Search results
1 – 10 of 32Abstract
Purpose
Cooperative driving refers to a notion that intelligent system sharing controlling with human driver and completing driving task together. One of the key technologies is that the intelligent system can identify the driver’s driving intention in real time to implement consistent driving decisions. The purpose of this study is to establish a driver intention prediction model.
Design/methodology/approach
The authors used the NIRx device to measure the cerebral cortex activities for identifying the driver’s braking intention. The experiment was carried out in a virtual reality environment. During the experiment, the driving simulator recorded the driving data and the functional near-infrared spectroscopy (fNIRS) device recorded the changes in hemoglobin concentration in the cerebral cortex. After the experiment, the driver’s braking intention identification model was established through the principal component analysis and back propagation neural network.
Findings
The research results showed that the accuracy of the model established in this paper was 80.39 per cent. And, the model could identify the driver’s braking intent prior to his braking operation.
Research limitations/implications
The limitation of this study was that the experimental environment was ideal and did not consider the surrounding traffic. At the same time, other actions of the driver were not taken into account when establishing the braking intention recognition model. Besides, the verification results obtained in this paper could only reflect the results of a few drivers’ identification of braking intention.
Practical implications
This study can be used as a reference for future research on driving intention through fNIRS, and it also has a positive effect on the research of brain-controlled driving. At the same time, it has developed new frontiers for intention recognition of cooperative driving.
Social implications
This study explores new directions for future brain-controlled driving and wheelchairs.
Originality/value
The driver’s driving intention was predicted through the fNIRS device for the first time.
Details
Keywords
Zhengfa Yang, Qian Liu, Baowen Sun and Xin Zhao
This paper aims to make it convenient for those who have only just begun their research into Community Question Answering (CQA) expert recommendation, and for those who are…
Abstract
Purpose
This paper aims to make it convenient for those who have only just begun their research into Community Question Answering (CQA) expert recommendation, and for those who are already concerned with this issue, to ease the extension of our understanding with future research.
Design/methodology/approach
In this paper, keywords such as “CQA”, “Social Question Answering”, “expert recommendation”, “question routing” and “expert finding” are used to search major digital libraries. The final sample includes a list of 83 relevant articles authored in academia as well as industry that have been published from January 1, 2008 to March 1, 2019.
Findings
This study proposes a comprehensive framework to categorize extant studies into three broad areas of CQA expert recommendation research: understanding profile modeling, recommendation approaches and recommendation system impacts.
Originality/value
This paper focuses on discussing and sorting out the key research issues from these three research genres. Finally, it was found that conflicting and contradictory research results and research gaps in the existing research, and then put forward the urgent research topics.
Details
Keywords
Dongbei Bai, Lei Ye, ZhengYuan Yang and Gang Wang
Global climate change characterized by an increase in temperature has become the focus of attention all over the world. China is a sensitive and significant area of global climate…
Abstract
Purpose
Global climate change characterized by an increase in temperature has become the focus of attention all over the world. China is a sensitive and significant area of global climate change. This paper specifically aims to examine the association between agricultural productivity and the climate change by using China’s provincial agricultural input–output data from 2000 to 2019 and the climatic data of the ground meteorological stations.
Design/methodology/approach
The authors used the three-stage spatial Durbin model (SDM) model and entropy method for analysis of collected data; further, the authors also empirically tested the climate change marginal effect on agricultural productivity by using ordinary least square and SDM approaches.
Findings
The results revealed that climate change has a significant negative effect on agricultural productivity, which showed significance in robustness tests, including index replacement, quantile regression and tail reduction. The results of this study also indicated that by subdividing the climatic factors, annual precipitation had no significant impact on the growth of agricultural productivity; further, other climatic variables, including wind speed and temperature, had a substantial adverse effect on agricultural productivity. The heterogeneity test showed that climatic changes ominously hinder agricultural productivity growth only in the western region of China, and in the eastern and central regions, climate change had no effect.
Practical implications
The findings of this study highlight the importance of various social connections of farm households in designing policies to improve their responses to climate change and expand land productivity in different regions. The study also provides a hypothetical approach to prioritize developing regions that need proper attention to improve crop productivity.
Originality/value
The paper explores the impact of climate change on agricultural productivity by using the climatic data of China. Empirical evidence previously missing in the body of knowledge will support governments and researchers to establish a mechanism to improve climate change mitigation tools in China.
Details
Keywords
Tran Thai Ha Nguyen, Gia Quyen Phan, Wing-Keung Wong and Massoud Moslehpour
This research examines the relationship between market power and liquidity creation in the specific context of bank profitability in the Vietnamese banking sector.
Abstract
Purpose
This research examines the relationship between market power and liquidity creation in the specific context of bank profitability in the Vietnamese banking sector.
Design/methodology/approach
The study applies the methodology proposed by Berger and Bouwman (2009) to demonstrate the creation of bank liquidity through a three-step procedure for investigating the relationship between market power and liquidity creation. The three steps include non-fat liquidity (NFLC), fat liquidity (FLC) and system generalized method of moments estimation for panel data.
Findings
This study finds that liquidity creation increases when a bank has high market power. Further, highly profitable banks positively impact the market power of banks with regard to liquidity creation, relative to less profitable banks. Moreover, bank size, capital, economic growth and interest rate negatively influence bank liquidity creation, while credit risk positively relates to bank liquidity creation.
Research limitations/implications
Measurements used in this study are based on the works of Berger and Bouwman (2009). There are specific variations, relative to Basel III. In addition, other variables significantly impact bank liquidity creation that have not been considered in the models, and a quadratic model should have been considered to measure market power and bank liquidity creation.
Practical implications
This study suggests that managers should control the liquidity of their banks by supervising vulnerable characteristics that have been mentioned herein and emphasizing improvements in profitability. Further, the government may consider encouraging banks to generate more liquidity by modifying regulations concerned with market power or reinforcing policies about improving the transparent business environment.
Originality/value
This study characterizes an attempt to examine the influence of market power on the liquidity creation of banks in Vietnam, which represents one of the most dynamic systems in Asia, with several varied participating banks. The current study also examines the same within the specific context of the modifying impact of the profitability of banks.
Details
Keywords
Kunio Shirahada and Yixin Zhang
This study aims to identify the counterproductive knowledge behavior (CKB) of volunteers in nonprofit organizations and its influencing factors, based on the theories of planned…
Abstract
Purpose
This study aims to identify the counterproductive knowledge behavior (CKB) of volunteers in nonprofit organizations and its influencing factors, based on the theories of planned behavior and well-being.
Design/methodology/approach
An online survey was used to collect 496 valid responses. A structural equation model was constructed, and the relationships among the constructs were estimated via the maximum likelihood method. To analyze the direct and indirect effects, 2,000 bootstrapping runs were conducted. A Kruskal-Wallis test was also conducted to analyze the relationship between the variables.
Findings
A combination of organizational factors and individual attitudes and perceptions can be used to explain CKB. Insecurity about knowledge sharing had the greatest impact on CKB. A competitive organizational norm induced CKB while a knowledge-sharing organizational norm did not have a significant impact. Further, the more self-determined the volunteer activity was, the more the CKB was suppressed. However, well-being did not have a significant direct effect. Volunteers with high levels of well-being and self-determination had significantly lower levels of insecurity about knowledge sharing compared to those who did not.
Practical implications
Well-being arising from volunteering did not directly suppress CKB. To improve organizational efficiency by reducing CKB, nonprofit organization managers should provide intrinsically motivating tasks and interact with the volunteers.
Originality/value
There is a lack of empirical research on CKB in volunteer organizations; therefore, the authors propose a new approach to knowledge management in volunteer activities.
Details
Keywords
Guanchen Liu, Dongdong Xu, Zifu Shen, Hongjie Xu and Liang Ding
As an advanced manufacturing method, additive manufacturing (AM) technology provides new possibilities for efficient production and design of parts. However, with the continuous…
Abstract
Purpose
As an advanced manufacturing method, additive manufacturing (AM) technology provides new possibilities for efficient production and design of parts. However, with the continuous expansion of the application of AM materials, subtractive processing has become one of the necessary steps to improve the accuracy and performance of parts. In this paper, the processing process of AM materials is discussed in depth, and the surface integrity problem caused by it is discussed.
Design/methodology/approach
Firstly, we listed and analyzed the characterization parameters of metal surface integrity and its influence on the performance of parts and then introduced the application of integrated processing of metal adding and subtracting materials and the influence of different processing forms on the surface integrity of parts. The surface of the trial-cut material is detected and analyzed, and the surface of the integrated processing of adding and subtracting materials is compared with that of the pure processing of reducing materials, so that the corresponding conclusions are obtained.
Findings
In this process, we also found some surface integrity problems, such as knife marks, residual stress and thermal effects. These problems may have a potential negative impact on the performance of the final parts. In processing, we can try to use other integrated processing technologies of adding and subtracting materials, try to combine various integrated processing technologies of adding and subtracting materials, or consider exploring more efficient AM technology to improve processing efficiency. We can also consider adopting production process optimization measures to reduce the processing cost of adding and subtracting materials.
Originality/value
With the gradual improvement of the requirements for the surface quality of parts in the production process and the in-depth implementation of sustainable manufacturing, the demand for integrated processing of metal addition and subtraction materials is likely to continue to grow in the future. By deeply understanding and studying the problems of material reduction and surface integrity of AM materials, we can better meet the challenges in the manufacturing process and improve the quality and performance of parts. This research is very important for promoting the development of manufacturing technology and achieving success in practical application.
Details
Keywords
Xiaodong Zhang, Ping Li, Xiaoning Ma and Yanjun Liu
The operating wagon records were produced from distinct railway information systems, which resulted in the wagon routing record with the same oriental destination (OD) was…
Abstract
Purpose
The operating wagon records were produced from distinct railway information systems, which resulted in the wagon routing record with the same oriental destination (OD) was different. This phenomenon has brought considerable difficulties to the railway wagon flow forecast. Some were because of poor data quality, which misled the actual prediction, while others were because of the existence of another actual wagon routings. This paper aims at finding all the wagon routing locus patterns from the history records, and thus puts forward an intelligent recognition method for the actual routing locus pattern of railway wagon flow based on SST algorithm.
Design/methodology/approach
Based on the big data of railway wagon flow records, the routing metadata model is constructed, and the historical data and real-time data are fused to improve the reliability of the path forecast results in the work of railway wagon flow forecast. Based on the division of spatial characteristics and the reduction of dimension in the distributary station, the improved Simhash algorithm is used to calculate the routing fingerprint. Combined with Squared Error Adjacency Matrix Clustering algorithm and Tarjan algorithm, the fingerprint similarity is calculated, the spatial characteristics are clustering and identified, the routing locus mode is formed and then the intelligent recognition of the actual wagon flow routing locus is realized.
Findings
This paper puts forward a more realistic method of railway wagon routing pattern recognition algorithm. The problem of traditional railway wagon routing planning is converted into the routing locus pattern recognition problem, and the wagon routing pattern of all OD streams is excavated from the historical data results. The analysis is carried out from three aspects: routing metadata, routing locus fingerprint and routing locus pattern. Then, the intelligent recognition SST-based algorithm of railway wagon routing locus pattern is proposed, which combines the history data and instant data to improve the reliability of the wagon routing selection result. Finally, railway wagon routing locus could be found out accurately, and the case study tests the validity of the algorithm.
Practical implications
Before the forecasting work of railway wagon flow, it needs to know how many kinds of wagon routing locus exist in a certain OD. Mining all the OD routing locus patterns from the railway wagon operating records is helpful to forecast the future routing combined with the wagon characteristics. The work of this paper is the basis of the railway wagon routing forecast.
Originality/value
As the basis of the railway wagon routing forecast, this research not only improves the accuracy and efficiency for the railway wagon routing forecast but also provides the further support of decision-making for the railway freight transportation organization.
Details
Keywords
Lifu Li, Kyeong Kang and Osama Sohaib
This study aims to present the Chinese entrepreneurial environment and explore Chinese tertiary students’ online-startup motivation on live streaming platforms. Based on the COM-B…
Abstract
Purpose
This study aims to present the Chinese entrepreneurial environment and explore Chinese tertiary students’ online-startup motivation on live streaming platforms. Based on the COM-B behaviour changing theory, this paper discovers various influencing factors from environmental opportunity and personal capability aspects. It analyses their effects under the cooperative system established among official departments, industries and universities. Meanwhile, considering social and cultural control, it also refers to the uncertainty-avoidance dimension from the Hofstede cultural theory and re-evaluates its influence on Chinese tertiary students’ online-startup motivation.
Design/methodology/approach
The authors analyse 474 responses from online questionnaires through partial least squares path modelling and variance-based structural equation modelling. The paper claims that environmental opportunity and personal capability factors positively affect students’ online-startup motivation, but uncertainty-avoidance thinking plays a negative role. The study also measures the importance-performance map analysis to explore additional findings and discuss managerial implications.
Findings
Both platform support and official department support positively impact Chinese tertiary students’ online-startup motivation and entrepreneurial skills learned from universities are beneficial for them to build online-startup confidence. Meanwhile, influenced by the cooperative system implemented among official departments, industries and universities, official department support positively affects platform support and entrepreneurial skills. Conversely, influenced by Chinese traditional Confucian culture, uncertainty-avoidance thinking negatively affects tertiary students’ online-startup motivation.
Originality/value
This paper demonstrates the analysis of Chinese tertiary students’ online-startup motivation drawing on the COM-B behaviour changing and Hofstede cultural theories. Specifically, this study divides influencing factors into three specific aspects as follows: environmental opportunity, personal capability and social and cultural control. Unlike existing research applying traditional research models, the combination of the COM-B behaviour changing theory and the Hofstede cultural theory could be conducive to making the research model reflect influencing factors and present their different relationships.
Details
Keywords
Mojtaba Izadi, Aidin Farzaneh, Mazher Mohammed, Ian Gibson and Bernard Rolfe
This paper aims to present a comprehensive review of the laser engineered net shaping (LENS) process in an attempt to provide the reader with a deep understanding of the…
Abstract
Purpose
This paper aims to present a comprehensive review of the laser engineered net shaping (LENS) process in an attempt to provide the reader with a deep understanding of the controllable and fixed build parameters of metallic parts. The authors discuss the effect and interplay between process parameters, including: laser power, scan speed and powder feed rate. Further, the authors show the interplay between process parameters is pivotal in achieving the desired microstructure, macrostructure, geometrical accuracy and mechanical properties.
Design/methodology/approach
In this manuscript, the authors review current research examining the process inputs and their influences on the final product when manufacturing with the LENS process. The authors also discuss how these parameters relate to important build aspects such as melt-pool dimensions, the volume of porosity and geometry accuracy.
Findings
The authors conclude that studies have greatly enriched the understanding of the LENS build process, however, much studies remains to be done. Importantly, the authors reveal that to date there are a number of detailed theoretical models that predict the end properties of deposition, however, much more study is necessary to allow for reasonable prediction of the build process for standard industrial parts, based on the synchronistic behavior of the input parameters.
Originality/value
This paper intends to raise questions about the possible research areas that could potentially promote the effectiveness of this LENS technology.
Details
Keywords
Yusuf Adeneye, Shahida Rasheed and Say Keat Ooi
This study aims to examine the relationship between financial inclusion, CO2 emissions and financial sustainability across 17 African countries.
Abstract
Purpose
This study aims to examine the relationship between financial inclusion, CO2 emissions and financial sustainability across 17 African countries.
Design/methodology/approach
Data were sourced from the World Development Indicators for the period 2004-2021. The study performs the principal component analysis, panel fixed effects model and quantile regression estimations to investigate the relationship between financial inclusion, CO2 emissions and financial sustainability.
Findings
The study finds that an increase in automated teller machine (ATM) penetration rate, savings and credits increases CO2 emissions. Findings also reveal that financial sustainability reduces financial inclusion, with significant negative effects on the conditional mean of CO2 emissions and the conditional distribution of CO2 emissions across quantiles.
Originality/value
This study is beneficial for policymakers, particularly in the age of digitalization and drive for low-carbon emissions, to develop green credits for energy players and investors to take up renewable and green energy projects characterized by high levels of carbon storage and carbon capture. Further, the banking sector’s credits and liquid assets should be used to finance alternative banking energy-related equipment and services, such as solar photovoltaic wireless ATMs, and fewer bank branches.
Details