Search results

Distribution network design involves a set of strategic decisions in supply chains because of their long-term impacts on the total logistics cost and environment. To incorporate a trade-off between financial and environmental aspects of these decisions, this paper aims to determine an optimal location, among candidate locations, of a new logistics center, its capacity, as well as optimal network flows for an existing distribution network, while concurrently minimizing the total logistics cost and gas emission. In addition, uncertainty in transportation and warehousing costs are considered.

The problem is formulated as a fuzzy multiobjective mathematical model. The effectiveness of this model is demonstrated using an industrial case study. The problem instance is a four-echelon distribution network with 22 products and a planning horizon of 20 periods. The model is solved by using the min–max and augmented ε-constraint methods with CPLEX as the solver. In addition to illustrating model’s applicability, the effect of choosing a new warehouse in the model is investigated through a scenario analysis.

For the applicability of the model, the results indicate that the augmented ε-constraint approach provides a set of Pareto solutions, which represents the ideal trade-off between the total logistics cost and gas emission. Through a case study problem instance, the augmented ε-constraint approach is recommended for similar network design problems. From a scenario analysis, when the operational cost of the new warehouse is within a specific fraction of the warehousing cost of third-party warehouses, the solution with the new warehouse outperforms that without the new warehouse with respective to financial and environmental objectives.

The proposed model is an effective decision support tool for management, who would like to assess the impact of network planning decisions on the performance of their supply chains with respect to both financial and environmental aspects under uncertainty.

Pre-positioning and distributing relief items are important parts of disaster management as it simultaneously considers activities from both pre- and post-disaster stages. This study aims to address this problem with a novel mathematical model.

In this research, a bi-objective mixed-integer linear programming model is developed to tackle pre-positioning and distributing relief items, and it is formulated as an integrated location-allocation-routing problem with uncertain parameters. The humanitarian supply chain consists of relief facilities (RFs) and demand points (DPs). Perishable and imperishable relief commodities (RCs), different types of vehicles, different transportation modes, a time window for delivering perishable commodities and the occurrence of unmet demand are considered. A scenario-based game theory is applied for purchasing RCs from different suppliers and an integrated best-worst method-technique for order of preference by similarity to ideal solution technique is implemented to determine the importance of DPs. The proposed model is used to solve several random test problems for verification, and to validate the model, Iran’s flood in 2019 is investigated as a case study for which useful managerial insights are provided.

Managers can effectively adjust their preferences towards response time and total cost of the network and use sensitivity analysis results in their decisions.

The model locates RFs, allocates DPs to RFs in the pre-disaster stage, and determines the routing of RCs from RFs to DPs in the post-disaster stage with respect to minimizing total costs and response time of the humanitarian logistics network.

Forecasting population movement trends is crucial for implementing effective policies to regulate labor force growth and understand demographic changes. Combining migration theory expertise and neural network technology can bring a fresh perspective to international migration forecasting research.

This study proposes a conditional generative adversarial neural network model incorporating the migration knowledge – conditional generative adversarial network (MK-CGAN). By using the migration knowledge to design the parameters, MK-CGAN can effectively address the limited data problem, thereby enhancing the accuracy of migration forecasts.

The model was tested by forecasting migration flows between different countries and had good generalizability and validity. The results are robust as the proposed solutions can achieve lesser mean absolute error, mean squared error, root mean square error, mean absolute percentage error and R² values, reaching 0.9855 compared to long short-term memory (LSTM), gated recurrent unit, generative adversarial network (GAN) and the traditional gravity model.

This study is significant because it demonstrates a highly effective technique for predicting international migration using conditional GANs. By incorporating migration knowledge into our models, we can achieve prediction accuracy, gaining valuable insights into the differences between various model characteristics. We used SHapley Additive exPlanations to enhance our understanding of these differences and provide clear and concise explanations for our model predictions. The results demonstrated the theoretical significance and practical value of the MK-CGAN model in predicting international migration.

The variance between the winning bid and the owner's estimated cost (OEC) is one of the construction management risks in the pre-tendering phase. The study aims to enhance the quality of the owner's estimation for predicting precisely the contract cost at the pre-tendering phase and avoiding future issues that arise through the construction phase.

This paper integrated artificial neural networks (ANN), deep neural networks (DNN) and time series (TS) techniques to estimate the ratio of a low bid to the OEC (R) for different size contracts and three types of contracts (building, electric and mechanic) accurately based on 94 contracts from King Saud University. The ANN and DNN models were evaluated using mean absolute percentage error (MAPE), mean sum square error (MSSE) and root mean sums square error (RMSSE).

The main finding is that the ANN provides high accuracy with MAPE, MSSE and RMSSE a 2.94%, 0.0015 and 0.039, respectively. The DNN's precision was high, with an RMSSE of 0.15 on average.

The owner and consultant are expected to use the study's findings to create more accuracy of the owner's estimate and decrease the difference between the owner's estimate and the lowest submitted offer for better decision-making.

This study fills the knowledge gap by developing an ANN model to handle missing TS data and forecasting the difference between a low bid and an OEC at the pre-tendering phase.

The purpose of this study is to investigate whether and how inter-firm cooperation and firm age moderate the relationship between family ownership and productivity.

We first estimate the total factor productivity (TFP) of a large sample of Italian firms observed over the period 2010–2018 and then apply a Poisson random effects model.

TFP is, on average, higher for non-family firms (non-FFs) than for FF. Furthermore, inter-organizational cooperation and firm age mitigate the negative effect of family ownership. In detail, it is found that belonging to a network acts as a moderator in different ways according to firm age. Indeed, young FFs underperform non-FF peers, although the TFP gap decreases with age. In contrast, the benefits of a formal network are high for older FFs, suggesting that an age-related learning process is at work.

The study provides evidence that FFs can outperform non-FFs when they move away from Socio-Emotional Wealth-centered reference points and exploit knowledge flows arising from high levels of social capital. In the case of mature FFs, networking is a driver of TFP, allowing them to acquire external resources. Since FFs often do not have sufficient in-house knowledge and resources, they must be aware of the value of business cooperation. While preserving the familiar identity of small companies, networks grant FFs the competitive and scale advantages of being large.

Despite the wide but ambiguous body of research on the performance gap between FFs and non-FFs, little is known about the role of FFs’ heterogeneity. This study has proven successful in detecting age as a factor in heterogeneity, specifically to explain the network effect on the link between ownership and TFP. Based on a representative sample, the study provides a solid framework for FFs, policymakers and academic research on family-owned companies.

Gamification design is considered an effective way of changing users' health behavior and improving their health management performance. Even though numerous studies have investigated the positive effect of gamification competition on users, little research has considered gamification's ineffectiveness and negative effects. In particular, how gamification competition affects users' technological exhaustion remains unclear.

According to flow theory and related research on gamification, this study discusses the nonlinear relationship between gamification competition and users' technological exhaustion. Furthermore, the authors analyze the moderating effect of user type (socializers and achievers) and users' health condition on this nonlinear relationship. Based on flow theory, the authors propose a series of research hypotheses. To test all research hypotheses, the authors collected information from 407 users via a questionnaire as the data for this study.

The empirical results found a U-shaped relationship between gamification competition and technological exhaustion. Technological exhaustion gradually decreases as competition increases until reaching the lowest point; after that, technological exhaustion gradually increases as competition increases. Further, being a socializer and health condition play a moderating role in the U-shaped relationship between competition and technological exhaustion.

This study's findings not only enrich the related research in flow theory and gamification, but also contribute to the effective design of gamification in health management platforms.

Nearly 75% of EU buildings are not energy-efficient enough to meet the international climate goals, which triggers the need to develop sustainable construction techniques with high degree of resilience against climate change. In this context, a promising construction technique is represented by ventilated façades (VFs). This paper aims to propose three different VFs and the authors define a novel machine learning-based approach to evaluate and predict their energy performance under different boundary conditions, without the need for expensive on-site experimentations

The approach is based on the use of machine learning algorithms for the evaluation of different VF configurations and allows for the prediction of the temperatures in the cavities and of the heat fluxes. The authors trained different regression algorithms and obtained low prediction errors, in particular for temperatures. The authors used such models to simulate the thermo-physical behavior of the VFs and determined the most energy-efficient design variant.

The authors found that regression trees allow for an accurate simulation of the thermal behavior of VFs. The authors also studied feature weights to determine the most relevant thermo-physical parameters. Finally, the authors determined the best design variant and the optimal air velocity in the cavity.

This study is unique in four main aspects: the thermo-dynamic analysis is performed under different thermal masses, positions of the cavity and geometries; the VFs are mated with a controlled ventilation system, used to parameterize the thermodynamic behavior under stepwise variations of the air inflow; temperatures and heat fluxes are predicted through machine learning models; the best configuration is determined through simulations, with no onerous in situ experimentations needed.

The research aims to investigate the impact of thermo-mechanical aging on SBR under cyclic-loading. By conducting experimental analyses and developing a 3D finite element analysis (FEA) model, it seeks to understand chemical and physical changes during aging processes. This research provides insights into nonlinear mechanical behavior, stress softening and microstructural alterations in SBR compounds, improving material performance and guiding future strategies.

This study combines experimental analyses, including cyclic tensile loading, attenuated total reflection (ATR), spectroscopy and energy-dispersive X-ray spectroscopy (EDS) line scans, to investigate the effects of thermo-mechanical aging (TMA) on carbon-black (CB) reinforced styrene-butadiene rubber (SBR). It employs a 3D FEA model using the Abaqus/Implicit code to comprehend the nonlinear behavior and stress softening response, offering a holistic understanding of aging processes and mechanical behavior under cyclic-loading.

This study reveals significant insights into SBR behavior during thermo-mechanical aging. Findings include surface roughness variations, chemical alterations and microstructural changes. Notably, a partial recovery of stiffness was observed as a function of CB volume fraction. The developed 3D FEA model accurately depicts nonlinear behavior, stress softening and strain fields around CB particles in unstressed states, predicting hysteresis and energy dissipation in aged SBRs.

This research offers novel insights by comprehensively investigating the impact of thermo-mechanical aging on CB-reinforced-SBR. The fusion of experimental techniques with FEA simulations reveals time-dependent mechanical behavior and microstructural changes in SBR materials. The model serves as a valuable tool for predicting material responses under various conditions, advancing the design and engineering of SBR-based products across industries.

The circular economy (CE) promotes the recovery of value from waste while also working towards achieving long-term environmentally sustainable goals. The goal of this research is to explore the challenges, opportunities, future scope and green practices that small and medium-sized firms (SMEs) face as they move from the linear economy to the CE.

Based on a structured questionnaire, a survey was conducted with representatives from 163 SMEs in India. The data were analysed using co-variance based structural equation modelling technique.

This research identifies various challenges, including consumer acceptability, worries about awareness, recyclability issues, financial constraints and the absence of a defined management plan for SMEs in adopting the CE. Further, strong management will, innovation, technical up-gradation, training of employees, employee motivation and appropriate guidelines are recognized as essential possibilities for CE implementation.

While there has been some work on CE, no studies have directly compared these efforts with the goal of shifting from a linear economy to a CE. Given the transient nature of many archives, it is critical that the efforts put into them and the opinions of those who work in them be recorded so that communities can benefit from a shared linear economy in making decisions about their own history.

Building information modeling (BIM) is a striking development in the architecture, engineering and construction (AEC) industry, which provides in-depth information on different stages of the building lifecycle. Real estate valuation, as a fully interconnected field with the AEC industry, can benefit from 3D technical achievements in BIM technologies. Some studies have attempted to use BIM for real estate valuation procedures. However, there is still a limited understanding of appropriate mechanisms to utilize BIM for valuation purposes and the consequent impact that BIM can have on decreasing the existing uncertainties in the valuation methods. Therefore, the paper aims to analyze the literature on BIM for real estate valuation practices.

This paper presents a systematic review to analyze existing utilizations of BIM for real estate valuation practices, discovers the challenges, limitations and gaps of the current applications and presents potential domains for future investigations. Research was conducted on the Web of Science, Scopus and Google Scholar databases to find relevant references that could contribute to the study. A total of 52 publications including journal papers, conference papers and proceedings, book chapters and PhD and master's theses were identified and thoroughly reviewed. There was no limitation on the starting date of research, but the end date was May 2022.

Four domains of application have been identified: (1) developing machine learning-based valuation models using the variables that could directly be captured through BIM and industry foundation classes (IFC) data instances of building objects and their attributes; (2) evaluating the capacity of 3D factors extractable from BIM and 3D GIS in increasing the accuracy of existing valuation models; (3) employing BIM for accurate estimation of components of cost approach-based valuation practices; and (4) extraction of useful visual features for real estate valuation from BIM representations instead of 2D images through deep learning and computer vision.

This paper contributes to research efforts on utilization of 3D modeling in real estate valuation practices. In this regard, this paper presents a broad overview of the current applications of BIM for valuation procedures and provides potential ways forward for future investigations.