Search results

Gives a bibliographical review of the finite element methods (FEMs) applied for the linear and nonlinear, static and dynamic analyses of basic structural elements from the theoretical as well as practical points of view. The range of applications of FEMs in this area is wide and cannot be presented in a single paper; therefore aims to give the reader an encyclopaedic view on the subject. The bibliography at the end of the paper contains 2,025 references to papers, conference proceedings and theses/dissertations dealing with the analysis of beams, columns, rods, bars, cables, discs, blades, shafts, membranes, plates and shells that were published in 1992‐1995.

The purpose of the study is to obtain and analyze vibro-acoustic characteristics.

A unified analysis model for the rotary composite laminated plate and conical–cylindrical double cavities coupled system is established. The related parameters of the unified model are determined by isoparametric transformation. The modified Fourier series are applied to construct the admissible displacement function and the sound pressure tolerance function of the coupled systems. The energy functional of the structure domain and acoustic field domain is established, respectively, and the structure–acoustic coupling potential energy is introduced to obtain the energy functional. Rayleigh–Ritz method was used to solve the energy functional.

The displacement and sound pressure response of the coupled systems are acquired by introducing the internal point sound source excitation, and the influence of relevant parameters of the coupled systems is researched. Through research, it is found that the impedance wall can reduce the amplitude of the sound pressure response and suppress the resonance of the coupled systems. Besides, the composite laminated plate has a good noise reduction effect.

This study can provide the theoretical guidance for vibration and noise reduction.

The purpose of this paper is to attempt the buckling analysis of a laminated composite skew plate using the C₀ finite element (FE) model based on higher-order shear deformation theory (HSDT) in conjunction with minimax probability machine regression (MPMR) and multivariate adaptive regression spline (MARS).

HSDT considers the third-order variation of in-plane displacements which eliminates the use of shear correction factor owing to realistic parabolic transverse shear stresses across the thickness coordinate. At the top and bottom of the plate, zero transverse shear stress condition is imposed. C₀ FE model based on HSDT is developed and coded in formula translation (FORTRAN). FE model is validated and found efficient to create new results. MPMR and MARS models are coded in MATLAB. Using skew angle (α), stacking sequence (Ai) and buckling strength (Y) as input parameters, a regression problem is formulated using MPMR and MARS to predict the buckling strength of laminated composite skew plates.

The results of the MPMR and MARS models are in good agreement with the FE model result. MPMR is a better tool than MARS to analyze the buckling problem.

The present work considers the linear behavior of the laminated composite skew plate.

To the authors’ best of knowledge, there is no work in the literature on the buckling analysis of a laminated composite skew plate using C₀ FE formulation based on third-order shear deformation theory in conjunction with MPMR and MARS. These machine-learning techniques increase efficiency, reduce the computational time and reduce the cost of analysis. Further, an equation is generated with the MARS model via which the buckling strength of the laminated composite skew plate can be predicted with ease and simplicity.

The present investigation is concerned with the utilisation of the finite element technique for predicting the natural frequencies and the modal damping factor (also called the loss factor) of anisotropic fibre‐reinforced composite laminated plates. The simple definition of the modal damping factor is defined as the ratio of the strain energy dissipated per radian of vibration, in the mode of interest, to the total strain energy of the entire laminate at maximum displacement during the same cycle. Results for the vibration and damping analysis of multi‐layered plates obtained by the present methods are compared with the results obtained by other authors and with the results of experiments.

The purpose of this paper is to analyse the nonlinear flexural behaviour of laminated curved panel under uniformly distributed load. The study has been extended to analyse different types of shell panels by employing the newly developed nonlinear mathematical model.

The authors have developed a novel nonlinear mathematical model based on the higher order shear deformation theory for laminated curved panel by taking the geometric nonlinearity in Green-Lagrange sense. In addition to that all the nonlinear higher order terms are considered in the present formulation for more accurate prediction of the flexural behaviour of laminated panels. The sets of nonlinear governing equations are obtained using variational principle and discretised using nonlinear finite element steps. Finally, the nonlinear responses are computed through the direct iterative method for shell panels of various geometries (spherical/cylindrical/hyperboloid/elliptical).

The importance of the present numerical model for small strain large deformation problems has been demonstrated through the convergence and the comparison studies. The results give insight into the laminated composite panel behaviour under mechanical loading and their deformation behaviour. The effects of different design parameters and the shell geometries on the flexural responses of the laminated curved structures are analysed in detailed. It is also observed that the present numerical model are realistic in nature as compared to other available mathematical model for the nonlinear analysis of the laminated structure.

A novel nonlinear mathematical model is developed first time to address the severe geometrical nonlinearity for curved laminated structures. The outcome from this paper can be utilized for the design of the laminated structures under real life circumstances.

Numerous finite elements are proposed based on analytical solutions. However, it is difficult to find the solutions for complicated governing equations. This paper aims to present a novel formulation in the framework of assumed stress quasi-conforming method for the static and free vibration analysis of anisotropic and symmetric laminated plates.

Firstly, an initial stress approximation ruled by 17 parameters, which satisfies the equilibrium equations is derived to improve the performance of the constructed element. Then the stress matrix is treated as the weighted function to weaken the strain-displacement equations. Finally, the Timoshenko’s laminated composite beam functions are adopted as boundary string-net functions for strain integration.

Several numerical examples are presented to show the performance of the new element, and the results obtained are compared with other available ones. Numerical results have proved that the new element is free from shear locking and possesses high accuracy for the analysis of anisotropic and symmetric laminated plates.

This paper proposes a new QC element for the static and free vibration analysis of anisotropic and symmetric laminated plates. In contrast with the complicated analytical solutions of the equilibrium equations, an initial stress approximation ruled by 17 parameters is adopted here. The Timoshenkos laminated composite beam functions are introduced as boundary string-net functions for strain integration. Numerical results demonstrate the new element is free from shear locking and possesses high accuracy for the analysis of anisotropic and symmetric laminated plates.

The purpose of this paper is to develop a general mathematical model for laminated curved structure of different geometries using higher-order shear deformation theory to evaluate in-plane and out of plane shear stress and strains correctly. Subsequently, the model has to be validated by comparing the responses with developed simulation model (ANSYS) as well as available published literature. It is also proposed to analyse thermal buckling load parameter of laminated structures using Green–Lagrange type non-linear strains for excess thermal distortion under uniform temperature loading.

Laminated structures known for their flexibility as compared to conventional material and the deformation behaviour are greatly affected due to combined thermal/aerodynamic environment. The vibration/buckling behaviour of shell structures are very different than that of the plate structures due to their curvature effect. To model the exact behaviour of laminated structures mathematically, a general mathematical model is developed for laminated shell geometries. The responses are evaluated numerically using a finite element model-based computer code developed in MATLAB environment. Subsequently, a simulation model has been developed in ANSYS using ANSYS parametric design language code to evaluate the responses.

Vibration and thermal buckling responses of laminated composite curved panels have been obtained based on proposed model through a customised computer code in MATLAB environment and ANSYS simulation model using ANSYS parametric design language code. The convergence behaviour are tested and compared with those available in published literature and ANSYS results. Finally, the investigation has been extended to examine the effect of different parameters (thickness ratios, curvature ratios, modular ratios, number of layers and support conditions) on the free vibration and thermal buckling responses of laminated curved structures.

The present paper intends to give sufficient amount of numerical experimentation, which may lead to help in designing of finished product made up of laminated composites. Most of the aerospace, space research and defence organisation intend to develop low cost and high durable products for real hazard conditions by taking combined loading and environmental conditions. Further, case studies might lead to a lighter design of the laminated composite panels used in high-performance systems, where the weight reduction is the major parameter, such as aerospace, space craft and missile structures.

In this analysis, the geometrical distortion due to temperature is being introduced through Green–Lagrange sense in the framework of higher-order shear deformation theory for different types of laminated shells (cylindrical/spherical/hyperboloid/elliptical). A simulation-based model is developed using ANSYS parametric design language in ANSYS environment for different geometries and loading condition and compared with the numerical model.

This paper deals with the optimum design of composite laminated plates. Both ply orientation angles and ply thicknesses of the composite plate are used as design variables. The optimum design process is divided into two sublevels. In the first sublevel, the strain energy of the plate is minimized by changing the ply orientation angles while the ply thickness distributions remain unmodified. In the second sublevel, with the angle values obtained in the first sublevel, the optimum thickness distribution of each ply is obtained by minimizing the structural weight while satisfying stiffness and gauge constraints. The final optimum design is achieved by iterating between these two sublevels. The stiffness analysis is performed by the finite element method in which a triangular element is used that is suitable for from thin to thick plates and includes the transverse shear effects. All the derivative analysis is performed analytically. The mathematical programming method called Constrained Variable Metric is used to solve the optimum problem. An example is provided for a rectangular laminated plate with good results to show the effectiveness of the method.

A C° continuous finite element higher‐order displacement model is developed for the dynamic analysis of laminated composite plates. The displacement model accounts for non‐linear distribution of inplane displacement components through the plate thickness and the theory requires no shear correction coefficients. Explicit time marching schemes are adopted for integration of the dynamic equilibrium equation and a diagonal ‘lumped’ mass matrix is employed with a special procedure applicable to Lagrangian parabolic isoparametric elements. The parametric effects of the time step, finite element mesh, lamination scheme and orthotropy on the transient response are investigated. The effect of the coupling on the transient response is also investigated. Numerical results for deflections and stresses are presented for rectangular plates under various boundary conditions and loadings and compared with results from other sources.

A transient dynamic finite element procedure is presented for failure analysis of centrally‐impacted laminated composite pretwisted rotating plates. A nine‐noded, three‐dimensional degenerated composite shell element is developed and used for the present finite element formulation. Effects of transverse shear deformation and rotary inertia are included. The strength‐of‐material type failure criteria are adopted and the “total ply discount” approach is used as the stiffness reduction model. The dynamic equilibrium equation is derived by applying Lagrange’s equation of motion and the investigation is carried out for moderate rotational speeds for which the Coriolis effect is negligible. The modified Hertzian contact law is utilized to compute the contact force between the impactor and the laminated plate. Impact failure analyses of pretwisted rotating plates are performed to investigate the effects of angle of twist, rotational speed and laminate configuration.