Search results

This study aims to use a machine learning (ML) model for the prediction of traction coefficient and asperity load ratio for different surface topographies of non-conformal rough contacts.

The input data set for the ML model is generated using a mixed-lubrication model. Surface topography parameters (skewness, kurtosis and pattern ratio), rolling speed and hardness are used as input features in the multi-layer perceptron (MLP) model. The hyperparameter tuning and fivefold cross-validation are also performed to minimize the overfitting.

From the results, it is shown that the MLP model shows excellent accuracy (R² > 90%) on the test data set for making the prediction of mixed lubrication parameters. It is also observed that engineered rough surfaces with high negative skewness, low kurtosis and isotropic surface patterns exhibit a significant low traction coefficient. It is also concluded that the MLP model gives better accuracy in comparison to the random forest regression model based on the training and testing data sets.

Mixed lubrication parameters are predicted by developing a regression-based MLP model. The machine learning model is trained using several topography parameters, which are vital in the mixed-EHL regime because of the lack of regression-fit expressions in previous works. The accuracy of MLP with random forest models is also compared.

Aluminum alloy is considered an ideal material in aerospace, automobile and other fields because of its lightweight, high specific strength and easy processing. However, low hardness and strength of the surface of aluminum alloys are the main factors that limit their applications. The purpose of this study is to obtain a composite coating with high hardness and lubricating properties by applying GO–PVA over MAO coating.

A pulsed bipolar power supply was used as power supply to prepare the micro-arc oxidation (MAO) coating on 6061 aluminum sample. Then a graphene oxide-polyvinyl alcohol (GO–PVA) composite coating was prepared on MAO coating for subsequent experiments. Samples were characterized by Fourier infrared spectroscopy, X-ray diffraction, Raman spectroscopy and thermogravimetric analysis. The friction test is carried out by the relative movement of the copper ball and the aluminum disk on the friction tester.

Results showed that the friction coefficient of MAO samples was reduced by 80% after treated with GO–PVA composite film.

This research has made a certain contribution to the surface hardness and tribological issues involved in the lightweight design of aluminum alloys.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-12-2023-0427/

The purpose of this study is to investigate the effect of anarchist accounting (AA) on stakeholder relationship capability (SRC) in the context of Iranian capital market companies.

This study is based on a descriptive survey-correlation data collection method. As this study is on (AA) and (SRC) in Iran, the population of the study is made up of all financial managers and heads of the accounting department of capital market companies in Iran. Among 185 companies (Tehran Stock Exchange [TSE]), 100 companies were selected as samples which are all in the TSE. As suggested by Niles (2006), a minimum sample size of 10% of the population is generally acceptable. A questionnaire survey was adopted in obtaining primary data for this study. Thus, based on Cochran sampling techniques, 395 questionnaires were returned and became the basis of analysis. Also, partial least square was used to test the research hypothesis.

The statistical findings indicate the fit of the structural desirability of the factor load and according to the standardized coefficient (path coefficient), the dimensions of AA have a negative and significant effect on SRC, because the path coefficient is positive.

Theoretically, to the best of the authors’ knowledge, this study is the first research that tries to examine the stakeholder relationship capability through the link between social/political approaches with accounting procedures, an issue that has not been considered in any prior study. Also, conducting the present study in the conditions of social distrust in the Iranian capital market can be important, because the expansion of anarchist accounting helps to create a level of symmetry and equality in information disclosure and it can create value for shareholders.

This study aims to empirically examine the relationships among perceived environmental uncertainty (EV), the level of knowledge distance (KD) and the impact of value network on firm performance.

The quantitative analysis is based on data from 243 Chinese companies with engineering, procurement and construction (EPC) business in the context of the COVID-19 pandemic.

The two dimensions of value network [network centrality (NC) and network openness (NO)] have a different impact on firm performance [financial performance (FP) and market performance (MP)]. NC has a positive impact on FP, but not on MP. NO has a positive effect on MP, but not on FP. A reduced KD mediates the relationship between value network and firm performance. Moreover, it fully mediates the relationship between NC and MP, NO and FP. Finally, during the COVID-19 pandemic, only EV has a moderating effect on KD and MP.

This study is limited in terms of data set because it relies on a limited amount of cross-sectional data from one specific country. Therefore, researchers are encouraged to test the proposed propositions further.

The present findings suggest that EPC professionals should pay more attention to the EV, which may be impacted by policy, technology and the economy. This research has actionable implications for the reform of EPC in the construction industry, and practical recommendations for EPC firms to improve their corporate performance.

The results measure the complementary effects of both dimensions of value network (NC and NO) on two distinct aspects of firm performance (MP and FP) and assess the moderating effect of EV and KD in the context of the COVID-19 pandemics.

The main aim of this study is to examine the effect of virtual store atmospheric factors on impulsive purchasing in the metaverse context.

Grounded in purposive sampling, 451 individuals with previous metaverse experience were recruited to accomplish the objectives of this research. Next, to identify both linear and nonlinear relationships, the data were analyzed using partial least squares structural equation modeling (PLS-SEM) and artificial neural network (ANN) approaches.

The findings underscore the significance of the virtual store environment and online trust in shaping impulsive buying behaviors within the metaverse retailing setting. Theoretically, this study elucidates the impact of virtual store atmosphere and trust on impulsive buying within a metaverse retail setting.

From the findings of the study, because of the importance of virtual shop content, practitioners must address its role in impulse purchases via affective online trust. The study’s findings are likely to help retailers strategize and improve their virtual store presentations in the metaverse.

The discovery adds to the understanding of consumer behavior in the metaverse by probing the roles of virtual store atmosphere, online trust and impulsive buying.

The purpose of this paper is to reveal the dynamic contact characteristics of the slip ring. Dynamic contact resistance models considering wear and self-excited were established based on fractal theory.

The effects of tangential velocity, stiffness and damping coefficient on dynamic contact resistance are studied. The relationships between fractal parameters, wear time and contact parameters are revealed.

The results show that the total contact area decreases with the friction coefficient and fractal roughness under the same load. Self-excited vibration occurs at a low speed (less than 0.6 m/s). It transforms from stick-slip motion at 0.4 m/s to pure sliding at 0.5 m/s. A high stiffness makes contact resistance fluctuate violently, while increasing the damping coefficient can suppress the self-excited vibration and reduce the dynamic contact resistance. The fractal contact resistance model considering wear is established based on the fractal parameters models. The validity of the model is verified by the wear tests.

The results have a great significance to study the electrical contact behavior of conductive slip ring.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-09-2023-0300/

In response to the problem of insufficient traction/braking adhesion force caused by the existence of the third-body medium on the rail surface, this study aims to analyze the utilization of wheel-rail adhesion coefficient under different medium conditions and propose relevant measures for reasonable and optimized utilization of adhesion to ensure the traction/braking performance and operation safety of trains.

Based on the PLS-160 wheel-rail adhesion simulation test rig, the study investigates the variation patterns of maximum utilized adhesion characteristics on the rail surface under different conditions of small creepage and large slip. Through statistical analysis of multiple sets of experimental data, the statistical distribution patterns of maximum utilized adhesion on the rail surface are obtained, and a method for analyzing wheel-rail adhesion redundancy based on normal distribution is proposed. The study analyzes the utilization of traction/braking adhesion, as well as adhesion redundancy, for different medium under small creepage and large slip conditions. Based on these findings, relevant measures for the reasonable and optimized utilization of adhesion are derived.

When the third-body medium exists on the rail surface, the train should adopt the low-level service braking to avoid the braking skidding by extending the braking distance. Compared with the current adhesion control strategy of small creepage, adopting appropriate strategies to control the train’s adhesion coefficient near the second peak point of the adhesion coefficient-slip ratio curve in large slip can effectively improve the traction/braking adhesion redundancy and the upper limit of adhesion utilization, thereby ensuring the traction/braking performance and operation safety of the train.

Most existing studies focus on the wheel-rail adhesion coefficient values and variation patterns under different medium conditions, without considering whether the rail surface with different medium can provide sufficient traction/braking utilized adhesion coefficient for the train. Therefore, there is a risk of traction overspeeding/braking skidding. This study analyzes whether the rail surface with different medium can provide sufficient traction/braking utilized adhesion coefficient for the train and whether there is redundancy. Based on these findings, relevant measures for the reasonable and optimized utilization of adhesion are derived to further ensure operation safety of the train.

The combination of an Engineered Cementitious Composite (ECC) layer and steel plate to reinforce RC beams (ESRB) is a new strengthening method. The ESRB was proposed based on the steel plate at the bottom of RC beams, aiming to solve the problem of over-reinforced RC beams and improve the bearing capacity of RC beams without affecting their ductility.

In this paper, the finite element model of ESRB was established by ABAQUS. The results were compared with the experimental results of ESRB in previous studies and the reliability of the finite element model was verified. On this basis, parameters such as the width of the steel plate, thickness of the ECC layer, damage degree of the original beam and cross-sectional area of longitudinal tensile rebar were analyzed by the verified finite element model. Based on the load–deflection curve of ESRB, ESRB was discussed in terms of ultimate bearing capacity and ductility.

The results demonstrate that when the width of the steel plate increases, the ultimate load of ESRB increases to 133.22 kN by 11.58% as well as the ductility index increases to 2.39. With the increase of the damage degree of the original beam, the ultimate load of ESRB decreases by 23.7%–91.09 kN and the ductility index decreases to 1.90. With the enhancement of the cross-sectional area of longitudinal tensile rebar, the ultimate bearing capacity of ESRB increases to 126.75 kN by 6.2% and the ductility index elevates to 2.30. Finally, a calculation model for predicting the flexural capacity of ESRB is proposed. The calculated results of the model are in line with the experimental results.

Based on the comparative analysis of the test results and numerical simulation results of 11 test beams, this investigation verified the accuracy and reliability of the finite element simulation from the aspects of load–deflection curve, characteristic load and failure mode. Furthermore, based on load–deflection curve, the effects of steel plate width, ECC layer thickness, damage degree of the original beam and cross-sectional area of longitudinal tensile rebar on the ultimate bearing capacity and ductility of ESRB were discussed. Finally, a simplified method was put forward to further verify the effectiveness of ESRB through analytical calculation.

This paper aims to design an active shock absorber scheme for use in conjunction with a passive shock absorber to suppress the horizontal vibration of elevator cars in a smaller range and shorter time. The developed active shock absorber will also improve the safety and comfort of passengers driving in ultra-high-speed elevators.

A six-degree of freedom dynamic model is established according to the position and condition of the car. Then the active shock absorber and disturbance compensation-based adaptive control scheme are designed and simulated in MATLAB/Simulink. The results are analysed and compared with the traditional shock absorber.

The results show that, compared with traditional spring-based passive damping systems, the designed active shock absorber can reduce vibration displacement by 60%, peak acceleration by 50% and oscillation time by 2/3 and is more robust to different spring stiffness, damping coefficient and load.

The developed active shock absorber and its control algorithm can significantly reduce vibration amplitude and converged time. It can also adjust the damping strength according to the actual load of the elevator car, which is more suitable for high-speed elevators.

This paper aims to propose a method of the safety boundary protection for unmanned aerial vehicles (UAVs) in the icing conditions.

Forty icing conditions were sampled in the continuous maximum icing conditions in the Appendix C of the Federal Aviation Regulation Part 25. Icing numerical simulations were carried out for the 40 samples and the anti-icing thermal load distribution in full evaporation mode were obtained. Based on the obtained anti-icing thermal load distribution, the surrogated model of the anti-icing thermal load distribution was established with proper orthogonal decomposition and Kriging interpolation. The weather research and forecasting (WRF) model was used for meteorological simulations to obtain the icing meteorological conditions in the target area. With the obtained icing conditions and surrogated model, the anti-icing thermal load distribution in the target area and the variation with time can be determined. According to the energy supply of the UAVs, the graded safety boundaries can be obtained.

The surrogated model can predict the effects of five factors, such as temperature, velocity, pressure, median volume diameter (MVD) and liquid water content (LWC), on the anti-icing thermal load quickly and accurately. The simulated results of the WRF mode agree well with the observed results. The method can obtain the graded safety boundaries.

The method has a reference significant for the safety of the UAVs with the limited energy supply in the icing conditions.