic values and the tensile life, a degradation model of the gearbox housing material amid tensile is built.

The results show that the growth rate of the logarithmic hit count of AE signals and that of logarithmic amplitude can well characterize the stage of the material tensile process, and the WSVM method can improve the classification accuracy of the imbalanced data to above 94%. The degradation model built can identify the damage occurred to the HSR gearbox housing material amid the tensile process and predict the service life remains.

The results of this study provide new concepts for the life prediction of tensile samples, and more further tests should be conducted to verify the conclusion of this research.

Bearings in electric machines often work in high speed, light load and vibration load conditions. The purpose of this paper is to find a new fatigue damage accumulation rating life model of ball bearings, which is expected for calculating fatigue life of ball bearings more accurately under vibration load, especially in high speed and light load conditions.

A new fatigue damage accumulation rating life model of ball bearings considering time-varying vibration load is proposed. Vibration equations of rotor-bearing system are constructed and solved by Runge–Kutta method. The modified rating life and modified reference rating life model under vibration load is also proposed. Contrast of the three fatigue life models and the influence of dynamic balance level, rotating speed, preload of ball bearings on bearing’s fatigue life are analyzed.

To calculate fatigue rating life of ball bearings more accurately under vibration load, especially in high speed and light load conditions, the fatigue damage accumulation rating life model should be considered. The optimum preload has an obvious influence on fatigue rating life.

This paper used analytical method and model that is helpful for design of steel ball bearing in high speed, light load and vibration load conditions.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-05-2019-0180/

In addition to agriculture, energy production, and industries, potable water plays a significant role in many fields, further increasing the demand for potable water. Purification and desalination play a major role in meeting the need for clean drinking water. Clean water is necessary in different areas, such as agriculture, industry, food industries, energy generation and in everyday chores.

The authors have used the different search engines like Google Scholar, Web of Science, Scopus and PubMed to find the relevant articles and prepared this mini review.

The various stages of water purification include coagulation and flocculation, coagulation, sedimentation and disinfection, which have been discussed in this mini review. Using nanotechnology in wastewater purification plants can minimize the cost of wastewater treatment plants by combining several conventional procedures into a single package.

In society, we need to avail clean water to meet our everyday, industrial and agricultural needs. Purification of grey water can meet the clean water scarcity and make the environment sustainable.

This mini review will encourage the researchers to find out ways in water remediation to meet the need of pure water in our planet and maintain sustainability.