Search results

This paper aims to examine the impacts of corporate entrepreneurship, national policies and supply chain collaboration on the innovativeness of manufacturers of light emitting diode (LED) in Malaysia.

The data were collected by using questionnaire survey from the manufacturers involved in the various echelon of the supply chain. The data collected were analyzed by using partial least square (PLS).

Corporate entrepreneurship plays a moderating role in the relationship between national policies, supply chain collaboration and innovativeness.

This study is only focusing on the supply chain of LED in Malaysia; hence, the results may not be suitable to be generalized to wider populations.

The findings of this study could help the local companies to understand on how, as entrepreneurs, they could expand from small scale to contract manufacturers through enhancing innovativeness. This is important as failure to do so may cause them to be excluded from the global supply chain.

This study expands the existing literature by providing empirical evidence from the perspective of an emerging country, namely, Malaysia. It also attempts to close the gaps by examining the role of corporate entrepreneurship as the moderating variable.

This paper aims to investigate voiding phenomena in solder joints under thermal pads of light-emitting diodes (LEDs) assembled in mass production environment by reflow soldering by using seven low-voiding lead-free solder pastes.

The solder pastes investigated are of SAC305 type, Innolot type or they are especially formulated by the manufacturers on the base of (SnAgCu) alloys with addition of some alloying elements such as Bi, In, Sb and Ti to provide low-void contents. The SnPb solder paste – OM5100 – was used as a benchmark. The solder paste coverage of LED solder pads was chosen as a measure of void contents in solder joints because of common usage of this parameter in industry practice.

It was found that the highest coverage and, related to it, the least void contents are in solder joints formed with the pastes LMPA-Q and REL61, which are characterized by the coverage of mean value 93.13% [standard deviation (SD) = 2.72%] and 92.93% (SD = 2.77%), respectively. The void diameters reach the mean value equal to 0.061 mm (SD = 0.044 mm) for LMPA-Q and 0.074 mm (SD = 0.052 mm) for REL61. The results are presented in the form of histograms, plot boxes and X-ray images. Some selected solder joints were observed with 3D computer tomography.

The statistical analyses are carried out on the basis of 2D X-ray images with using Origin software. They enable to compare features of various solder pastes recommended by manufacturers as low voiding. The results might be useful for solder paste manufacturers or electronic manufacturing services.

The Gulf Cooperation Council (GCC) of countries has some of the highest electricity consumptions and carbon dioxide emissions per capita in the world. This poses a direct challenge to the GCC government’s ability to meet their CO₂ reduction targets. In this review paper the current household electricity consumption situation in the GCC is reviewed.

Three scenarios for reducing energy consumption and CO₂ emissions are proposed and evaluated using strengths, weaknesses, opportunities and threats (SWOT) as well as the political, economic, social, technical, legal and environmental (PESTLE) frameworks.

The first scenario found that using solar Photovoltaic (PV) or hybrid solar PV and wind system to power household lighting could save significant amounts of energy, based on lighting making up between 8% to 30% of electricity consumption in GCC households. The second scenario considers replacement of conventional appliances with energy-efficient ones that use around 20% less energy. The third scenario looks at influencing consumer behavior towards sustainable energy consumption.

Pilot trials of these scenarios are recommended for a number of households. Then the results and feedback could be used to launch the schemes GCC-wide.

The proposed scenarios are designed to encourage responsible electricity consumption and production within households (SDG12).

All three proposals are found viable for policymakers to implement. However, to ensure successful implementation GCC Governments are recommended to review all the opportunities and challenges associated with these schemes as laid out in this paper.

Architectural theorists have a long tradition of acknowledging the centrality of building users to architectural production. This article contributes to the discourse on architecture, actor–network theory (ANT), and users by proposing a typology of user translations ranging from supporting to tinkering to adjusting to resisting.

The research utilises an ANT-inspired ethnography of sustainable lighting scripts at the Masdar Institute of Science and Technology (MIST). It comprises semi-structured interviews with MIST designers and students, and site visits and participant observation to understand how the users interpret the scripts and how they interact and change them on a daily basis.

There is a shared understanding that users do not simply receive architectural designs but interpret and change them to suit their preferences. The findings reveal the multiple ways that users interpret and respond to the assumptions of designers and in the process, recast the relations between themselves and their material surroundings.

The research contributes to acknowledging the centrality of users to architectural design processes and the interpretation of design scripts, addressing the limitation in current literature in demonstrating the diversity of ways that users react to such scripts. The research suggests that user actions have significant implications on long-term building performance. It accordingly points to the need for devising multiple means of user involvement in the design process and allowing greater flexibility in design scripts to improve the alignment with user preferences.

The purpose of this paper is to analyze the individual steps during the printing of capacitor structures. The method of substrate preparation, the obtained roughness of conductive and dielectric layers are examined. Moreover, the capacitances of the obtained capacitors were examined.

Surface roughness and microscopic analysis were used to assess the quality of printed conductive structures. Two criteria were used to assess the quality of printed dielectric structures: the necessary lack of discontinuity of layers and minimal roughness. To determine the importance of printing parameters, a draft experimental method was proposed.

The optimal way to clean the substrate has been determined. The most important parameters for the dielectric layer (i.e. drop-space, table temperature, curing time and temperature) were found.

If dielectric layers are printed correctly, most problems with printing complex electronic structures (transistors, capacitors) will be eliminated.

The tests performed identified the most important factors for dielectric layers. Using them, capacitors of repeatable capacity were printed.

In the literature on this subject, no factors were found which were responsible for obtaining homogeneous dielectric layers.

The purpose of this research project was to improve public awareness to improve public awareness of the importance of energy conservation and to improve the use of simple conservation strategies. A thorough evaluation of the net gain from the numerous energy campaigns rolled out to the public every year is lacking. This study conducted pre- and post-campaign surveys and focus groups to evaluate one campaign’s impact on self-reported energy behaviors.

The campaign used television public service announcements and a website to improve awareness of the city’s efforts to conserve energy and to increase individual energy conservation practices. Focus groups (n = 40) were used to identify common barriers to conservation, and pre- and post-surveys (n = 533, 479) were conducted to evaluate the campaign’s effectiveness.

Results indicated that the campaign increased positive changes in changing light bulbs and confidence in taking action to turn down thermostats, unplug devices and turn off lights. While follow-up research is needed on the precise mechanism of the psychological process at work, the findings are consistent with the concepts of self and response efficacy as needed components of any behavior change. The authors advocate the adoption of research-informed message design to maximize communication campaign effects.

This paper demonstrates how the combination of three prominent persuasion theories can be used to develop behavior change campaigns. Also, it is one of the few studies to evaluate the effectiveness of the Energy Star campaign.

The purpose of this study is to demonstrate the potential of three-dimensional printing technology for the remanufacturing of end-of-life (EoL) composites. This technology will enable the rapid fabrication of environmentally sustainable structures with complex shapes and good mechanical properties. These three-dimensional printed objects will have several application fields, such as street furniture and urban renewal, thus promoting a circular economy model.

For this purpose, a low-cost liquid deposition modeling technology was used to extrude photo-curable and thermally curable composite inks, composed of an acrylate-based resin loaded with different amounts of mechanically recycled glass fiber reinforced composites (GFRCs). Rheological properties of the extruded inks and their printability window and the conversion of cured composites after an ultraviolet light (UV) assisted extrusion were investigated. In addition, tensile properties of composites remanufactured by this UV-assisted technology were studied.

A printability window was found for the three-dimensional printable GFRCs inks. The formulation of the composite printable inks was optimized to obtain high quality printed objects with a high content of recycled GFRCs. Tensile tests also showed promising mechanical properties for printed GFRCs obtained with this approach.

The novelty of this paper consists in the remanufacturing of GFRCs by the three-dimensional printing technology to promote the implementation of a circular economy. This study shows the feasibility of this approach, using mechanically recycled EoL GFRCs, composed of a thermoset polymer matrix, which cannot be melted as in case of thermoplastic-based composites. Objects with complex shapes were three-dimensional printed and presented here as a proof-of-concept.

Effective rail surface defects detection method is the basic guarantee to manufacture high-quality rail. However, the existed visual inspection methods have disadvantages such as poor ability to locate the rail surface region and high sensitivity to uneven reflection. This study aims to propose a bionic rail surface defect detection method to obtain the high detection accuracy of rail surface defects under uneven reflection environments.

Through this bionic rail surface defect detection algorithm, the positioning and correction of the rail surface region can be computed from maximum run-length smearing (MRLS) and background difference. A saliency image can be generated to simulate the human visual system through some features including local grayscale, local contrast and edge corner effect. Finally, the meanshift algorithm and adaptive threshold are developed to cluster and segment the saliency image.

On the constructed rail defect data set, the bionic rail surface defect detection algorithm shows good recognition ability on the surface defects of the rail. Pixel- and defect-level index in the experimental results demonstrate that the detection algorithm is better than three advanced rail defect detection algorithms and five saliency models.

The bionic rail surface defect detection algorithm in the production process is proposed. Particularly, a method based on MRLS is introduced to extract the rail surface region and a multifeature saliency fusion model is presented to identify rail surface defects.

Solar cells could make textile-based wearable systems energy independent without the need for battery replacement or recharging; however, their laundry resistance, which is prerequisite for the product acceptance of e-textiles, has been rarely examined. This paper aims to report a systematic study of the laundry durability of solar cells embedded in textiles.

This research included small commercial monocrystalline silicon solar cells which were encapsulated with functional synthetic textile materials using an industrially relevant textile lamination process and found them to reliably endure laundry washing (ISO 6330:2012). The energy harvesting capability of eight textile laminated solar cells was measured after 10–50 cycles of laundry at 40 °C and compared with light transmittance spectroscopy and visual inspection.

Five of the eight textile solar cell samples fully maintained their efficiency over the 50 laundry cycles, whereas the other three showed a 20%–27% decrease. The cells did not cause any visual damage to the fabric. The result indicates that the textile encapsulated solar cell module provides sufficient protection for the solar cells against water, washing agents and mechanical stress to endure repetitive domestic laundry.

This study used rigid monocrystalline silicon solar cells. Flexible amorphous silicon cells were excluded because of low durability in preliminary tests. Other types of solar cells were not tested.

A review of literature reveals the tendency of researchers to avoid standardized textile washing resistance testing. This study removes the most critical obstacle of textile integrated solar energy harvesting, the washing resistance.

Nocturnal headaches among adolescents were reported to be increased with the development of modern technology. The purpose of this paper is to investigate the smartphone electromagnetic radiation related to nocturnal headaches among high school students.

The time series study of all 12,969 records from 145 high school students Chiang Mai Province was selected from the population in the first phase by setting criteria. The samples completed a headache diary utilizing a smartphone application. The smartphone output power (SOP) was measured and recorded by the smartphone application and transmitted by e-mail to a researcher. The smartphone use, sleep quality, anxiety and depression also were assessed. Data were analyzed using Generalized Estimating Equation adjusting for demographic data, smartphone use, and sleep quality and otherwise.

The resulted showed the prevalence of repeated headaches to be 13.4 percent, nocturnal headache only 5.3 percent and the strongest effect of day time SOP at a 1.80–1.99×10⁻⁵ mW range on nocturnal headaches (OR_adj5.18; 95% CI: 3.44–7.81). Meanwhile, Lag_6 of daily SOP exposure produced a nocturnal headache effect in a reverse dose-response manner. Furthermore, the nocturnal headache also had the strongest association with age, internet use and device brand (OR_adj2.33; 95% CI: 1.08–5.05, OR_adj2.14; 95% CI: 1.07–4.2 and OR_adj1.68; 95% CI: 1.1–2.4).

The electromagnetic radiation from a smartphone is the environmental variables influences on headache. The results suggested that there should be limited times for smartphone use and older age to start using a smartphone to prevent headache attacks at night.