Search results

The purpose of this paper is to present a comparative study of flight circumstances, dynamic stability characteristics and controllability for two transport aircraft in severe atmospheric turbulence at transonic cruise flight for the purpose to obtain the prevention concepts of injuries to passengers and crew members for pilot training in International Air Transport Association (IATA) – Loss of Control In-flight (LOC-I) program.

A twin-jet and a four-jet transport aircraft encountering severe atmospheric turbulence are the study cases for this paper. The nonlinear unsteady aerodynamic models are established through flight data mining and the fuzzy-logic modeling technique based on the flight data of flight data recorder. This method can be adopted to examine the influence of horizontal wind shear and crosswind on loss of control, dynamic stability characteristics and controllability for transport aircraft in different weights and different sizes in tracking aviation safety of existing different types of aircraft.

The horizontal wind shear or crosswind before the turbulence encounter will easily induce rolling motion and then initiate the sudden plunging motion during the turbulence encounter. The roll rate will increase the oscillatory rolling motion during plunging motion, if the rolling damping is insufficient. The drop-off altitude will be enlarged by the oscillatory rolling motion during the sudden plunging motion.

A lack of the measurement data of vertical wind speed sensor on board to verify the estimated values of damping term is one of the research limitations for this study. The fact or condition of being severe in sudden plunging motion can be judged through the analysis of oscillatory derivatives with both dynamic stability and damping terms.

The roll rate will increase the oscillatory rolling motion during plunging motion, if the rolling damping is insufficient. The drop-off altitude will be enlarged by the oscillatory rolling motion during the sudden plunging motion. The horizontal wind shear or crosswind before the turbulence encounter will easily induce rolling motion and then initiated the sudden plunging motion during the turbulence encounter. If the drift angle is large, to turn off the autopilot of yaw control first and stabilize the rudder by the pedal. When passing through the atmosphere turbulence area, the pilots do not need to amend the heading angle urgently.

The flight safety prevention in avoidance of injuries for passengers and cabin crews is essential for the airlines. The horizontal wind shear or crosswind before the turbulence encounter will easily induce rolling motion and then initiated the sudden plunging motion during the turbulence encounter.

The flight safety prevention in avoidance of injuries for passengers and cabin crews is essential. The present assessment method is an innovation to examine the loss of control problems of aviation safety and promote the understanding of aerodynamic responses of the jet transport aircraft. It is expected to provide a valuable lecture for the international training courses for IATA – LOC-I program after this paper is being published.

The purpose of this study is to analyze influence of airfoil profile on lateral-directional flying quality of flying wing aircraft. The lateral-directional stability is always insufficient for aircraft with the layout due to the absence of vertical stabilizer. A flying wing aircraft with double-swept wing is used as research object in the paper.

The 3D model is established for the aircraft with flying wing layout, and parametric modeling is carried out for airfoil mean camber line of the aircraft to analyze lateral-directional stability of the aircraft with different camber line parameters. To increase computational efficiency, vortex lattice method is adopted to calculate aerodynamic coefficients and aerodynamic derivatives of the aircraft.

It is found from the research results that roll mode and spiral mode have a little effect on lateral-directional stability of the aircraft but Dutch roll mode is the critical factor affecting flying quality level of such aircraft. Even though changes of airfoil mean line parameters can greatly change assessment parameters of aircraft lateral-directional flying quality, that is kind of change cannot have a fundamental impact on level of flying quality of the aircraft. In case flat shape parameters are determined, the airfoil profile has a limited impact on Dutch roll mode.

Influences of airfoil profile on lateral-directional flying quality of aircraft with double-swept flying wing layout are revealed in the thesis and some important rules and characteristics are also summarized to lay a theoretical basis for design of airfoil and flight control system of aircraft with the layout.

Unlike conventional aircraft, birds can glide without a vertical tail. The purpose of this paper is to analyse the influence of dihedral angle spanwise distribution on lateral-directional dynamic stability by the simulation, calculation in the development of the bird-inspired aircraft and the flight testing.

The gliding magnificent frigatebird (Fregata magnificens) was selected as the study object. The geometric and mass model of the study object were developed. Stability derivatives and moments of inertia were obtained. The lateral-directional stability was assessed under different spanwise distributions of dihedral angle. A bird-inspired aircraft was developed, and a flight test was carried out to verify the analysed results.

The results show that spanwise distribution changing of dihedral angle has influence on the lateral-directional mode stability. All of the analysed configurations have convergent Dutch roll mode and rolling mode. The key role of dihedral angle changing is to achieve a convergent spiral mode. Flight test results show that the bird-inspired aircraft has a well-convergent Dutch roll mode.

The theory that birds can achieve its lateral-directional stability by changing its dihedral angle spanwise distribution may explain the stability mechanism of gliding birds.

This paper helps to improve the understanding of bird gliding stability mechanism and provides bio-inspired solutions in aircraft designing.

This paper aims to deal with the experimental estimation of both longitudinal- and lateral-directional aerodynamic characteristics of a new twin-engine, 11-seat commuter aircraft.

Wind tunnel tests have been conducted on a 1:8.75 scaled model. A modular model (fuselage, wing, nacelle, winglet and tail planes) has been built to analyze both complete aircraft aerodynamic characteristics and mutual effects among components. The model has been also equipped with trailing edge flaps, elevator and rudder control surfaces.

Longitudinal tests have shown the goodness of the aircraft design in terms of aircraft stability, control and trim capabilities at typical clean, take-off and landing conditions. The effects of fuselage, nacelles and winglets on lift, pitching moment and drag coefficients have been investigated. Lateral-directional stability and control characteristics of the complete aircraft and several aircraft component combinations have been tested to estimate the aircraft components’ interactions.

The experimental tests have been performed at a Reynolds number of about 0.6e6, whereas the free-flight Reynolds number range should be between 4.5e6 and 9.5e6. Thus, all the measured data suffer from the Reynolds number scaling effect.

The study provides useful aerodynamic database for P2012 Traveller commuter aircraft.

The paper deals with the experimental investigation of a new general aviation 11-seat commuter aircraft being brought to market by Tecnam Aircraft Industries and it brings some material on applied industrial design in the open literature.

The purpose of this paper is to evaluate the accuracy of linear and quasi-steady aerodynamic models of aircraft aerodynamic models when a small unmanned aerial system flies in the presence of strong wind and gust at a high angle of attack and a high sideslip angle.

Compatibility analysis were done to improve the quality of recorded flight test data. A robust method called fuzzy logic modeling is used to set up the aerodynamic models. The reduced frequency is used to represent the unsteadiness of the flow field according to Theodorsen’s theory. The work done by the aerodynamic moments on the motions is used as the criteria of stability.

In portions of flight, aircraft’s stability and control derivatives were unstable and nonlinear functions of airflow angles and angular rates. The roll angle had an important effect on unsteadiness of directional oscillatory damping derivatives. The pilot-induced oscillation and wing rock possibilities were investigated and dismissed so that the lateral directional oscillatory motion was classified as a nonlinear Dutch roll oscillation. Major modeling enhancements or real-time parameter identification are required for the control of a small unmanned aerial system in off-nominal conditions. The robustness tests of all-weather autopilot systems must be done with consideration of sign change.

Oscillatory damping derivatives were reconstructed using flight test data and the inadequacy of engineering level software in predicting this type of instability observed and demonstrated for a flight in the presence of wind shear and external disturbances.

The purpose of this paper is to build a neural model of an aircraft from flight data and online estimation of the aerodynamic derivatives from established neural model.

A neural model capable of predicting generalized force and moment coefficients of an aircraft using measured motion and control variable is used to extract aerodynamic derivatives. The use of neural partial differentiation (NPD) method to the multi-input-multi-output (MIMO) aircraft system for the online estimation of aerodynamic parameters from flight data is extended.

The estimation of aerodynamic derivatives of rigid and flexible aircrafts is treated separately. In the case of rigid aircraft, longitudinal and lateral-directional derivatives are estimated from flight data. Whereas simulated data are used for a flexible aircraft in the absence of its flight data. The unknown frequencies of structural modes of flexible aircraft are also identified as part of estimation problem in addition to the stability and control derivatives. The estimated results are compared with the parameter estimates obtained from output error method. The validity of estimates has been checked by the model validation method, wherein the estimated model response is matched with the flight data that are not used for estimating the derivatives.

Compared to the Delta and Zero methods of neural networks for parameter estimation, the NPD method has an additional advantage of providing the direct theoretical insight into the statistical information (standard deviation and relative standard deviation) of estimates from noisy data. The NPD method does not require the initial value of estimates, but it requires a priori information about the model structure of aircraft dynamics to extract the flight stability and control parameters. In the case of aircraft with a high degree of flexibility, aircraft dynamics may contain many parameters that are required to be estimated. Thus, NPD seems to be a more appropriate method for the flexible aircraft parameter estimation, as it has potential to estimate most of the parameters without having the issue of convergence.

This paper highlights the application of NPD for MIMO aircraft system; previously it was used only for multi-input and single-output system for extraction of parameters. The neural modeling and application of NPD approach to the MIMO aircraft system facilitate to the design of neural network-based adaptive flight control system. Some interesting results of parameter estimation of flexible aircraft are also presented from established neural model using simulated data as a novelty. This gives more value addition to analyzing the flight data of flexible aircraft as it is a challenging problem in parameter estimation of flexible aircraft.

The present paper aims to assess the reliability and the limitations of analysing flight stability of a box-wing aircraft configuration known as PrandtlPlane by means of methods conceived for conventional aircraft and well known in the literature.

Results obtained by applying vortex lattice methods to PrandtlPlane configuration, validated previously with wind tunnel tests, are compared to the output of a “Roskam-like” method, here defined to model the PrandtlPlane features.

The comparisons have shown that the “Roskam-like” model gives accurate predictions for both the longitudinal stability margin and dihedral effect, whereas the directional stability is always overestimated.

The method here proposed and related achievements are valid only for subsonic conditions. The poor reliability related to lateral-directional derivatives estimations may be improved implementing different models known from the literature.

The possibility of applying a faster method as the “Roskam-like” one here presented has two main implications: it allows to implement faster analyses in the conceptual and preliminary design of PrandtlPlane, providing also a tool for the definition of the design space in case of optimization approaches and it allows to implement a scaling procedure, to study families of PrandtlPlanes or different aircraft categories.

This paper is part of the activities carried out during the PARSIFAL project, which aims to demonstrate that the introduction of PrandtlPlane as air transport mean can fuel consumption and noise impact, providing a sustainable answer to the growing air passenger demand envisaged for the next decades.

The originality of this paper lies in the attempt of adopting analysis method conceived for conventional airplanes for the analysis of a novel configuration. The value of the work is represented by the knowledge concerning experimental results and design methods on the PrandtlPlane configuration, here made available to define a new analysis tool.

The purpose of this paper is to present the methodology that was used to perform system identification of a dynamically unstable tilt-rotor from flight test data. The method incorporated wavelet transform into the maximum likelihood principle formulation, emphasizing both time and frequency responses. Using wavelets allowed to additionally filter noise in the data, and this increased the estimation quality. This approach did not require measurement and process noise modeling in contrast to the Kalman filter usage for parameter estimation.

In the study, lateral-directional stability and control derivatives of an unstable tiltrotor in hover were estimated. This was performed by applying the maximum likelihood output error method. The estimated model response was decomposed using the Mallat pyramid and matched to wavelet coefficients obtained directly from measurements. In addition, a coherence-based weighting function was used to put more emphasis on the most reliable data. For comparison, the same set of data was used to identify a model with the same structure using the maximum likelihood principle with an incorporated Kalman filter.

It was found that maximum likelihood principle and wavelet transform allowed for estimating aerodynamic coefficients of a dynamically unstable aircraft. The estimation was performed with high accuracy.

The designed method can be used for system identification of unstable aircraft and when additional noise is present (e.g. when noise due to turbulence was observable during the flight test or higher noise levels were present in the sensors data).

The paper presents verification of a wavelet-based maximum likelihood principle output error method using flight test data.

MANY AIRCRAFT built in the last six decades have been deficient (or even failures) in accomplishing their primary missions because of unsuitable stability and/or control characteristics.

There are three lateral dynamic attitudes, delineated by rolling, yawing, and sideslipping. It is possible to solve for the pressures on the rolling wing by quasi‐steady analysis. This approach is, however, inapplicable for the yawing or sideslipping wing, and it is with the latter two cases that this paper deals.