Search results

The objective of this study was to evaluate the technical-economic process efficiency of obtaining simultaneous lipo-soluble (LSF) and water-soluble (WSF) fractions from annatto seeds.

The batches of annatto seeds were submitted to the refrigerated solid-liquid extraction process in four stages: pre-extraction, aqueous extraction, separation by decantation and filtration. After that, LSF and WSF from annatto seeds were obtained. The process efficiency and the quality of LSF and WSF were analyzed in terms of average yield and bioactive compounds (bixin, norbixin, phenolics and flavonoids) and their antioxidant and antimicrobial activities. Furthermore, they were economically evaluated in terms of costs of manufacturing and profitability parameters.

The process was efficient in terms of overall average yield (LSF = 8.68% and WSF = 2.76%) (w/w) and in terms of quality, mainly with higher average yields of bixin (82.34% in LSF) and norbixin (29.59% in WSF) (w/w). The concentration of bioactive compounds in the fractions promoted an increase in inhibiting free radicals (DPPH* and ABTS*+) and in the ferric-reducing power (FRAP). LSF showed a minimum inhibitory concentration of 0.06 mg mL-1 for S. aureus and 0.13 mg mL-1 for S. Typhimurium and S. Enteritidis. The lowest manufacturing costs were obtained for the LSF due to its higher extraction yield compared to the WSF. Plants on an industrial scale of 100 and 1000 L were considered economically viable, with a return on investment of 5 and 2 years.

Thus, fractions (WSF and LSF) can be applied as natural additives, as sources of bioactive compounds for nutraceutical and/or pharmaceutical, and in the development of other innovative processes. These results have practical applicability for pharmaceutical and food industry.

1. Green processing of annatto seeds obtains fractions rich in antioxidant compounds.

2. Efficiently presents a high yield of bixin and other bioactive compounds.

3. Effective in concentrating compounds that inhibit microbial growth.

4. Fractions are more accessible sources of bioactive compounds for isolation.

5. Cost of manufacturing (COM) and profitability are studied.

Green processing of annatto seeds obtains fractions rich in antioxidant compounds.

Efficiently presents a high yield of bixin and other bioactive compounds.

Effective in concentrating compounds that inhibit microbial growth.

Fractions are more accessible sources of bioactive compounds for isolation.

Cost of manufacturing (COM) and profitability are studied.

There is an urgent need to develop climate-smart agrosystems capable of mitigating climate change and adapting to its effects. Conventional agricultural practices prevail in Mauritius, whereby synthetic chemical fertilizers, pesticides and insecticides are used. It should be noted that Mauritius remains a net-food importing developing country of staple food such as cereals and products, roots and tubers, pulses, oil crops, vegetables, fruits and meat (FAO, 2011). In Mauritius, the agricultural sector faces extreme weather conditions like drought or heavy rainfall. Moreover, to increase the crop yields, farmers tend to use 2.5 times the prescribed amount of fertilizers in their fields. These excess fertilizers are washed away during heavy rainfall and contaminate lakes and river waters. By using smart irrigation and fertilization system, a better management of soil water reserves for improved agricultural production can be implemented. Soil Nitrogen, Phosphorus and Potassium (NPK) content, humidity, pH, conductivity and moisture data can be monitored through the cloud platform. The data will be processed at the level of the cloud and an appropriate mix of NPK and irrigation will be used to optimise the growth of the crops. Machine learning algorithms will be used for the control of the land drainage, fertilization and irrigation systems and real time data will be available through a mobile application for the whole system. This will contribute towards the Sustainable Development Goals (SDGs): 2 (Zero Hunger), 11 (Sustainable cities and communities), 12 (Responsible consumption and production) and 15 (Life on Land). With this project, the yield of crops will be boosted, thus reducing the hunger rate (SDG 2). On top of that, this will encourage farmers to collect the waters and reduce fertilizer consumption thereafter sustaining the quality of the soil on which they are cultivating the crops, thereby increasing their yields (SDG 15).

This study aims to prepare an imprinted composite membrane with grafted temperature-sensitive blocks for the efficient adsorption and separation of rhenium(Re) from aqueous solutions.

PVDF resin membrane was used as the substrate, dopamine and chitosan (CS) were used to modify the membrane surface and temperature-sensitive block PDEA was grafted on the membrane surface. Then acrylic acid (AA) and N-methylol acrylamide (N-MAM) were used as the functional monomers, ethyleneglycol dimethacrylate (EGDMA) as the cross-linker and ascorbic acid-hydrogen peroxide (Vc-H₂O₂) as the initiator to obtain the temperature-sensitive ReO4⁻ imprinted composite membranes.

The effect of the preparation process on the performance of CS–Re–TIICM was investigated in detail, and the optimal preparation conditions were as follows: the molar ratios of AA–NH₄ReO₄, N-MAM and EGDMA were 0.13, 0.60 and 1.00, respectively. The optimal temperature and time of the reaction were 40 °C and 24 h. The maximum adsorption capacity of CS–Re–TIICM prepared under optimal conditions was 0.1071 mmol/g, and the separation was 3.90 when MnO4⁻ was used as the interfering ion. The quasi first-order kinetics model and Langmuir model were more suitable to describe the adsorption process.

With the increasing demand for Re, the recovery of Re from Re-containing secondary resources becomes important. This study demonstrated a new material that could be separated and recovered Re in a complex environment, which could effectively alleviate the conflict between the supply and demand of Re.

This contribution provided a new material for the selective separation and purification of ReO4⁻, and the adsorption capacity and separation of CS–Re–TIICM were increased with 1.673 times and 1.219 time compared with other Re adsorbents, respectively. In addition, when it was used for the purification of NH₄ReO₄ crude, the purity was increased from 91.950% to 99.999%.

The purpose of this paper is to study and analyze the effects of fly ash (FA) as a mineral admixture on compressive strength (CS), carbonation resistance and corrosion resistance of reinforced concrete (RC). In addition, the utilization of inexpensive and abundantly available FA as a cement replacement in concrete has several benefits including reduced OPC usage and elimination of the FA disposal problem.

Reinforcement corrosion and carbonation significantly affect the strength and durability of the RC structures. Also, the utilization of FA as green corrosion inhibitors, which are nontoxic and environmentally friendly alternatives. This review discusses the effects of FA on the mechanical characteristics of concrete. Also, this review analyzes the impact of FA as a partial replacement of cement in concrete and its effect on the depth of carbonation in concrete elements and the corrosion rate of embedded steel as well as the chemical composition and microstructure (X-ray diffraction analysis and scanning electron microscopy) of FA concrete were also reviewed.

This review provides a clear analysis of the available study, providing a thorough overview of the current state of knowledge on this topic. Regarding concrete CS, the findings indicate that the incorporation of FA often leads to a loss in early-age strength. However, as the curing period increased, the strength of fly ash concrete (FAC) increased with or even surpassed that of conventional concrete. Analysis of the accelerated carbonation test revealed that incorporating FA into the concrete mix led to a shallower carbonation depth and slower diffusion of carbon dioxide (CO₂) into the concrete. Furthermore, the half-cell potential test shows that the inclusion of FA increases the durability of RC by slowing the rate of steel-reinforcement corrosion.

This systematic review analyzes a wide range of existing studies on the topic, providing a comprehensive overview of the research conducted so far. This review intends to critically assess the enhancements in mechanical and durability attributes (such as CS, carbonation and corrosion resistance) of FAC and FA-RC. This systematic review has practical implications for the construction and engineering industries. This can support engineers and designers in making informed decisions regarding the use of FA in concrete mixtures, considering both its benefits and potential drawbacks.

The aim of this paper is to assess whether the current European target to increase the areas under organic farming to 25% by 2030 is attainable and whether the simple increase in areas under organic farming may be sufficient to improve the sustainability of European agriculture.

The analysis has been carried out through a simple data processing related to areas under organic farming, for the period 2012–2020 (Eurostat database), in order to highlight the trends of areas under organic farming and to verify whether the annual average change rates may be compatible with the stated target.

The analysis showed that organic farming has a productive weight not corresponding to the amount on the total of the areas under cultivation and a small impact on the total of food consumption. It is a plausible hypothesis, the one that shows the increase in areas under organic farming will engage forms of agriculture and farms that, already, are more sustainable, so the achievement of 25% target will not particularly impact the European potential productive and the less environmental sustainable forms of agriculture.

This paper contributes to the debate, involving scientific community, policy maker and civil society, about the real contribution of organic farming to sustainability, and it will be developed in future research.

This study aims to examine the effect of traditional fermentation on gari’s total heavy metal and mineral nutrient content.

This study used a quantitative approach, descriptive-analytical design to baseline the risk of heavy metals and experimental design to assess the effect of traditional fermentation. Data were analyzed using descriptives, univariate and multivariate analysis.

Although gari is rich in mineral nutrients (total calcium 3.9 ± 0.1 g/kg, copper 5.5 ± 0.02 mg/kg, iron 97.1 ± 5.8 mg/kg, potassium 9.1 ± 0.29 g/kg and zinc 3.4 ± 0.11 mg/kg), the significant levels of heavy metals (total arsenic 1.2 ± 0.01, cadmium 2.5 ± 0.04, lead 1.7 ± 0.01, mercury 2.8 ± 0.01 and tin 1.7 ± 0.02 mg/kg) present are a cause for concern. The results further suggested that traditional fermentation has reductive effects on some heavy metals and stabilizing or concentrating effects on mineral nutrients.

This paper provides evidence that traditional fermentation may have exploitable differential effects on heavy metal contaminants and mineral nutrients that should be further explored.

Thise study reports fermentation implications for mitigating food with high heavy metal contaminants with minimal nutrient loss.

This study fulfills an identified need to optimize traditional fermentation to ensure food safety and nutrient security.

This study aims to use whiteness (WI) and yellowness indices (YI) that were calculated from the International Commission on Illumination (CIE) color parameter to evaluate the efficiency of some triazole fungicides [propiconazole (C₁₅H₁₇Cl₂N₃O₂) and tebuconazole (C₁₆H₂₂ClN₃O)] to protect wooden artifacts from fungal deterioration.

Archeological wooden samples were collected from some historical Islamic buildings in Cairo, Egypt. Three species of fungi were identified in previous work. Propiconazole and tebuconazole with different concentrations treated the infected wooden samples aged for different periods. WI and YI of studied samples were measured using UV spectrophotometer. Calibration and uncertainty estimation accompanied by color measurement were studied.

Studying the uncertainty sources of diffuse reflection of the standard white tiles revealed that the uncertainty of calibration for both the spectrophotometer and white tiles had the highest contribution. The treated samples with tebuconazole and propiconazole fungicides gave good resistance against fungal deterioration at 0.50% for WI and YI.

This study presents the importance of colorimetry in the conservation field because they are considered one of the most important criteria to evaluate conservation materials. From color measurements and their uncertainties, it became clear that triazole fungicides have good efficiency in the protection of wooden artifacts from fungal deterioration. The value of this study is that propiconazole and tebuconazole fungicides at 0.50% can be applied to archaeological wood that is endangered to improper conditions, especially in the case of high levels of relative humidity.

The purpose of this paper is to study the correlation between different topographies and the reaction of Ulva Linza fouling species.

In this research, topographies with a different method, such as hot embossing and hot pulling, were achieved, and biological analyses were done with macroalgae Ulva Linza cells. The effect of topography via local binding geometry (honeycomb size gradients) and Wenzel roughness on the settling of Ulva microorganisms was tested.

As a result, Ulva spores confirmed different reactions to a similar set of tapered microstructures that was in agreement with the results on distinct honeycombs. The local binding geometry and the Wenzel roughness factor “r” were dominant on settling of Ulva Linza spores.

The reaction of an organism at the interface of vehicles’ substrate is powerfully affected by surface topographies.

The best embedment occurred on structures with bigger sizes than Ulva Linza’s spores. The density of settled spores was proportional to Wenzel roughness and the spores favour to attach to “kink sites” positions.

Unfortunately, unpleasant aggregation of marine biofouling on marine vehicles’ surfaces, generate terrific difficulties in the relevant industry.

There was a sharp relationship between Wenzel roughness and settle of Ulva Linza spores. The local binding geometry and the Wenzel roughness factor “r” were dominant on settling of Ulva Linza spores.

This paper covers the development of a novel defect model for concrete highway bridges. The proposed defect model is intended to facilitate the identification of bridge’s condition information (i.e. defects), improve the efficiency and accuracy of bridge inspections by supporting practitioners and even machines with digitalised expert knowledge, and ultimately automate the process.

The research design consists of three major phases so as to (1) categorise common defect with regard to physical entities (i.e. bridge element), (2) establish internal relationships among those defects and (3) relate defects to their properties and potential causes. A mixed-method research approach, which includes a comprehensive literature review, focus groups and case studies, was employed to develop and validate the proposed defect model.

The data collected through the literature and focus groups were analysed and knowledge were extracted to form the novel defect model. The defect model was then validated and further calibrated through case study. Inspection reports of nearly 300 bridges in China were collected and analysed. The study uncovered the relationships between defects and a variety of inspection-related elements and represented in the form of an accessible, digitalised and user-friendly knowledge model.

The contribution of this paper is the development of a defect model that can assist inexperienced practitioners and even machines in the near future to conduct inspection tasks. For one, the proposed defect model can standardise the data collection process of bridge inspection, including the identification of defects and documentation of their vital properties, paving the path for the automation in subsequent stages (e.g. condition evaluation). For another, by retrieving rich experience and expert knowledge which have long been reserved and inherited in the industrial sector, the inspection efficiency and accuracy can be considerably improved.

This study aims to provide a salt ready-mix to instant fried noodles manufacturers.

Response surface methodology was used to get optimized salt ready-mix based on carbonate salt, disodium phosphate, tripotassium phospahte, sodium hexametaphosphate and sodium chloride. Peak viscosity of flour and yellowness, cooking loss and hardness of noodles were considered as response factors for finding optimized salt formulation.

The results showed that salts have an important role in governing quality of noodles. Optimum levels of five independent variables of salts, namely, carbonate salt (1:1 mixture of sodium to potassium carbonate), disodium phosphate, sodium hexametaphosphate, tripotassium phosphate and sodium chloride were 0.64%, 0.29%, 0.25%, 0.46% and 0.78% on flour weight basis, respectively.

To the best of the authors’ knowledge, this is the first study to assess the effect of different combinations of different salts on the quality of noodles. These findings will also benefit noodle manufacturers, assisting in production of superior quality noodles.