Search results

This paper aims to investigate an autonomous obstacle-surmounting method based on a hybrid gait for the problem of crossing low-height obstacles autonomously by a six wheel-legged robot. The autonomy of obstacle-surmounting is reflected in obstacle recognition based on multi-frame point cloud fusion.

In this paper, first, for the problem that the lidar on the robot cannot scan the point cloud of low-height obstacles, the lidar is driven to rotate by a 2D turntable to obtain the point cloud of low-height obstacles under the robot. Tightly-coupled Lidar Inertial Odometry via Smoothing and Mapping algorithm, fast ground segmentation algorithm and Euclidean clustering algorithm are used to recognize the point cloud of low-height obstacles and obtain low-height obstacle in-formation. Then, combined with the structural characteristics of the robot, the obstacle-surmounting action planning is carried out for two types of obstacle scenes. A segmented approach is used for action planning. Gait units are designed to describe each segment of the action. A gait matrix is used to describe the overall action. The paper also analyzes the stability and surmounting capability of the robot’s key pose and determines the robot’s surmounting capability and the value scheme of the surmounting control variables.

The experimental verification is carried out on the robot laboratory platform (BIT-6NAZA). The obstacle recognition method can accurately detect low-height obstacles. The robot can maintain a smooth posture to cross low-height obstacles, which verifies the feasibility of the adaptive obstacle-surmounting method.

The study can provide the theory and engineering foundation for the environmental perception of the unmanned platform. It provides environmental information to support follow-up work, for example, on the planning of obstacles and obstacles.

This study aims to present a type of metamorphic mechanism-based quadruped crawling robot. The trunk design of the robot has a metamorphic mechanism, which endows it with excellent crawling capability and adaptability in challenging environments.

The robot consists of a metamorphic trunk and four series-connected three-joint legs. First, the walking and steering strategy is planned through the stability and mechanics analysis. Then, the walking and steering performance is examined using virtual prototype technology, as well as the efficacy of the walking and turning strategy.

The metamorphic quadruped crawling robot has wider application due to its variable trunk configuration and excellent leg motion space. The robot can move in two modes (constant trunk and trunk configuration transformation, respectively, while walking and rotating), which exhibits outstanding stability and adaptability in the examination and verification of prototypes.

The design can enhance the capacity of the quadruped crawling robot to move across a complex environment. The virtual prototype technology verifies that the proposed walking and steering strategy has good maneuverability and stability, which considerably expands the application opportunity in the fields of complicated scene identification and investigation.

This study proposes a predictive neural network model reference decoupling control method for the coupling problem between the leg joints of hydraulic quadruped robots, and verifies its decoupling effect..

The machine–hydraulic cross-linking coupling is studied as the coupling behavior of the hydraulically driven quadruped robot, and the mechanical dynamics coupling force of the robot system is controlled as the disturbance force of the hydraulic system through the Jacobian matrix transformation. According to the principle of multivariable decoupling, a prediction-based neural network model reference decoupling control method is proposed; each module of the control algorithm is designed one by one, and the stability of the system is analyzed by the Lyapunov stability theorem.

The simulation and experimental research on the robot joint decoupling control method is carried out, and the prediction-based neural network model reference decoupling control method is compared with the decoupling control method without any decoupling control method. The results show that taking the coupling effect experiment between the hip joint and knee joint as an example, after using the predictive neural network model reference decoupling control method, the phase lag of the hip joint response line was reduced from 20.3° to 14.8°, the amplitude attenuation was reduced from 1.82% to 0.21%, the maximum error of the knee joint coupling line was reduced from 0.67 mm to 0.16 mm and the coupling effect between the hip joint and knee joint was reduced from 1.9% to 0.48%, achieving good decoupling.

The prediction-based neural network model reference decoupling control method proposed in this paper can use the neural network model to predict the next output of the system according to the input and output. Finally, the weights of the neural network are corrected online according to the predicted output and the given reference output, so that the optimization index of the neural network decoupling controller is extremely small, and the purpose of decoupling control is achieved.

The purpose of this paper is to introduce a motion control method for WFF-AmphiRobot, which can effectively realize the flexible motion of the robot on land, underwater and in the transition zone between land and water.

Based on the dynamics model, the authors selected the appropriate state variables to construct the state space model of the robot and estimated the feedback state of the robot through the maximum a posteriori probability estimation. The nonlinear predictive model controller of the robot is constructed by local linearization of the model to perform closed-loop control on the overall motion of the robot. For the control problem of the terminal trajectory, using the neural rhythmic movement theory in bionics to construct a robot central pattern generator (CPG) for real-time generation of terminal trajectory.

In this paper, the motion state of WFF-AmphiRobot is estimated, and a model-based overall motion controller for the robot and an end-effector controller based on neural rhythm control are constructed. The effectiveness of the controller and motion control algorithm is verified by simulation and physical prototype motion experiments on land and underwater, and the robot can ideally complete the desired behavior.

The paper designed a controller for WFF-AmphiRobot. First, when constructing the robot state estimator in this paper, the robot dynamics model is introduced as the a priori estimation model, and the error compensation of the a priori model is performed by the method of maximum a posteriori probability estimation, which improves the accuracy of the state estimator. Second, for the underwater oscillation motion characteristics of the flipper, the Hopf oscillator is used as the basis, and the flipper fluctuation equation is modified and improved by the CPG signal is adapted to the flipper oscillation demand. The controller effectively controls the position error and heading angle error within the desired range during the movement of the WFF-AmphiRobot.

Humanoid robots have been utilized in many fields such as medical, construction, and disaster response. While humanoid robots nowadays can achieve great capabilities, the one-leg balancing task still poses a challenging problem. This paper aims to propose a novel approach to solve the problem.

To aid the balance of one leg in humanoid robot, an external balance mechanism is inserted to the back of the humanoid robot. First, a dynamic model of the humanoid robot with balance mechanism and its simplified model are introduced. Second, a backstepping-based control method is utilized to build the proposed controller for one-leg stance system through two steps. For the first step, a minimum observer-based controller with a virtual control input is used to control the first sub-system reaching the desired reference input. For the second step, a virtual control input is considered as a reference input of a second sub-system, then a model reference adaptive controller (MRAC) is employed to control the second sub-system reaching the virtual control input in presence of uncertainties. By using the external balance mechanism, the sideway balancing task is separated from normal walking function. Furthermore, the utilization of the balance mechanism ensures the humanoid robot's hip adduction does not exceed the threshold of a human when walking. Finally, a simulation study is carried out to evaluate the effectiveness of the proposed method.

This paper proposes a model reference adaptive control using state observer for balancing one leg of humanoid robot in stance phase that extends our previous research (Tran et al., 2021).

The main research contents have been introduced.

This paper aims to focus on the spatial docking task of unmanned vehicles under ground conditions. The docking task of military unmanned vehicle application scenarios has strict requirements. Therefore, how to design a docking robot mechanism to achieve accurate docking between vehicles has become a challenge.

In this paper, first, the docking mechanism system is described, and the inverse kinematics model of the docking robot based on Stewart is established. Second, the genetic algorithm-based optimization method for multiobjective parameters of parallel mechanisms including workspace volume and mechanism flexibility is proposed to solve the problem of multiparameter optimization of parallel mechanism and realize the docking of unmanned vehicle space flexibility. The optimization results verify that the structural parameters meet the design requirements. Besides, the static and dynamic finite element analysis are carried out to verify the structural strength and dynamic performance of the docking robot according to the stiffness, strength, dead load and dynamic performance of the docking robot. Finally, taking the docking robot as the experimental platform, experiments are carried out under different working conditions, and the experimental results verify that the docking robot can achieve accurate docking tasks.

Experiments on the docking robot that the proposed design and optimization method has a good effect on structural strength and control accuracy. The experimental results verify that the docking robot mechanism can achieve accurate docking tasks, which is expected to provide technical guidance and reference for unmanned vehicles docking technology.

This research can provide technical guidance and reference for spatial docking task of unmanned vehicles under the ground conditions. It can also provide ideas for space docking missions, such as space simulator docking.

In certain industrial operations, workers are required to stand for a prolonged duration. This leads to muscular fatigue in the legs, posing a threat to the productivity and well-being of the workers. This paper aims to address this problem of women in the clothing industry with an exoskeleton designed for lower extremities and improve productivity.

Ulrich’s product design approach has been followed with suitable modifications. The methodology involves a study to justify the need for this product and terminating at the physical and virtual evaluations of the product. Required anthropometric parameters are considered along the design process.

The exoskeleton discussed in this paper is an innovative product made of Aluminium 6061 alloy. During the simulation phase of the product, total von-mises stresses to a part bearing 1 leg were 31.5 MPa, 94.7 MPa and 284 MPa for aluminium, SS308 and springs, respectively. These values are below the yield limit by a great margin. Based on a user survey of this product, 72% of the targeted customers were interested in buying. Also, comparing electromyography (EMG) mean value of the voltage between workers’ leg with and without exoskeleton revealed that there was an improvement in the voltage by 2.5% when exoskeleton was used.

This paper emphasizes, for the first time – the necessity of an exoskeleton indigenized for the Indian population and the process of realizing it by designing an exoskeleton.

Legged walking robots have numerous advantages over the wheel or tracked robots due to their strong operational ability and exposure to the complex environment. This paper aims to present details about the mechanical formation and a new conceptual elliptical trajectory generation discussed throughout the paper of the quadruped robot.

Initially, a realistic CAD model of the four-legged robot is developed in Solidwork-2019. The proposed model’s forward and inverse kinematics equations are deduced using Denavit–Hartenberg parameters. Based on geometry and kinematics, manipulability and obstacle avoidance are investigated. A method of galloping trajectory is proposed for aiming the increase of upright direction impulse, which is produced by ground reaction force at each step frequency. Furthermore, the locomotion equation of the ellipse trajectory is derived by setting transition angle polynomial of free-fall phase, stance phase and swing phase and the constraints.

Finally, a successive simulation on a 2D sagittal plane is performed to check and verify the usefulness of the proposed trajectory. Before the development of the full quadruped, a single prototype leg is generated for experimental verification of the dynamic simulations.

The proposed trajectory is novel in that it uses force tracking control, which is intended to improve the quadruped robot’s robustness and stability.

This study aims to the complex and unpredictable terrain environment of the Qinghai-Tibet Plateau scientific research station, such as cement road, wetland, gravel desert, snowfield, ice surface, grassland, slimy ground, steep slope, step, etc., a reconfigurable walking mechanism based on two movement modes of wheel and triangular crawler was proposed.

By analyzing the deformation mechanism of the walking mechanism, a reconfigurable wheel-crawler-integrated walking mechanism and the configuration scheme are designed. The analysis of the kinematics and mechanical properties of the swing arm system and the deformation mechanism of the walking mechanism.

The reconfigurable wheel-crawler-integrated walking mechanism can be switched between the wheel and triangular crawler modes by driving the deformation mechanism. Through the numerical simulation of its movement process, and the trial production and experiment of the prototype, indicates the validity of the reconfigurable wheel-crawler-integrated walking mechanism design.

The work of this paper provides a reconfigurable wheel-crawler-integrated-walking mechanism, which can be used by robots in the Qinghai-Tibet Plateau scientific research station. It has excellent reconfigurability and can effectively improve the robot’s adaptability to complex terrain.

This study aims to improve the automatic leveling performance of tractor body in hilly and mountainous areas by designing a kind of controllable and adaptive leveling mechanism of tractor body.

The mechanism is mainly composed of longitudinal slope leveling mechanism, transverse slope leveling mechanism and control components. According to the tractor body attitude in operation, the longitudinal slope leveling and lateral slope leveling can coordinate to realize the adaptive adjustment of tractor body. For this mechanism, the support mode of the linear three-point support and plane positioning combining is designed, and the leveling method of electromechanical combination is designed. The servo motor controls the longitudinal slope leveling mechanism through the reducer with self-locking function to realize the longitudinal leveling, and the servo driver controls the expansion and contraction of electric cylinder to realize lateral leveling. The designed mode can realize the relative independence and coordination of leveling in different directions.

The performance test results of the leveling mechanism are shown: the mechanism can work normally; the leveling accuracy can reach within 1°; and the leveling accuracy and stability can meet the design requirements. The leveling accuracy and stability of longitudinal slope are higher than that of lateral slope, and the coordination leveling effect of longitudinal slope and lateral slope is better than that of the independent leveling.

This study provides a technical reference for the design of leveling device of agricultural machines and tools in hilly and mountainous areas.