Search results

Multilevel inverters (MLIs) have been studied widely over the past two decades because of their inherent advantages and interesting features. However, most of the newly introduced structures suffer from the increased standing voltage of the switches, which is defined as the maximum off-state voltage on the switches, losing modularity and increased number of direct current (DC) voltage sources. The purpose of this study is to propose a new hybrid MLI topology to alleviate the mentioned problems.

The proposed approach in this study includes using the advantage of two different topologies and combine them in a way that the advantages of both of the topologies are achieved. Therefore, the approach is to design a hybrid topology from two existing topologies so that a new topology has resulted.

This paper proposes a new hybrid MLI with lower power electronic switches and lowers DC voltage sources in comparison with the classic structures. The proposed MLIs maintain a balance between the number of switches, the standing voltage on the switches and the number of DC sources. The topology description, modulation method and comparative study have been presented. Also, another more reduced structure is presented for higher power factor operation. The MATLAB simulation and experimental results of a nine-level inverter have been presented to verify its operation.

The hybrid topology has a new structure that has not been presented before. It is important to emphasize that the topology combination and achieving the hybrid topology is wisely accomplished to improve some features of the MLI.

This chapter aims to consider workplace spirituality from a cross-cultural perspective. The terms workplace spirituality and culture are so intangible, and both start with the attitude and behavior of humans but are meaningful in a community. Because of the constraint of understanding these abstract settings, it is necessary to define and specify the dimensions of both concepts to achieve the aim of this chapter. In this regard, the section starts with the conceptuality of workplace spirituality and the dimensions of the term, which cumulate at individual, group, and organizational levels. It goes with the part of cultural dimensions in the light of Hofstede's (2001) direction, Chhokar, Brodbeck, and House's (2007) extension, and Sharma's (2010) derivation of cultural dimensions for national, organizational, and individual levels, respectively. After joining the dots, the chapter focuses on one of the most sacred research areas for academic literature, cross-cultural differences, and workplace spirituality. The last part of the chapter is the conclusion to point to final notes about the concepts and help guide future studies.

This study aims to evaluate the efficiency of various techniques for enhancing indoor air quality (IAQ) in construction. It analyzed the alterations in the concentration of indoor air pollutants over time for each product employed in controlling pollution sources and removing it, which included eco-friendly substances and adsorbents. The study will provide more precise and dependable data on the effectiveness of these control methods, ultimately supporting the creation of more efficient and sustainable approaches for managing indoor air pollution in buildings.

The research investigates the impact of eco-friendly materials and adsorbents on improving indoor air quality (IAQ) in Dubai's tall apartment buildings. Field experiments were conducted in six units of The Gate Tower, comparing the IAQ of three units built with “excellent” grade eco-friendly materials with three built with “good” grade materials. Another experiment evaluated two adsorbent products (H and Z) in the Majestic Tower over six months. Results indicate that “excellent” grade materials significantly reduced toluene emissions. Adsorbent product Z showed promising results in pollutant reduction, but there is concern about the long-term behavior of adsorbed chemicals. The study emphasizes further research on household pollutant management.

The research studied the effects of eco-friendly materials and adsorbents on indoor air quality in Dubai's new apartments. It found that apartments using “excellent” eco-friendly materials had significantly better air quality, particularly reduced toluene concentrations, compared to those using “good” materials. However, high formaldehyde (HCHO) emissions were observed from wood products. While certain construction materials led to increased ethylbenzene and xylene levels, adsorbent product Z showed promise in reducing pollutants. Yet, there is a potential concern about the long-term rerelease of these trapped chemicals. The study emphasizes the need for ongoing research in indoor pollutant management.

The research, while extensive, faced limitations in assessing the long-term behavior of adsorbed chemicals, particularly the potential for rereleasing trapped pollutants over time. Despite the study spanning a considerable period, indoor air pollutant concentrations in target households did not stabilize, making it challenging to determine definitive improvement effects and reduction rates among products. Comparisons were primarily relative between target units, and the rapid rise in pollutants during furniture introduction warrants further examination. Consequently, while the research provides essential insights, it underscores the need for more prolonged and comprehensive evaluations to fully understand the materials' and adsorbents' impacts on indoor air quality.

The research underscores the importance of choosing eco-friendly materials in new apartment constructions for better IAQ. Specifically, using “excellent” graded materials can significantly reduce harmful pollutants like toluene. However, the study also highlights that certain construction activities, such as introducing furniture, can rapidly elevate pollutant levels. Moreover, while adsorbents like product Z showed promise in reducing pollutants, there is potential for adsorbed chemicals to be rereleased over time. For practical implementation, prioritizing higher-grade eco-friendly materials and further investigation into furniture emissions and long-term behavior of adsorbents can lead to healthier indoor environments in newly built apartments.

The research offers a unique empirical assessment of eco-friendly materials' impact on indoor air quality within Dubai's rapidly constructed apartment buildings. Through field experiments, it directly compares different material grades, providing concrete data on pollutant levels in newly built environments. Additionally, it explores the efficacy of specific adsorbents, which is of high value to the construction and public health sectors. The findings shed light on how construction choices can influence indoor air pollution, offering valuable insights to builders, policymakers and residents aiming to promote public health and safety in urban living spaces.

The purpose of the study is to evaluate the severity of public events in real time from the perspective of social media and to construct the early warning mechanism of public events.

This study constructed the severity assessment system of public events from the dimensions of the netizens' role, the Internet media's role, the spread of public events and the attitudes and feelings of netizens. The method of analyzing the influence tendency of the public event severity indicators was proposed. A total of 1,107,308 microblogging entries regarding four public events were investigated. The severity of public events was divided into four levels.

It is found that serious public events have higher indicator values than medium level events on the microblogging platform. A quantitative severity classification standard for public events was established and the early warning mechanism of public events was built.

Microblogging and other social media platforms provide rich clues for the real-time study and judgment of public events. This study only investigated the Weibo platform as the data source. Other social media platforms can also be considered in future.

Different from the ex-post evaluation method of judging the severity of public events based on their physical loss, this study constructed a quantitative method to dynamically determine the severity of public events according to the clues reflected by social media. The results can help the emergency management departments judge the severity of public events objectively and reduce the subjective negligence and misjudgment.

The purpose of the study is distributed generation planning in a radial delivery framework to identify an appropriate location with a suitable rating of DG units energized by renewable energy resources to scale back the power loss and to recover the voltage levels. Though several algorithms have already been proposed through the target of power loss reduction and voltage stability enhancement, further optimization of the objectives is improved by using a combination of heuristic algorithms like DE and particle swarm optimization (PSO).

The identification of the candidate buses for the location of DG units and optimal rating of DG units is found by a combined differential evolution (DE) and PSO algorithm. In the combined strategy of DE and PSO, the key merits of both algorithms are combined. The DE algorithm prevents the individuals from getting trapped into the local optimum, thereby providing efficient global optimization. At the same time, PSO provides a fast convergence rate by providing the best particle among the entire iteration to obtain the best fitness value.

The proposed DE-PSO takes advantage of the global optimization of DE and the convergence rate of PSO. The different case studies of multiple DG types are carried out for the suggested procedure for the 33- and 69-bus radial delivery frameworks and a real 16-bus distribution substation in Tamil Nadu to show the effectiveness of the proposed methodology and distribution system performance. From the obtained results, there is a substantial decrease in the power loss and an improvement of voltage levels across all the buses of the system, thereby maintaining the distribution system within the framework of system operation and safety constraints.

A comparison of an equivalent system with the DE, PSO algorithm when used separately and other algorithms available in literature shows that the proposed method results in an improved performance in terms of the convergence rate and objective function values. Finally, an economic benefit analysis is performed if a photo-voltaic based DG unit is allocated in the considered test systems.

There are no existing tools to capture resources needed to support people with intellectual disability in an inpatient setting on an individual patient basis. The purpose of this paper is to describe the development of a new tool called Universal Needs Based Resource Assessment (UNBRA).

Using the Delphi method, focus groups were used to generate factors determining resource use. From these, themes were identified, a scoring system was created and the UNBRA tool was developed. This was piloted in two NHS inpatient units and modified following feedback.

The UNBRA tool holistically assesses resource requirements of an individual with intellectual disability supported in an inpatient setting. It considers ten factors grouped into the six themes of staffing, indirect work, clinical/ multi-disciplinary work, incidents, carer link activity and discharge process. UNBRA scores allow intra- and interpersonal comparison as well as comparison between units and can support resource allocation and operational decision-making.

To the best of the authors’ knowledge, there is no suitable existing tool to capture individual resource requirements of patients in intellectual inpatient settings. The development of the UNBRA tool fills this gap.

The digital economy is profoundly transforming the manufacturing industry's fundamental concepts and value creation logic, making digital transformation (DT) strategy a crucial decision for manufacturers. And faced with increasingly severe environmental issues, DT may become an important means to achieve sustainable development. This paper mainly discusses the strategic choice of the manufacturer's DT and analyzes the impact of DT on carbon emissions.

Based on the carbon cap-and-trade mechanism, the authors have constructed two decision models to study the DT strategy of the manufacturer, further exploring the impact of the mechanism on the DT strategy and production strategy of the manufacturer. Finally, the authors discussed the effect of manufacturers' DT on their carbon emissions.

The authors found that the manufacturer should initiate DT to enhance their competitiveness, regardless of whether they are in a low digital technology scenario or a high digital technology scenario. Notably, DT can enhance the ability of the manufacturer to respond to external emergencies. In a low digital technology market scenario, both carbon emissions per unit of product and carbon price are positively affecting the digitization level of the manufacturer. In a high digital technology market scenario, the manufacturer will initiate a full degree of DT. Moreover, the impact of DT on total carbon emissions varies in markets with different levels of digital technology.

Innovatively, the authors divided the DT of the manufacturer into market scenarios with low digital technology and high digital technology. Provide the manufacturer with DT decisions according to different scenarios. At the same time, it verifies the uncertainty of DT on carbon emission and enriches the related research.

Supply chains are among the most important, complex and risky systems in the modern world. Thus, managing risk is no longer an option, but a fundamental process in organizations. Given the lack of pathways that guide companies toward supply chain risk management (SCRM), the purpose of this study is to provide a conceptual reference, in the form of a maturity model, to support them in the evolution and improvement of this process.

The proposal covered a broad literature review, a survey and a multiple case study. The research was conducted in the aerospace industry and included companies from the supply chain of a leading aircraft manufacturer.

The model elaborated with the research results has eight attributes and four levels, addressing critical issues for SCRM to achieve its scope and purposes. The attributes include the structuring and scope of the SCRM process, the importance it receives within the organization, the resources used and the qualification of employees, the role of leadership and the inter-organizational collaboration.

Managing risk along supply chains is particularly challenging, demands resources and knowledge and requires a continuous effort. The proposed model offers a reference for improvement, helping to identify areas that need to be strengthened and practices to be implemented. Thus, it can guide the focus and efforts in a more efficient and systematic way, in addition to support evaluations and comparisons.

Although maturity models are abundant in different fields and several are available for risk management, models specifically developed for SCRM are scarce. This study broadens the understanding of SCRM with novel insights about how to improve this process in an evolutionary way. While many researchers focused their efforts on the SCRM process steps, this study identified critical issues that transcend these steps. The research was carried out in a sector with a long tradition in risk management and included companies belonging to a same supply chain, that is, using an approach still little explored in studies on SCRM or risk management maturity models.

This paper investigates how the channel leadership strategies develop a post-coronavirus disease (COVID-19) resilient agri-supply chain, which reduces supplier and retailer's price loss and enhances the logistics service quality level considering logistics outsourcing of agri-product especially for the rapidly changing market condition.

Based on the classical leadership theory, two channel leadership strategies, i.e. LPL and SL, are considered. The proposed framework first derives the equilibrium price and service quality level decision among the supplier, the logistics provider and the retailer. Then it compares both leadership strategies in terms of the equilibrium prices and service quality theoretically. This article also presents a case study of Arabian dates pricing and supply chain to test the theoretically derived propositions.

Selection of suitable leadership strategy is a critical factor for profit maximization of the supply chain drivers and proper optimization of equilibrium price and service quality. Here, the product's quality and the market's socio-economic condition play an important role in selecting a suitable leadership strategy. A random transformation of the physical market to an e-commerce portal creates a wide variation of the market's socio-economic parameters, affecting the equilibrium pricing and the logistics provider's service quality.

This study proposes a post-COVID-19 resilient agri-supply chain framework considering price and quality-dependent stochastic market demand, incorporating a wide range of socio-economic factors in the model to counteract the effect of rapid behavior change of agri-market due to COVID-19 norms. This research examines the effect of different channel leadership strategies to facilitate suitable decisions on prices and service quality and retrieve the profit of the supplier, retailer and logistics provider. The future models can incorporate competitiveness in logistics outsourcing, fourth-party logistics (4PL) and contract farming in the agri-supply chain. Each of the extensions can open avenues in different directions.

As the post-COVID-19 market and the customer behavior is randomly changing, and the traditional market is rapidly converting into supermarkets and e-commerce portals, this paper examines the model with a wide variety of e-commerce portals with multi-variation of product. It is conclusive that the product's quality and the market's socio-economic behavior significantly impact the equilibrium decision. The drivers of the supply chain must take them into account before choosing a particular channel leadership strategy.

This study considers a multi-product and multi-market (e-commerce) model by integrating a wide variety of products and the market's socio-economic parameters. The model is tested in a price and quality-dependent stochastic market condition, contributing to the literature by reconciling two different channel leadership strategies into the global logistics of fresh agri-product.

This research study aims to delve into the enduring relationship between housing property prices and economic policy uncertainty across eight major Indian cities.

Using the panel non-linear autoregressive distributed lag model, this study meticulously investigates the asymmetric impact of economic policy uncertainty on apartment and house (unit) prices in India during the period from 2000 to 2022.

The findings of this study indicate that economic policy uncertainty exerts a negative influence on property prices, but noteworthy asymmetry is observed, with positive changes in effect having a more pronounced impact than negative changes. This asymmetrical effect is particularly prominent in the case of unit prices.

This research reveals that long-run price trends are also influenced by factors such as interest rates, building costs and housing loans. Through a comprehensive analysis of these factors and their interplay with property prices, this research paper contributes valuable insights to the understanding of the real estate market dynamics in Indian cities.