Search results

Discusses the difficulties of measuring, defining and managing capacity; and develops a model which splits it into two components (resource and ability) plus several sub‐components, and recognizes the interfaces between them. Illustrates and defines the sub‐components and identifies three states of capacity loading: resource‐loaded (over‐resourced), ability‐loaded (e.g. over‐qualified staff) and even‐capacity (i.e. resources compatible with ability). Asserts that the relative capacities of firms within an industry form a “capacity curve” with ability‐loaded small firms, medium firms at even capacity and large firms resource‐loaded. Analyses 1994‐1997 data for the US electronics and electrical equipment industry to plot its capacity curve, explains the methodology used, and shows how the regression model can be applied to individual firms within the industry to improve capacity management. Recognizes the limitations of the study.

Rotational speed and load-carrying capacity are two mutual coupling factors which affect high precision and stable operation of a hydrostatic thrust bearing. The purpose of this paper is to study reasonable matching relationship between the rotational speed and the load-carrying capacity.

A mathematical model of relationship between the rotational speed and the load-carrying capacity of the hydrostatic bearing with double-rectangle recess is set up on the basis of the tribology theory and the lubrication theory, and the load and rotational speed characteristics of an oil film temperature field and a pressure field in the hydrostatic bearing are analyzed, reasonable matching relationship between the rotational speed and the load-carrying capacity is deduced and a verification experiment is conducted.

By increasing the rotational speed, the oil film temperature increases, the average pressure decreases and the load-carrying capacity decreases. By increasing the load-carrying capacity, the oil film temperature and the average pressure increases and the rotational speed decreases; corresponding certain reasonable matching values are available.

The load-carrying capacity can be increased and the rotational speed improved by means of reducing the friction area of the oil recess by using low-viscosity lubricating oil and adding more oil film clearance; but, the stiffness of the hydrostatic bearing decreases.

The loading mechanism of textures considering turbulence has not been fully covered. This paper aims to investigate the effect of turbulence on the textured loading capacity under water lubrication and to analyze the causes of the turbulence effect.

Computational fluid dynamic models with different textured shapes are established after validation. The transition shear stress transport (SST) model, which is suitable for predicting the transition process of fluid from laminar state to turbulent state, is adopted in the present study. To illustrate the effect of turbulence, the loading capacity of textures predicted by transition SST model and laminar model is compared.

The loading capacity is higher after considering turbulence because more lubricant enters into textures and the flow rate of lubricant to textured outlet increases. There exists an optimal textured depth ratio and density for loading capacity and the change of flow state would not affect the optimal values. The degree of fluid blockage at textured outlet has a dominant influence on loading capacity. As the textured shape changes to triangle or ellipse from rectangle, the vortices at the textured bottom move forward and the blockage at a textured outlet is enhanced, which makes loading capacity improved under the action of blocking effect.

The enhancement of the blocking effect is found to be crucial to the improvement of textured loading capacity after considering turbulence. Present research provides references to understand the loading mechanism of textures under turbulent conditions.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-04-2020-0149/

The purpose of this paper is to study the load capacity of nanoparticles-laden gas film (NLGF) in thrust bearing.

SiO₂ nanoparticles were added into gas to form an NLGF. The nanoparticles volume fraction in the film was controlled by a vibrator. The film thickness and the film pressure were measured by a micro cantilever displacement sensor and a membrane pressure sensor, respectively. The total load that makes the film thickness keeping constant was quantified, and then, the film load capacity was obtained.

The investigation shows that nanoparticles can enlarge the film load capacity remarkably; even a little amount of nanoparticles (0.01 per cent) could lead to a sharp rise. With the increase of nanoparticles volume fraction, load capacity increases. However, the increment of load capacity decreases gradually. In addition, the film pressure variation proves the enhancement effect of nanoparticles on the film load capacity.

The paper is restricted to the findings based on NLGF, which is formed by dispersing SiO₂ nanoparticles in gas film as an additive. The experimental results are applicable within the range of nanoparticles volume fraction of 0.01-0.33 per cent.

The fact that nanoparticles could enlarge the gas film load capacity is verified by experiment for the first time. This study reveals the corresponding relation between nanoparticles volume fraction and the film load capacity.

The purpose of this paper is to improve hydrodynamic load-carrying capacity of a water-lubricated journal bearing by a new bush structure. Water-lubricated bearing is becoming more and more popular since it is environmentally friendly and saves energy. However, contrary to oil and grease-lubricated bearings, water-lubricated bearing is limited in many situations due to its low hydrodynamic load-carrying capacity.

The present article proposes a new bearing bush, with a transition-arc structure, which is favorable for increasing hydrodynamic load-carrying capacity. Hydrodynamic load-carrying capacity was calculated by means of three-dimensional computational fluid dynamics (3-D CFD) analysis. Several variants of a journal bearing with a transition-arc structure of different dimensions are analyzed, while the radial clearance of the bearing, eccentricity ratio and the velocity of the journal remain unchanged.

The results show that obvious changes are found in hydrodynamic load-carrying capacity of a water-lubricated journal bearing. For different width over diameter (L/D) bearing ratios, the relationship between hydrodynamic load-carrying capacity and the magnitude of the transition-arc structure dimension is researched.

The research presented here leads to a design reference guideline that could be used by the designer engineer to design smart journal bearings for improving the hydrodynamic load-carrying capacity.

The purpose of this paper is to study the influence of structural parameters of oil groove (such as central angle number, depth and so on) on pressure, flow, load capacity and transmitted torque between friction pairs of hydro-viscous clutch.

According to the working process of friction pairs of hydro-viscous clutch, mathematical models of hydrodynamic load capacity and torque transmitted by the oil film were built based on viscosity-temperature property. Then analytical solutions of pressure, flow, load capacity and transmitted torque were obtained; effects of central angle of oil groove zone and friction contact zone, oil film thickness, number of oil grooves on pressure, flow, load capacity and torque were studied theoretically.

The research found that the central angle of oil groove zone, number of oil grooves and oil groove depth have similar effects on flow, which means that with the increase of central angle, number or depth of oil grooves, the flow also increases; pressure in friction contact zone and oil groove zone drops along radial direction, whereas its value in oil groove zone is higher. With the increase of the central angle of oil groove zone, pressure in friction contact zone and friction contact zone rises, and the load capacity increases, whereas the transmitted torque drops. Number of oil grooves has little effect on load capacity. When the oil film thickness increases, its flow increases accordingly, whereas the pressure, load capacity and transmitted torque drops. Meanwhile, the transmitted torque decreases with the increase of number of oil grooves, whereas the oil groove depth nearly has no effects on transmitted torque.

In this paper, mathematical models of hydrodynamic load capacity and torque transmitted by oil film were built based on viscosity-temperature property in the working process of hydro-viscous clutch, and their analytical solutions were obtained; effects of structural parameters of oil groove on transmission characteristics of hydro-viscous clutch based on viscosity-temperature property were revealed. The research results are of great value to the theory development of hydro-viscous drive technology, the design of high-power hydro-viscous clutch and relative control strategy.

The purpose of this paper is to discuss the calculation problem of the real carrying capacity of slewing bearings. The selection of slewing bearing to heavy-duty machine according to catalogue carrying capacity and also according to locally determined real carrying capacity is insufficient and it can be the cause of the damage of machine during exploitation.

The concepts of the local, total and general capacities is defined. The general capacity is a logical product of the local capacities. It is particularly useful in an analysis of slewing bearings incorporated into machines with complex structures. The FEM is applied in computations. The formation method of the mathematical model of a bearing is presented.

The computations of the local capacities and general capacity of a bearing for the limiting load of the bearing traces and the limiting tension of the bolts fastening the bearing were carried out. Considerations were illustrated by an example of the bearing of a mobile crane.

The paper presented in the methodology of the calculation of general bearing carrying capacity and the obtained results of calculations can be used already by designers of bearings and machine engines to elimination of the potential damages of machine on the stage of projecting.

The general capacity of a bearing into machines with complex and irregulars structure is considerably lower than the bearing catalogue capacity and then the local teal capacity. The reasons for the differences between the catalogue capacity and the general capacity of slewing bearings were given.

This review paper seeks to enhance knowledge of how pre-loading affects reinforced concrete (RC) beams under fire. It investigates key factors like deflection and load capacity to understand pre-loading's role in replicating RC beams' actual responses to fire, aiming to improve fire testing protocols and structural fire engineering design.

This review systematically aggregates data from existing literature on the fire response of RC beams, comparing scenarios with (WP) and without pre-loading (WOP). Through statistical tools like the two-tailed t-test and Mann–Whitney U-test, it assesses deflection extremes. The study further examines structural responses, including flexural and shear behavior, ultimate load capacity, post-yield behavior, stiffness degradation and failure modes. The approach concludes with a statistical forecast of ideal pre-load levels to elevate experimental precision and enhance fire safety standards.

The review concludes that pre-loading profoundly affects the fire response of RC beams, suggesting a 35%–65% structural capacity range for realistic simulations. The review also recommended the initial crack load as an alternative metric for determining the pre-loading impact. Crucially, it highlights that pre-loading not only influences the fire response but also significantly alters the overall structural behavior of the RC beams.

The review advances structural fire engineering with an in-depth analysis of pre-loading's impact on RC beams during fire exposure, establishing a validated pre-load range through thorough statistical analysis and examination of previous research. It refines experimental methodologies and structural design accuracy, ultimately bolstering fire safety protocols.

Steel-reinforced concrete-filled steel tubular (SRCFST) columns have been increasingly popular in engineering practice for the columns' excellent seismic and fire performance. Significant design progress guidance has been made through continuous numerical and experimental research in recent years. This paper tested and analysed the residual loading capacity of SRCFST columns under axial loading after experiencing non-uniform ISO-834 standard fire.

The experimental research covered the main parameter of heating conditions, 1-side and 2-side fire, through two specimens. Two specimens were heated and loaded simultaneously in the furnace for 240 min. After cooling, the columns were moved to the hydraulic loading system and loaded to failure to determine the columns' residual capacity.

The experimental results indicated that the non-uniform heating area plays an essential role in the overall performance of SRCFST columns, the increasing heating area of columns results in lower residual loading capacity and stiffness. The SRCFST columns still had a high loading capacity after heating and loading in the fire.

The comparison of experimental data against design results showed that the design method generated a 16% safety margin for S2H4 and a 39% safety margin for S1H4.