Search results

This paper aims to propose a three-phase interpenetrating continua model for the numerical simulation of water waves and porous structure interaction.

In contrast with one-fluid formulation or multi-component methods, each phase has its own characteristics, density, velocity, etc., and each point is occupied by all phases. First, the porous structure is modelled as a phase of continua with a penalty force adding on the momentum equation, so the conservation of mass is guaranteed without source terms. Second, the adaptive unstructured mesh modelling with P1DG-P1 elements is used here to decrease the total number of degree of freedom maintaining the same order of accuracy.

Several benchmark problems are used to validate the model, which includes the Darcy flow, classical collapse of water column and water column with a porous structure. The interpenetrating continua model is a suitable approach for water wave and porous structure interaction problem.

The interpenetrating continua model is first applied for the water wave and porous structure interaction problem. First, the structure is modelled as phase of non-viscous fluid with penalty force, so the break of the porous structure, porosity changes can be easily embedded for further complex studies. Second, the mass conservation of fluids is automatically satisfied without special treatment. Finally, adaptive anisotropic mesh in space is employed to reduce the computational cost.

This study aims to analyze the tradeoff between two potential marketing strategies for service providers, namely, market segmentation on the basis of reservation lead time and cooperation with third parties.

This paper proposes an optimization model to describe market segmentation strategy after cooperating with third parties by taking hotels for example.

The results show that the profitability of adopting two strategies simultaneously is lower than that with market segmentation alone under some cases, which is relevant with attributes of travel agencies, such as switch rate and market share.

This study indicates that cooperation with third parties has a negative impact on profitability of hotels using market segmentation in some cases. However, randomness of demand, customer loyalty and existence of cancellation should be considered in further research.

In an e-commerce era, hotels with market segmentation based on reservation lead time, are not required to cooperate with third parties under a number of situations (e.g. high switch rates and small market sizes of travel agencies). In addition, hotels should revise the segmentation strategy based on the change rate of potential demand of individual customers. Furthermore, hotels should enhance customer loyalty, strengthen cooperation with travel agencies that possess large market shares or small switch rates.

The study preliminarily formulates the optimal market segmentation strategy on the basis of reservation lead time after cooperating with third parties, which contributes to the revenue management.

This chapter analyses the efficiency of African airlines using a two-stage network DEA (Data Envelopment Analysis) model. Network DEA models usually take into account the production process with intermediate inputs derived from the first stage and a second stage that departs from it. This fundamental feature enables one to view the airline production process as a carry-over activity. The analysis covers the 2010–2013 period. The relative efficiency ranks are presented and policy implications are derived.

The high-quality development of the real estate industry is crucial to the transformation of China's economy. However, few studies apply the productivity to explore the development path of the real estate industry in China. To fill this gap, this study mainly investigates the total factor productivity (TFP) of the real estate industry of 30 sample provinces in mainland China from 2007 to 2016.

The Malmquist index is applied to estimate the productivity (i.e. TFP) of the real estate industry, based on the data envelopment analysis (DEA). Then, the truncated tobit regression analysis explores the external influencing factors on the TFP of the real estate industry.

Through empirical analysis, it is found that the high-quality development of the real estate industry depends on the technological innovation by the real estate enterprises and the targeted policies by the provincial government. Moreover, the development of the real estate industry has a positive correlation with the growth of China's economy but a negative correlation with the development of other industries.

TFP mainly reveals the development status of the provincial real estate industry and identifies the driving force for exploring the high-quality development mode of the real estate sector. Furthermore, the fluctuation rule of TFP can be applied to predict the development trend of the real estate industry in the future.

As an application, this study measures the TFP of the Chinese real estate industry in different provinces and periods. The results have meaningful policy implications for policymakers regulating the real estate industry.

A theoretical and experimental study is performed to investigate unsteady, two‐dimensional, incompressible fluid flow over both sides of a slot‐perforated flat surface, which is placed in a two‐dimensional channel. The governing boundary‐layer equations are discretized by means of a finite‐difference technique to determine streamwise and transverse velocity components. The roles of both the Reynolds number and the ratio of the slot width, d, to the plate thickness, δ, on the velocity field are disclosed. It is found from the study that: (i) the flow pattern between two plates can be classified into four categories depending on a combination of Re and d/δ, (ii) at a small value of Re and/or d/δ, flow over the slot exhibits no timewise variation, (iii) when Re and d/δ exceed certain values, an alternate crossing of flow from one side of the plate to the other occurs across the slot, and (iv) a further increase in Re results in a complex flow both inside the slot and on the plate downstream of the slot. These results are confirmed by the flow visualization using ion‐exchange resins.

This study aims to optimise the effect of pre-oxidation on hot corrosion behaviour of Tribaloy T-900 at 900 °C in mixed Na₂SO₄ and K₂SO₄.

Prior to hot corrosion experiment, pre-oxidation treatments were carried in ambient air at 900 °C for 1, 5 and 10 h, respectively. The hot corrosion experiments were performed in a box type furnace at 900 °C. Both surfaces of specimens were brushed with saturated salt solution of 75 wt.% Na₂SO₄ + 25 wt.% K₂SO₄. After brushing, the salt-coated specimens were placed in electric stove to ensure drying of salt. After drying, presence of 3 mg/cm² salt on specimen’s surface was ensured through weighting.

The 1-h pre-oxidation treatment prior to hot corrosion showed superior hot corrosion resistance against molten salt attack. An optimum pre-oxidation time of 1 h helped timely formation of protective Cr₂O₃ layer and inhibited the formation of less stable and porous surface oxides of Ni and Mo during hot corrosion.

Pre-oxidation effect on hot corrosion behaviour of refractory metal (such as Mo in investigated alloy) containing alloy has never been reported previously. Refractory metals oxide (e.g. MoO3) could transform the corrosion phenomena to catastrophic failure through acidic fluxing.

Explains why, following China‘s implementation of a market economy, public accounting firms were required to affiliate (hook‐up) with existing government or educational institutions until 1993 when partnerships and limited liability firms were also allowed. Describes the rules relating to independent accounting firms and changes which should foster their development but reports that, in fact, most firms are still affiliated. Discusses the reasons for this and the resulting problems, e.g. lack of competition and independence, low quality of service and increases in fraud, misrepresentation and under‐disclosure. Reveals that despite the 1995 exposure draft on eliminating the hooking‐up structure few de‐affiliations have taken place and identifies four problems which need solving if full de‐affiliation is to be achieved.

There is significant amount of literature tackling different issues related to the port industry. The present chapter focuses on a single business unit of seaports aiming at the documentation of works related to container terminals.

An effort to review, collect and present the majority of the works present in the last 30 years, between 1980 and 2010, has been made in order to picture the problems dealt and methods used by the authors in the specific research field. To facilitate the reader, studies have been grouped under five categories of addressed problems (productivity and competitiveness, yard and equipment utilization, equipment scheduling, berth planning, loading/unloading) and four modelling methodologies (mathematics and operations research, management and economics, simulation, stochastic modelling).

The analysis shows that most works focus on productivity and competitiveness issues followed by yard and equipment utilisation and equipment scheduling. In reference to the methodologies used managerial and economic approaches lead, followed by mathematics and operations research.

In reference to future research, two fields have been identified where there is scope of significant contribution by the academic community: container terminal security and container terminal supply chain integration.

The present chapter provides the framework for researchers in the field of port container terminals to picture the so far works in this research area and enables the identification of gaps at both research question and methodology level for further research.

This paper aims to measure Chinese regional thermal industries’ evolution.

This paper uses data envelopment analysis (DEA) and global Malmquist–Luenberger productivity (GMLP) index.

The results reveal that the development of Chinese thermal power industry varies significantly in different regions, and it is highly correlated with the level of local economic development. Although the change of technical efficiency and scale efficiency had different impacts on different regions from year to year, the overall GMLP index change shows a close relationship with the contemporaneous frontier shift.

The results indicate that the Chinese Government should make efforts to promote its policy implementations and regulations in thermal industries so that the contemporaneous frontier will shift toward the global technology frontier with more desirable outputs and less undesirable outputs.

As an application, this study uses DEA and GMLP index to measure the productivity of Chinese thermal industries in 30 Chinese provinces from 2006 to 2013. The results have the meaningful policy implications for decision makers in charge of Chinese thermal industries.

The purpose of this paper is to examine the hotel growth model including hotel brand, culture and life cycle phases of the Myrtle Beach, South Carolina, the fastest growing tourism destination in the United States.

Culture reflecting consuming behaviour of low-context innovators and high-context imitators is measured by the price elasticity of demand (PED). Hotel brand reflecting guests’ hotel class is measured by the income elasticity of demand. Autoregressive distributed lag has been conducted on the Smith Travel Research data in 33 years (1989–2022) to determine the relationship among hotel brand, culture and life cycles.

Skilled labour is the key to make hotels grow. Therefore, increase room rates when hotels possess skilled professionals and decrease room rates when hotels have no skilled professionals. During the rejuvenation in Myrtle Beach (1999–2003), hoteliers increased room rates for innovators due to skilled professionals to increase revenue. Otherwise, a decrease in room rates due to lack of skilled professionals would lead to increase revenue.

(1) Although Myrtle Beach is one of the fastest growing tourism destinations in the US, it has a relatively small geographic area relative to the country. (2) Data cover over one tourist life cycle, so the time span is relatively short. Hoteliers can forecast the number of guests in different culture by changing room rates.

To optimize revenue, hoteliers can select skilled labour in professional design hotel brands which could make an increase in demand for leisure transient guests no matter what room rates increase after COVID-19 pandemic.

The study has considered the applied ethical processes regarding revenue management that would maximize both revenue and customer satisfaction when it set up an increase in room rates to compensate for professional hotel room design or it decreases room rates for low-income imitators in exploration and development.

This research highlights that (1) skilled design in the luxury hotel brand is the key for the hotel growth and (2) there is a steady state of the growth model in the destination life cycle.